Manage stand orders
Select Option

Devotrans Elek. Mak. San. Ve. Tic Ltd. Sti.

Maltepe Mah. Yilanli Ayazma Sk. N. 18/73 Zeytinburnu, 34010 Istanbul
Turkey

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Media files

DVT DEVOTRANSPRODUCT RANGE

Hall map

K 2022 hall map (Hall 11): stand A73

Fairground map

K 2022 fairground map: Hall 11

Contact

tanju erkoc

Phone
905335525300

Email
tanju@devotrans.com

Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.002  Measuring and test equipment for mechanical or dynamic properties
  • 03.10.002.01  Thickness gauges

Thickness gauges

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.002  Measuring and test equipment for mechanical or dynamic properties
  • 03.10.002.02  Measuring equipment for melt pressure
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.002  Measuring and test equipment for mechanical or dynamic properties
  • 03.10.002.03  Measuring equipment for tensile stress of film,sheet
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.002  Measuring and test equipment for mechanical or dynamic properties
  • 03.10.002.06  Measuring and test equipment for bending tests
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.003  Measuring equipment for melt tempeature
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.004  Measuring and test equipment for thermal properties
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.006  Measuring and test equipment for gaseous properties
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.007  Measuring and test equipment for electrical properties

Measuring and test equipment for electrical properties

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.009  Measuring equipment for moisture content

Measuring equipment for moisture content

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.010  Accelerated weathering equipment
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.011  Precision weighing equipment

Precision weighing equipment

Our products

Product category: Measuring and test equipment for bending tests

CHARPY-IZOD IMPACT TESTER DVT CD D 50IC

Used to measure breaking energy of materials subjected to impact.

TECHNICAL INFORMATION
Power input: 220 V 50 Hz.
Adjustable non-skid feet.
Emergency stop button.
Colour touch-screen.
Language options: Turkish, English, French and Russian
Possibility of starting test on touch-screen.
Possibility of selecting standard no., sample form, cross-sectional area, test type and hammer type.
Hammer’s drop angle: 155°.
Drop angle accuracy: 0.1°.
Display of current potential energy on touch-screen with 0.0001 joule accuracy.
Display of test time on touch-screen with 0.01 second accuracy.
Possibility of obtaining energy absorbed (J), impact strength (J/m2) and standard deviation results at the end of the test.
Possibility of storing up to 10 test results in memory.
Unit options for energy absorbed: Joule, kJ, kgf.m, N.m.
Unit options for impact strength: J/m2, kJ/m2, N.m/m2, kgf.m/m2.
Possibility of transferring test results in excel format to computer by means of usb to obtain test report in pdf format.
Protective shield and Plexiglas front lid.
Hammer won’t drop when Plexiglas lid is open as a safety measure.
Robust and reliable equipment that does not require any specific maintenance.
                  
Capacity                                                      Drop rate
1 J, 2 J, 4 J, 5 J  (CHARPY)                      2.9 m/s 
7.5 J, 15 J, 25 J, 50 J   (CHARPY)          3.8 m/s 
15 J, 50 J  (CHARPY pipe)                       3.8 m/s 
1 J, 2.75 J, 5.5 J, 11 J, 22 J (IZOD)       3.5 m/s   

OPTIONAL FEATURES
Charpy hammer
IZOD hammer and clamp
Hammer options in the range of 1 - 50 Joule

APPROXIMATE DIMENSIONS AND WEIGHT
Width: 110 cm
Depth: 46 cm
Height: 96 cm
Weight: 125 - 185 kg

RELEVANT STANDARDS
EN ISO 179-1 / TS EN ISO 179-1 (Charpy plastic)
TS ISO 9854-1 (Charpy pipe)
EN ISO 148-1 / TS EN ISO 148-1 (Charpy metal)
EN ISO 148-2 / TS EN ISO 148-2 (Charpy metal)
EN ISO 148-3 / TS EN ISO 148-3 (Charpy metal)
ASTM E23-02 (charpy/izod metal)
ASTM D256 (Izod plastic)
ISO 13802 / TS ISO 13802 (Charpy/Izod plastic)

More Less

Product category: Measuring and test equipment for tensile tests, Measuring equipment for tensile stress of film,sheet, Measuring and test equipment for bending tests

TENSILE COMPRESSION TESTING MACHINE DVT GP D NN

Used for measuring endurance of materials. If the option of extensometer is chosen, high precision measurements are possible.

TECHNICAL INFORMATION
Operating voltage: 220VAC, 50 Hz.
Power consumption is: max. 1 KVA.
Speed adjustment is between 0.001 -500.000 mm/min.
Colour touch screen.
Double columns, double screws system.
Emergency stop button.
Rapid return to the starting point.
Programmable stop option.
Sensitivity: ± 0.5%.
Motion sensitivity: 0,001 mm.
Force unit: Newton, kN, kg or MPa.
Stops, depending on the breakout, breakage and distance.
Turkish, English, French and Russia language options.

USED IN
Metal manufacturers,
Wire manufacturers,
Textile, footwear,
Plastic, rubber,
Automotive,
Medical supplies,
Forestry,
Construction,

SOME OF THE TESTS CAN BE APPLIED
Product testing, such as opening/closing, fracture, tearing, compression, breaking, stretching, permanent deformation, puncture.

OPTIONAL ADDITIONS
Different jaw models available.
Computer and printer connections.
Additional equipments for special tests.
Extensometer.
Warm - cold ambient test chambers.
Metal or plexiglas safety cage.
Light barrier.

MATERIALS CAN BE TESTED
Aluminum, copper, spring, sheet metal profile…
Steel, iron…
Jute, Cable, steel wire…
Plastic products, Automotive and supplier industry,
Forest products, Construction materials,
Glues,
Fabrics, leather, artificial leather, zipper,
Glass, porcelain, Paper etc.

RELEVANT STANDARDS
TS EN ISO 7500-1/527-3/6892-1/
TS 1398-1EN ISO 527-1

APPROXIMATE DIMENSIONS AND WEIGHT
Width : 83 cm
Depth : 52 cm
Height : 134 cm
Weight : 110 kg

More Less

Product category: Measuring equipment for melt tempeature

TOUCH-SCREEN MELT FLOW INDEXER (MFI) DVT EA DLC

It is used in the determination of the flow values of melted plastic.
It gives a quantitative value for the plastic’s flowing capacity during injection.

TECHNICAL INFORMATION
Colour touch-screen.
Test values are automatically obtained after simply entering the weight of the melted material.
Hardened steel melting tank .
Two insulated heating cells.
Structure that can be easily cleaned after each trial.
High thermal precision.
Automatic cut.
Body coated with hydrostatic powder paint.
Weights: 2.16 and 5 kg.
System with high precision thermal control.
User-friendly robust structure.
Capability of conducting measurement and calculation for MVR, MFR (A), MFR (B), FRR tests.
Hardened steel mould that can be easily placed and removed.
Functioning voltage: 220V, 50 Hz.
Cleaning set, apparatuses and accessories available.
Computer connection.
Automatic dispatch of test results to computer.
Possibility of connection with scale if it is compatible with device.
 
OPTIONAL FEATURES
Safety lid.
Automatic loading.
Various test weights as shown in table.
 
APPROXIMATE DIMENSIONS AND WEIGHT
Width : 44 cm.
Depth : 32 cm.
Height : 54 cm.
Weight : 25 kg.
 
RELEVANT STANDARDS
TS EN ISO 1133
DIN 53735
ASTM D1238
ASTM D3364
TS 11451
TS 418 EN 12201
TS EN ISO 15874
TS EN 253
 

More Less

Product category: Measuring and test equipment for tensile tests

CO EFFICIENT FRICTION TESTER DVT YS

Used to test friction resistance of various materials.
It allows to determine static and kinetic friction coefficient of materials using the horizontal plane method.

TECHNICAL INFORMATION
Operation voltage : 220 V 50 Hz.
Touch screen.
Graphic output from PC.
Static and dynamic co-efficient of friction (COF) values can be obtained.
Real time graphic.
Rapid return to the starting point.
Test speed, distance are adjustable.
Possibility to reach to the test archive.
Emergency stop button.
Test mass.
Force unit : N, kN, kgF, gF.
Turkish, English, French and Russian language options.
Test mass (gr):200, 800, 2700, 5000, 10000 (optional)
Sample size (mm): 63.5 x 63.5
Speed (mm/min): 500 – 1200 (optional)
Capacity (Newton): 30

OPTIONAL ADD-ONS
Test mass according to standards.
Customized design for paper sample test.

RELEVANT STANDARDS
ISO 6383
ISO 15359
ISO 8295
ASTM D 1894
ASTM D 2534
ASTM D 4521
ASTM D 3330
TS EN 1724
TS ISO 15359

APPROXIMATE DIMENSIONS AND WEIGHT
Width : 70 cm
Depth : 39 cm
Height : 29 cm
Weight : 31.5 kg

More Less

Product category: Measuring and test equipment for thermal properties

DIFFERANTIAL SCANNING CALORIMETRY EQUIPMENT DVT DSC

Used to observe variation of thermal capacity of plastics as a function of temperature.

It determines through calorimetry with differential scanning the oxidation – induction time (isothermal OIT) and the oxidation induction temperature (dynamic OIT) of polymeric materials.

TECHNICAL INFORMATION
Operating voltage: 220 Volt 50 Hz.
Computer connection.
Specific software.
High insulation oven.
Language options: Turkish, English, French and Russian.
Oxygen and nitrogen inlet.
Temperature resolution: 0.1 °C.
Heating speed: 20±2 °C/min.
Automatic gas regulation.

APPROXIMATE DIMENSIONS AND WEIGHT
Width: 45 cm.
Depth: 53 cm.
Height: 22 cm.
Weight: 20 kg.

RELEVANT STANDARDS
TS EN ISO 11357-6

ACCESSORIES
Sample receptacle and reference receptacle (50 adet).
Tongs.
Spoon.
Calibration control metal .

More Less

Product category: Measuring equipment for tensile stress of film,sheet, Measuring and test equipment for tensile tests, Measuring and test equipment for bending tests

TENSILE COMPRESSION TEST MACHINE DVT BP D NN

Single-column model used for capacities up to 3 kN.

Product testing, such as opening/closing, breaking, tearing, compression, fracture, stretching, permanent deformation, puncture, radial loading.

TECHNICAL INFORMATION
Stopping, depending on the Breakout/Fracture or distance.
Maintenance-free, solid and reliable structure.
Colour touch screen.
Rapid return to the starting point.
Emergency stop button.
2-column and single-screw system, monoblock.
Sensitivity: ±0,5%.
In tensile tests, the direction of the movement is upwards.
Operation Voltage is: 220VAC, 50 Hz.
Power consumption: max. 400 W.
Speed option between: 1.000 – 500.000 mm/min.
Specimen diameter (width) is maximum 210 mm.
 Movement precision: 0,001 mm.
Force unit: kgf, gf, kN, Newton etc.
Turkish, English, French and Russia language options.
 
OPTIONAL ADD-ONS
Custom made software.
Computer and printer connections.
Special jaws and additional units.
Speed option between: 0.001 – 500.000 mm/min. or 0.001 - 1000.000 mm/min.
Extensometer.
Warm-cold ambient test chambers.
Metal or plexiglas safety cage.
 
TEST SUBJECTS
Aluminum, copper, spring, sheet metal profile …
Cable, , conductive, socket 
Fabric, thread, jute ... 
Glass, porcelain, tiles …
Shoe, slipper…
Leather, artificial leather  
Rubber, plastic products … 
Glue, paper … 
Gauze, plaster …
Zipper …
 
APPROXIMATE DIMENSIONS AND WEIGHT
Largeur: 47 cm
Profondeur: 56 cm 
Hauteur: 142 cm 
Poids: 98 kg
 
RELEVANT STANDARDS
TS EN ISO 7500-1/527-3/6892-1
TS 1398-1 EN ISO 527-1
TS ISO 37
ASTM F 3067

More Less

Product category: Measuring and test equipment for gaseous properties

HALOGEN ACID GAS DETERMINATION TEST EQUIPMENT DVT HFT

Determines quantity, acidity and conductivity of gases generated as a result of the burning of inflammable materials and plastics in particular.

TECHNICAL INFORMATION
Timer.
Airflow display.
Temperature display.
High-temperature sensitivity.
Sample holders available.
Coated with electrostatic powder paint.
Metal parts in contact with heat are chromed.
Air inlet available.
Operating voltage: 220V, 50 Hz.
pH-meter and Conductivity-meter (optional)
Resolution (pH-meter): 0.1
Resolution (conductivity-meter): 1
 
OPTIONAL ADD-ONS
pH-meter and conductivity-meter (optional).
Various glass containers.
Scale.
 
APPROXIMATE DIMENSIONS AND WEIGHT
Width: 145 cm.
Depth: 40 cm.
Height: 50 cm.
Weight: 51 kg.
 
PROVIDED WITH THE EQUIPMENT
Vibration device.
2 trial bottles.
Vessel.
  
RELEVANT STANDARDS
TS EN 50267-2-2
TS EN 50267-2-1
TS 1852
ISO 1408
ASTM D 1603
ISO 6964
IEC 60754-1
IEC 60754-2
TS EN 60754-2
TS EN 60754-1
 

More Less

Product category: Measuring and test equipment for tensile tests

ELASTOMERS ABRASION TESTER DVT DA 6

Abrasion testing is for determining the rate of abrasion in elastomers.

TECHNICAL INFORMATION
Cylinder diameter : 150 mm
Cylinder length : 500 mm
Speed of drum : 40± 1 rev. /min.
Abrasion pressure : 5N (510 gr±0,2) ve 10N (1020 gr±0,2 )
Test sample diameter: 16 mm
Progress step : 4,2 mm
Max. experiment stroke: 40±0, 2 meter.
By using electronic stroke metering unit, test can be stopped at required distance.
Unit automatically stops at pre selected distance.
Death end feature stops the unit in any case.
Abrasive size : 400x500 mm
Regulated Operation Voltage: 50 Hz 220 Volt 180-240 AC
Unit is equipped with TAG switch system.
Grounded Plug – fuse protected
Electrostatic powder paint is used.
Unit has an easy-to-use sample holder clamp.
Sample Holder with rotary heat.
 
OPTIONAL ADDITIONALS
Dust absorbent unit.
Metal-wear model with various mass  and clamps
Special sample holders
Calibrated sandpaper can be attached.
Etalon calibrated rubber.
 
APPROXIMATE DIMENSIONS AND WEIGHT
Width :80 cm.
Depth :35 cm.
Height : 37 cm.
Weight :55 kg
 
RELEVANT STANDARDS
ISO 4649
ISO 20 344
DIN 53 516
TS EN ISO 12 947 / 20344
TS 11007/5548
ISO 20871
ASTM D 5963-4

More Less

Product category: Measuring and test equipment for tensile tests

IMPACT TEST DEVICE FOR PLASTIC FILM AND PLATE DVT SAH F

For testing resistance of plastic films and plates to impacts by means of weights provided with the equipment.

TECHNICAL INFORMATION
Adjustable pedestals with spirit level.
Provided with 2 sets of test weights.
Sample dimensions : 200*200 mm.
Air pressure : 8 bar.
Led light.
Drop system with air pedal.
Sample-holder with air control system.
Height-meter.
Operating voltage : 220 V 50 Hz.
Two different impact tips and weight sets complying with the standards.
Aluminium sphere diameter : 38 mm (Method A)
Metal sphere diameter : 50 mm (Method B)
Drop height : 66 cm (Method A) 150 (Method B)
Foot pedal controlled.
 
APPROXIMATE DIMENSIONS AND WEIGHT
 Width : 51 cm.
Depth : 64 cm.
Height : 204 cm.
Weight : 39 kg.
 
RELEVANT STANDARDS
TS EN ISO 7765-1
ISO 7765-1
ASTM D 1709
GB/9639
 
 

More Less

Product category: Measuring equipment for melt pressure, Measuring equipment for melt tempeature

HOT WIRE TEST EQUIPMENT DVT YAN KT

Used to observe melting and scorching on plastics subjected to high temperatures caused by high current and to determine whether the sample remains within burning limits.

TECHNICAL INFORMATION
Power input: 220 V, 50 Hz.
Pressure weight: 100 gr.
Wooden dropping plate.
Temperature display.
Current display.
Temperature setting: 370°C-1000°C.
High accuracy scale for measuring flame length.
Holder plate adjustment depending on the sample.
Control and stabilization system: microprocessor.
Time display.
Fully automatic engine driving.
Timer starts automatically when the sample contacts the wire and the sample carriage turns back at the end of the predetermined time span.
 
USED IN
Plastics industry.
Electrical equipment manufacturing.
 
RELEVANT STANDARDS
TS EN 60695
IEC 60695
IEC 60529
 
APPROXIMATE DIMENSIONS AND WEIGHT
Width : 53 cm.
Depth : 44.5 cm.
Height : 47 cm.
Weight : 27.5 kg.

More Less

Product category: Measuring and test equipment for gaseous properties

LIMITING OXYGEN INDEX TESTER DVT LOI

This piece of equipment is used to find out the smallest oxygen mixture that is required for plastics to go on burning.

TECHNICAL INFORMATION
The oxygen measurement unit is of US origin.
Time measurement unit.
Heat-resistant glass.
Pressure display.
Monitoring of the quantity of the passing mixture.
High thermal sensitivity.
Sample holders available.
Coated with electrostatic powder paint.
Metals in contact with heat are chrome.
Pre-heating option.
Pre-heating controlled by an independent button.
Operating voltage:  220V, 50 Hz.
Comes with a gas regulator.
Runs on gaseous oxygen and nitrogen.
 
OPTIONAL ADD-ONS
The gases required for the test are available in the form of a set.
 
RELEVANT STANDARDS
EN ISO 4589-3
TS 11162-3
 
APPROXIMATE DIMENSIONS AND WEIGHT
Width: 66 cm.
Depth: 34 cm.
Height: 80 cm.
Weight: 22.5 kg.

More Less

Product category: Measuring and test equipment for bending tests

SCRATCH HARDNESS TEST DEVICE DVT PCD

A handy device for measuring scratch hardness and resistance to scratching of laminated, glass or plastic surfaces.

TECHNICAL INFORMATION
Load choices : 1 N or 10 N
Maximum sample dimensions (WxDxH) : 100x100x22 mm.
Power supply: 230 V/50 Hz.
Speed:  5 rpm ± 1
Scratching is measured under weight.
Weight setting
Millimetric setting unit
 
OPTIONAL ADD-ONS

COMPLEMENTARY PRODUCTS
Magnifier
Water gauge
Diamond point
 
APPROXIMATE DIMENSIONS AND WEIGHT
Width: 32 cm.
Depth:  50 cm.
Height:  25 cm.
Weight:   7.5 Kg.
 
RELEVANT STANDARDS
EN 438-2
DIN 53799+B365
ISO 4586-2
DIN 55 350-18
TS EN 14688

More Less

Product category: Measuring and test equipment for thermal properties

TEST EQUIPMENT FOR ENVIRONMENTAL STRESS CRACKING PROGRESSION DVT ESCR

Determines the strength to environmental cracking progression of pipes made from polyolefin plastics under a given temperature, in a given chemical environment and under a given stress.

TECHNICAL INFORMATION
Operating voltage: 220 Volt 50 Hz.
Temperature and time display.
Possibility of testing with 18 samples.
Notching apparatus.
Sample folding clamp to bend sample.
Notch comparator to determine notch depth.
Sample tray.
Possibility of testing in liquid by adding liquid in vessel.
Sound and light warning upon expiration of test time.
High thermal insulation.
Temperature accuracy: ± 1 % °C.
Stainless steel inner body.
Body coated with electrostatic powder paint.
 
RELEVANT STANDARDS
ASTM D 1693
TS EN ISO 60811-406
 
APPROXIMATE DIMENSIONS AND WEIGHT

Together with the apparatuses

Width: 65 cm.
Depth: 65 cm.
Height: 45 cm.
Weight: 43 kg.
 
ACCESSORIES
Notching blade.
Notching apparatus.
Sample cutting blade.
Sample-holding/handling tongs.
Sample bending apparatus.
Sample holder.
Sample rack.
Glass tube.
Stopper.
 

More Less

Product category: Measuring and test equipment for tensile tests

DEVICE FOR PREPARING PLASTIC SAMPLES DVT NP CNC

Used to prepare test samples from plastics, pipes, laminated products etc.

TECHNICAL INFORMATION
Maximum cutting thickness: 60 mm.
Possibility of defining dimensions in computer for different bowtie-shaped samples complying with the standards.
The device won’t start when the lid is open.
Maximum cutting dimensions: 150x360 mm.
Cutting tray dimensions: 400x530 mm.

OPTIONAL ADD-ONS

Cutting capacity up to 80 mm in sample thickness.

RELEVANT STANDARDS
ISO 6259-2 (Type 1)
ISO 6259-3 (Type 3)
ISO 13953 (Type 3, Type A1, Type A2)
ASTM D 638-08 (Type 1, Type 2, Type 3, Type 5)

APPROXIMATE DIMENSIONS AND WEIGHT
Width: 93 cm
Depth: 79 cm
Height: 90 cm
Weight: 127.5 kg

More Less

Product category: Measuring equipment for melt pressure, Measuring and test equipment for tensile tests

WATERPROOFNESS TESTER FOR TEXTILES AND MEMBRANES DVT SGT H DLC

Used to test waterproofness of textiles or coated textiles under specific pressures.

It determines the pressure under which textiles, fabrics coated with rubber or plastic and materials used for shoes or boots are no longer waterproof.

TECHNICAL INFORMATION
Operating voltage: 220 Volt 50 Hz.
Body coated with electrostatic powder paint.
Maintenance-free robust and reliable structure.
Water drainage outlet.
Sample area lighting lamp.
Sample-holder’s mouth equipped with an o-ring seal.
Colour touch screen.
Language options : Turkish, English, French, Russian, Italian.
Two different rates of pressure increase.
Pressure speed : 10 cm H2O/min or 60 cm H2O/min.
Pressure units : mm H2O, cm H2O, Pa, mbar, bar.
Measurement range (optional) :
50 mbar - 2000 mbar (50 -2000 cm H2O)
100 mbar - 4000 mbar (100 - 4000 cm H2O)
200 mbar - 8000 mbar (200 - 8000 cm H2O)

USED IN
Plastic-/rubber-coated fabrics.
Textiles.
Shoes.
Canvas.
Bags.
Tarpaulin.

RELEVANT STANDARDS
ISO 811
TS 257
DIN 52 123
TS 1974/1974 EN 1734
TS EN 1928
TS EN 1931

APPROXIMATE DIMENSIONS AND WEIGHT
Width: 60 cm.
Depth: 30 cm.
Height: 43 cm.
Weight: 35 kg.

More Less

Product category: Measuring and test equipment for tensile tests

LEAK TESTER DVT VK E

Leakage tester is designed for the leakage tests of packages for food, drugs, medical instruments, electronic components, stationeries and other industrial products.

Leakage test is performed in vacuum environment.

TECHNICAL INFORMATION
Vacuum value is read on digital display.
Test period is read on digital display.
Test period is pre-entered. Audible warning at the end of the test.
Test duration : between 1-99 min.
Easy to use.
Deformation under vacuum, observed by the transparent cabin.
Vacuum, up to -500 mbar.
Suitable for water or air environment tests.
Max. sample diameter: 18 cm.
Max. sample height: 32 cm.
Volume: 8 cm.
 
OPTIONAL ADD-ONS
Model with big reservoir

Max. sample diameter: 39 cm
Max. sample height: 35 cm
Volume: 42 cm
 
APPROXIMATE DIMENSIONS AND WEIGHT
Width : 500 mm.
Depth : 600 mm.
Height : 680 mm.
Weight : 31 kg.
 
RELEVANT STANDARDS
ASTM D3078-02
GB/T 15171

More Less

Product category: Measuring and test equipment for tensile tests

FRICTION TEST DEVICE FOR PRINTED MATERIAL DVT BMS

The device is used to find out the amount of scratching that occurs on wet or dry printed materials as a result of friction.

TECHNICAL INFORMATION
Speed of friction can be set
Possibility to chose from different friction lengths
Test period counter
Various pressure forces can be applied
Tests in wet or dry environment
1 sample station
Pressure weight: 900 gr. and 1800 gr.
 
OPTIONAL ADD-ONS
Different weights
 
TEST SUBJECTS
Paper
Packaging
Corrugated paper
Folded cardboard
Labels on packaging
Products with a printed surface
 
APPROXIMATE DIMENSIONS AND WEIGHT
Width: 350 mm.
Depth: 450 mm.
Height: 230 mm.
Weight: 25 Kg.
 
RELEVANT STANDARD
ASTM D-5264

FIELDS OF APPLICATION
Printing houses
Label manufacturers
Non-woven manufacturers
Textile/ready-made garment printing facilities

More Less

Product category: Measuring and test equipment for tensile tests

TORQUE-METER DVT TO T

It is used to measure torque force for connectors used in the medical products industry.

It is used to conduct resistance to overriding tests, disconnection by unscrewing tests and resistance to separation from unscrewing tests.

MATERIALS CAN BE TESTED
Medical products.
Medicine bottles and caps.
Rotary keys.
Metals, plastics etc.

TECHNICAL INFORMATION
Operating voltage: 220 Volt 50 Hz.
Emergency stop button.
Colour touch-screen.
Language options: Turkish, English, French and Russian.
Test report printout with software.
Torque unit: N.m and lbf.in.
Jaw options for different sample sizes.
Test weight: 27.5 Newton.
Test capacity: 2 N.m.
Movement: tightening and untightening (unscrewing) directions (to both sides: right and left).
Resistance to overriding tests include screwing only, disconnection by unscrewing tests include tightening followed by untightening, resistance to separation from unscrewing tests include tightening followed by untightening for a given period of time.

APPROXIMATE DIMENSIONS AND WEIGHT
Width: 50 cm.
Depth: 48 cm.
Height: 96 cm.
Weight: 60,4 kg.

RELEVANT STANDARDS
TS EN ISO 80369-7
TS EN ISO 80369-20

OPTIONAL FEATURES
Different jaws (holders) for different samples.
Different test capacities for different samples.
Different test weights for different samples.
Different jaws (holders) for measuring torsion force of materials such as metals etc.

More Less

Product category: Measuring and test equipment for bending tests

IZOD, CHARPY NOTCH MAKING MACHINE DVT CDA

Used to prepare samples for charpy and izod impact tests

TECHNICAL INFORMATION
Different  forms of radius notches can be machined according to  various Standards.
The notches are at different radius and angles.
Micrometer notches at 0.01 sensitivity.
Continuous  machining is possible with electric motors.
1 TS EN ISO 179-1 A type notch knife is given together with the machine.
 
OPTIONAL ADD-ONS
Notch knives for various Standards;
ISO 180  Type A, Type B
ISO 179 Type  A, Type B, Type C
Digital micrometer.
Safety lid.
 
TEST SUBJECTS
Plastic
 
APPROXIMATE DIMENSIONS AND WEIGHT
Width : 440 mm.
Depth: 240 mm.
Height : 200 mm.
Weight: 22 Kg.
 
RELEVANT STANDARDS
ISO 148-3
ISO 2818
ASTM 6110
ISO 8256
ASTM D 256
DIN 53453
TS EN ISO 179-1
TS EN ISO 180

More Less

Product category: Measuring and test equipment for thermal properties, Accelerated weathering equipment

DRYING OVEN DVT ET 50

Used in all sectors especially in textile, plastic and rubber industries.

Also used for sterilization, drying, dehumidification, baking purposes in different industries.

TECHNICAL INFORMATION
Cabinet and door insulation seals are made of high temperature resistant silicone.
By means of air circulation, uniform temperature is provided in entire cabin.
Temperature setting : Can be set between ambient temperature +5°C and 200°C ,by ± 1°C accuracy.
In quality control laboratory, used for dehumidification by heating.
Micro- processed thermostat provides accurate temperature control.
Cabin interior is made of stainless steel or porous film coated aluminum.
Energy saving due to efficient thermal insulation.
Control panel is equipped with TAG switch system and membrane.
Electrostatic powder paint coated frame.

APPROXIMATE DIMENSIONS AND WEIGHT
Width : 78 cm
Depth : 51 cm
Height : 57 cm
Weight: :44 kg

OPTIONAL ADDITIONS
Large volume special cabins.
Extra shelf or hanger.
Devices for hot – ambient experiments.
Temperature cabins for tensile – compression machines.
Accurate temperature controlled models from ambient temperature up to 250 °C.
Special manufacturing under 250-300° C for ET 50.

RELEVANT STANDARDS
TS 9764 HD 22.S3
TS EN 50086 / 1604
TS 7204 EN 60811-1-2
TS 1435 / 7422 / 11451
TS 7421 EN 60811

More Less

Product category: Measuring and test equipment for electrical properties

ELECTRICAL RESISTANCE TEST SET DVT EDT

Electrical test sets are used to conduct electrical resistance test on shoes.

TECHNICAL INFORMATION
Test tray consisting of copper-covered conductive plate and non-conductive plate.
Electrodes for electrical resistance test.
Stainless steel balls.
Thongs for electrical resistance test.
Options of conducting test with 50, 100, 250, 500 or 1000 Volt.

TEST SET CONTENT
Steel balls.
Test tray.
Electrical resistance tester.
 
APPROXIMATE DIMENSIONS AND WEIGHT
Width: 50 cm
Depth: 30 cm
Height: 6 cm
Weight: 6.5 kg (test set)
 
RELEVANT STANDARDS
EN ISO 20344:2011

More Less

Product category: Accelerated weathering equipment

ULTRAVIOLET LIGHT CABIN - DVT UV ET

Simulates adverse conditions such as fading, colour change, loss of brightness, opacity, brittleness, loss of strength and oxidation for comparison purposes.

The model DVT UV ET is able to conduct tests from room temperature to +100 °C and functions as an oven in addition to its ultraviolet light cabin feature.

TECHNICAL INFORMATION
Operating voltage: 220 Volt 50 Hz.
Shelf height adjustment.
Stainless steel cabin inside.
Body coated with electrostatic powder paint.
#1 300-Watt UV lamp.
Timer.
Temperature display.
Air circulation to ensure homogeneous inner temperature.
Maximum distance to source of light: 83 cm

OPTIONAL ADD-ONS
Front-side glass lid.
Customized dimensions.
Special test apparatuses inside the cabin.
Internal illumination.

APPROXIMATE DIMENSIONS AND WEIGHT
Width : 68 cm
Depth : 59 cm
Height : 124 cm
weight: 80 kg

More Less

About us

Company portrait

DVT DEVOTRANS designs its products under its own organization and manufactures them in its own facilities.

Besides its over 600 standard design products, DVT DEVOTRANS also undertakes custom designs and productions.

Such custom designs may be of the nature of developments built on existing designs or totally new creations.

Thanks to its knowledge and experience in the field of design, DVT DEVOTRANS is capable of meeting a major part of the test equipment requirements of a number of different sectors.

Company information as a PDF file