M/s SANGIR PLASTICS PVT LTD. of Mumbai at K 2019 in Düsseldorf -- K Trade Fair
Manage stand orders
Select Option

M/s SANGIR PLASTICS PVT LTD.

3rd Floor, Mandhana Enclave, Nr. Canara Bank, Bangur Nagar, Goregaon (W), 400104 Mumbai
India

Hall map

K 2019 hall map (Hall 5): stand B03-02

Fairground map

K 2019 fairground map: Hall 5

Contact

Anand Mandhana

Phone
+91 22 28717800 / +91 7045388831

Email
mktg.exports@sangir.com

Our range of products

Product categories

  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.01  Processing technologies
  • 02.01.002  Products made by extrusion
  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.01  Processing technologies
  • 02.01.008  Parts made by rotation moulding

Our products

Product category: Hoses

Sangir Industrial Non Metallic Piping System - PPH / PVDF/ HDPE & Corzan CPVC Pipes, Fittings & Valves

Sangir manufactures and supplies Pipes, Fittings and Valves. 
Piping accessories such as spool-pipes, manifolds, mixer-tees, diffusers and non-standard connections are also manufactured by us. We also carry out installation and commissioning of thermoplastic piping systems on-site.

Sangir Industrial Piping System finds application is handling chemicals, acids, galvanising plants, pickling processes, ETP, desalination plants,  etc. A cost effective option over conventional piping systems, such as FRP, PP-FRP, MS-RL and Metallic piping.

Sizing Range:
  • PPH Piping System - 20mm OD to 630mm OD 
  • PVDF Piping System - 20mm OD to 200mm OD
  • CPVC Piping System - 1/2" OD to 12" OD
  • HDPE Piping System - 20mm OD to 1200mm OD

More Less

Applications
Plumbing & Heating

Target Products
Tube/Hose, Complex Geometry

Product category: Products made by extrusion, Hoses

Sangir Non Metallic Piping System for Infra Applications

Sangir HDPE Piping System is a cost effective solution for Water, Waste - Water,  Raw Water Pipelines, In-take Water Pipelines, Drainage and Effluent Disposal Line Applications. 

Sizing Range: 20mm OD to 1200mm OD

Tega Electrofusion fittings of a wide range are available alongwith Butt Fusion, Socket Fusion and Compression Fittings.

More Less

Applications
Supply

Target Products
Tube/Hose, Solid

Product category: Products made by extrusion

Sangrip PE T-Rib Concrete Liner Sheets

The SanGrip Concrete PE Liner sheets which can be procured from Sangir both in sheet or in roll form. The welded sheets/rolls are placed in concrete pipe or structural forms and attached by mechanical means so that they hold a fixed position when concrete is poured. The profiled side always faces the concrete, mortar or grout. When the concrete is delivered and consequent vibration of the same, it is to be ensured that the concrete has flowed around the projecting T-Ribs fully for best results.

Available in dual colours and thickness upto 5mm.

More Less

Applications
Disposal

Target Products
Tube/Hose, Colored, Printed/Decorated, Solid

Product category: Products made by extrusion

Plastnova Sheets - Rigid and Liner

Sangir manufactures high quality non metallic sheets from HDPE, PP/PPH, PVDF, CPVC, PVC and their compounds. The Sheets are sold under the brand name Plastnova.
Sheets are available in forms rigid, flexible, liner, glass- lined, fabric- lined, foam and textured.
Plastnova Sheets find application in Acid & Chemical Proof Flooring, Non-contamination Barrier around Storage Tanks in Tank Farms, Wall Cladding, Ceiling Solution, Silent rooms and Clean rooms.

More Less

Applications
Door/Window, Floor, Wall, Ceiling

Target Products
Film/Sheet, Transparent, Colored, Shiny, Printed/Decorated, Structured

Product category: Products made by extrusion

Waste Conveyance System

Sangir offers the following chute solutions for various needs.
* Garbage Chute
* Linen Chute
* Debris Chute

 Kleanchute offers high quality & technologically advanced stainless steel chutes to assist in this centralized collection & disposal of waste or linen. Advanced solutions such as electronic interfaces, automatic cleaning systems, fire security alarm integration etc have made such chutes very safe to use and widely accepted worldwide.   

Kleanchute Debris Chutes are made from High Molecular High Density Polyethylene (HMHDPE) to provide effective solution to safe and pollution free disposal of debris in contruction sites

More Less

Product category: Parts made by rotation moulding

PE Manholes & Chambers For Drainage Systems.

Manholes Inspection Chambers made to EN13598 standards in internationally accepted design are available in sizes ranging from 400mm to 1200mm. The Manholes are manufactured using Roto Moulding Technique and are widely used due to their durability, light weight and easy installation.
HDPE Manholes provide easy flow of media and has high resistance to bacteria and temperature. The Manholes are environment friendly as there is no ex-filtration or in-filtration. They have zero maintenance charges and can be used for decades to come.

Standards PE Manholes are manufactured as per following standards:
EN 13598-1:2003;
EN 13598-2:2009
EN 476

The Sangir PE Manhole is a modular system that allows for various combinations.

Features:

• Excellent dissipation of downward load and upward back-pressure away from manhole
• Made out of 100% virgin material
• Monolithic construction
• Strong and durable Plastic Steps
• Sturdy design
• Quick construction
• Compliance with requirements of EN 13598


Advantages of PE Manholes:
• Light weight and durable
• Leak proof system
• No infiltration or exfiltration
• Environment friendly
• Optimized Project execution
• Highly resistant to heat& chemicals
• Excellent resistant to bacteria
• Smooth flow of media
• Modular System

More Less

Product category: Parts made by rotation moulding

Dredging Pipline Floats

Hose and Cable Floats are primarily meant for the Single Point Mooring , Mining and Cable Floatation Applications. The Floats have open rounded edges to provide flexibility of movement to the hoses/ cables to adjust to currents and wind. Rubber pads are provided for tight fitment. These Floats are filled with PU as a standard.

Features & Advantages:

• Light weight
• Easy installation
• Abrasion resistant
• Eco friendly Pu filled
• UV resistant
• Good visibility even from distance



Applications:

• Single Point mooring
• Floating Pipes for Gold and Other Mines
• Floating Cable Offshore
• Small Area marking

More Less

Target Products
Tube/Hose

About us

Company details

Sangir, offers a broad range of Thermoplastic Piping, Sheet & Roto-Molded Solutions in HDPE, PP, PVDF, PVC, PFA & HIPS, ABS and PC for applications across all industries water, effluent, gas, fuel, slurry, air, transfer, storage and containment, well suited for usage in Sulfuric and other Acid Plants. We have a range of Liners which are a cost effective solution to waste water, water treatment and other enviro projects.

 Sangir, specializes in the manufacturing of PVDF, CPVC Pipes, fittings and valves, PVC Sheets, which are specifically used for Sulfuric and Phosphoric Acid Plants applications in DM Water Plants, sulfuric-acid lines of sulfuric-acid plants and acid rejuvenation plants phosphoric acid lines, nitric acid lines and alkaline lines. Pipes for condensate effluents, slurry and for effluent management. Piping for Dozing and effluent passivation lines, scrubber pipelines and lamella pipelines. PVDF is found to be a suitable and extremely cost-effective replacement for non-critical stainless steel piping.

 Sangir is associated with Lubrizol for the manufacturing of Corzan Make Industrial Grade CPVC Pipes and fittings. We are tied up with Kynar for the production of PVDF Pipes and fittings, which are the best cost-effective replacements to non-critical stainless steel piping. These are extremely suitable for Ammonia Lines and other Fertilizer Plant Application.

We provide PVC sheets for Acid-Proof and Chemical-Proof Lining in Acid tanks, chemical spillage-Hazard areas, HDPE non-contamination barriers in contamination zones.

 In existence since 1982, Sangir now exports products to over 35 countries worldwide and enjoys loyalty of over 1500 customers. An 9001:2008 certified company, Sangirprovides internationally accepted and certified products as per ISO, ASTM, DIN, ASNZ, JIS and IS standards. It has product certifications with WRAS, UL, NSF and BIS.   Products are made using extrusion, injection molding, compression molding, roto-molding techniques and a full-fledged fabrication department to cater to customer specific requirements.

More Less

Company data

Number of employees

101 - 500

Area of business

Semi-finished products, technical parts and reinforced plastics