R.K.Texparts

Hot needle perforation machines, which is called a "Mona Lisa" for the word perforation, because it is just not a heated needles are perforating through the materials but it has need a that level of accuracy as well as reliability to do so.
R.K is one of them for the Hot perforation machine, we are serving in line Hot perforation machine as well as hot Perforation unit (Roll to roll type)
Our In Line Hot perforation machine is developed on such a way that if it will be set up on any running web , then this would be feel you like a its made for that machine only.
We are providing consulting, developing and manufacturing of the Hot perforation machine for the any material.
Our in line set up having a following specialties.
We are manufacturing a separate Hot perforation machine for high production demands.
All of our hot perforation machine was designed and developed for some particular application and as per the material demand.

In Line Hot perforation unit to immediate start of the hot perforation in your existing plant like Extrusion, Lamination, Slitter,etc..
This design is specifically intended to start the hot perforation at some specific line speed.

hot perforation in range from 0.2 to 2.5mm in dia and length up to 1200mm.
Heating Type: Externally (IR Heaters) + internal (Cartige Heater)
Perforation : parallel or Staggred
Bristle: Tampico Fibre with composite based for heating application.
Automation : Delta Automation with HMI.

By providing world class perforating roller since last 12 years, we are now serving To furnish the varied necessities of our customers in best possible way to the word “perforation” ,by presenting this Cold Needle Perforating Machine.

Quality ,Accuracy, Reliability and Life this are the main attributes behind developing the machine by R.K.Texparts.

By describing the design, this machine has beendesigned on such a way to arrange at anywhere,where perforation need. In simple words this is Inline Perforation Stand, which can accommodate at any place where perforation needed.

All of the small parameters has been taken considered while designing. R.K is very earlier in thi sfield, by use of this experience the company developed such a product which is very reliable and cost effective for the process of Perforation.

Specialty of the machine: 

• One Step By Pass Mode,
• Step Up Adapter for Quick Removing Perforation Shaft,
• Penetration Scale for accurate perforating

Customized Design Material : Hdpe, Ldpe, Bopp, PP, Paper , etc.
Length : 400 – 4200mm
Pins : 0.62 to 7.00mm
Pin Density:  Minimized up to 80 pins / cm2

we are supplying a perforating rollers for entire AD Star series like Micro , Nano and Macro.

the pins used in AD Star series perforation rollers are specially made with fine quality of steel material with specific HRC for a low wear and long life.