Panjin Zhongrun High Performance Polymer Co. Ltd.
Fine Chemical Industry Zone, Wujia Town,
65292
Panjin, Liaoning
China
China
Telephone +86 427 2852678
This company is co-exhibitor of
BIEGLO GmbH
Location
Hall map
Fairground map
Contact
Lara Hartmann
Marketing & Sales
Email
l.hartmann@bieglo.com
Our range of products
Product categories
- 01 Raw materials, auxiliaries
- 01.01 Thermoplastics
- 01.01.070 Polyetheretherketone (PEEK)
Polyetheretherketone (PEEK)
Our products
Product category: Polyetheretherketone (PEEK)
PEEK Granules
Panjin Zhongrun Plastics offers Polyetheretherketon (PEEK) granules in various viscosities. They find application in extrusion of semi-finished products, injection molding, compounding, coatings, filament and film extrusion.
Our CoPEEK 012G with high-viscosity is suitable for processing by extrusion and injection molding, thus it is the standard type for the production of semi-finished products.
Our CoPEEK 021G with medium viscosity is suitable for injection molding. But it can also be extruded for the production of films and filaments.
Our CoPEEK 085G with low viscosity is suitable for the extrusion of films and filaments. It is also used as basis for compounds and composites.
Our CoPEEK 125G with very low viscosity is suitable for injection molding of thin-walled, complex components. It is also used to make highly filled compounds.
Polyetheretherketone can be processed on machines for thermoplastics without any problems. We recommend a processing temperature of 360 °C to 380 °C.
CoPEEK is certified according to EU 10/2011 and also has FDA certification."
Our CoPEEK 012G with high-viscosity is suitable for processing by extrusion and injection molding, thus it is the standard type for the production of semi-finished products.
Our CoPEEK 021G with medium viscosity is suitable for injection molding. But it can also be extruded for the production of films and filaments.
Our CoPEEK 085G with low viscosity is suitable for the extrusion of films and filaments. It is also used as basis for compounds and composites.
Our CoPEEK 125G with very low viscosity is suitable for injection molding of thin-walled, complex components. It is also used to make highly filled compounds.
Polyetheretherketone can be processed on machines for thermoplastics without any problems. We recommend a processing temperature of 360 °C to 380 °C.
CoPEEK is certified according to EU 10/2011 and also has FDA certification."
Product category: Polyetheretherketone (PEEK)
PEEK Powders
BIEGLO offers PEEK powders in various viscosities. They find application in extrusion of semi-finished products, injection molding, compounding, coatings, filament and film extrusion.
Our CoPEEK 012P with high-viscosity is suitable for processing by extrusion and injection molding, thus it is the standard type for the production of semi-finished products.
Our CoPEEK 021P with medium viscosity is suitable for injection molding. But it can also be extruded for the production of films and filaments.
Our CoPEEK 085P with low viscosity is suitable for the extrusion of films and filaments. It is also used as basis for compounds and composites.
Polyetheretherketone can be processed on machines for thermoplastics without any problems. We recommend a processing temperature of 360 °C to 380 °C.
CoPEEK is certified according to EU 10/2011 and also has FDA certification.
Our CoPEEK 012P with high-viscosity is suitable for processing by extrusion and injection molding, thus it is the standard type for the production of semi-finished products.
Our CoPEEK 021P with medium viscosity is suitable for injection molding. But it can also be extruded for the production of films and filaments.
Our CoPEEK 085P with low viscosity is suitable for the extrusion of films and filaments. It is also used as basis for compounds and composites.
Polyetheretherketone can be processed on machines for thermoplastics without any problems. We recommend a processing temperature of 360 °C to 380 °C.
CoPEEK is certified according to EU 10/2011 and also has FDA certification.
About us
Company details
Panjin Zhongrun Plastic was established in 2009 in the Liaoning Province, in the North of China. They possess various patents of High Performance Polymer synthesis: the most important being the patent for polyether ether ketone production. It has built and started up a PEEK plant with a capacity of 1,000 tons / year. The PEEK-products are sold to Europe, China, America, Japan and Korea.
Panjin Zhongrun closely co-operates with BIEGLO GmbH in Europe. Both companies adhere to their companies tenet – Quality First, Integrity and Continuous Improvement. BIEGLO is the exclusive distributor of CoPEEK in Europe.
Panjin Zhongrun closely co-operates with BIEGLO GmbH in Europe. Both companies adhere to their companies tenet – Quality First, Integrity and Continuous Improvement. BIEGLO is the exclusive distributor of CoPEEK in Europe.
Company data
Number of employees31 - 100
Foundation2009
Area of businessRaw materials, auxiliaries
Target groupsPlastic product manufacturing