BIEGLO GmbH
Germany
This company is main exhibitor of
Location
Hall map
Fairground map
Contact
John Biesterfeld
Miteya Rahane
Our range of products
Product categories
- 01 Raw materials, auxiliaries
- 01.01 Thermoplastics
- 01.01.056 Polyamideimide
Polyamideimide
- 01 Raw materials, auxiliaries
- 01.01 Thermoplastics
- 01.01.070 Polyetheretherketone (PEEK)
Polyetheretherketone (PEEK)
- 01 Raw materials, auxiliaries
- 01.03 Resins and compounds
- 01.03.039 Polyimide resins
Polyimide resins
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.04 Product groups
- 02.04.001 Semi finished products
- 02.04.001.13 Semi-finished parts/products made from fibre-reinforced plastics
Semi-finished parts/products made from fibre-reinforced plastics
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.04 Product groups
- 02.04.001 Semi finished products
- 02.04.001.14 Semi finished parts/products made from Polyimide
Semi finished parts/products made from Polyimide
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.04 Product groups
- 02.04.001 Semi finished products
- 02.04.001.15 other and machined semi finished products/Pre-cut parts
other and machined semi finished products/Pre-cut parts
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.04 Product groups
- 02.04.002 Films
Films
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.04 Product groups
- 02.04.003 Technical parts
- 02.04.003.03 Parts from high performance thermoplastics
Parts from high performance thermoplastics
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.04 Product groups
- 02.04.004 Compounds/Recyclates
Compounds/Recyclates
Our products
Product category: Compounds/Recyclates
PEEK functional Compounds
PEEK-Compounds can be processed to semi-finished material or injection molded.
BIEGLO offers:
PEEK - PTFE;
PEEK - graphite;
PEEK - carbon fiber;
PEEK - glass fiber;
PEEK - with PTFE and carbon fiber and graphite as well as many other compounding options.
Target Products
Wear resistant
Product category: Compounds/Recyclates
PEEK Color Compounds
- Black
- White
- Red
- Yellow
- Green
- and much more
These can be processed into semi-finished products or injection-molded.
Product category: Semi-finished parts/products made from fibre-reinforced plastics, other and machined semi finished products/Pre-cut parts
PEEK-Rods
Polyetheretherketone (PEEK) is a thermoplastic polymer that is often used instead of metal or other types of plastic. PEEK has a temperature resistance of up to 240 ° C and a special resistance to chemicals. In addition, PEEK is self-lubricating and can be recycled.
PEEK is in particular demand in the aerospace and automotive industries, as parts made of PEEK are very light and at the same time withstand high temperatures. PEEK is used in the medical, oil and gas and food industries because of its resistance to chemicals. PEEK is mainly used as a support ring for seals, in rolling and plain bearings, as valve plates or as matrix material for composites.
In addition to natural PEEK, BIEGLO can also offer PEEK compounds. Reinforced PEEK with carbon or glass fibers as well as with PTFE, but also tribological compounds with a mix of PEEK, PTFE, carbon fibers or graphite belong to the assortment of BIEGLO.
Our PEEK semi-finished products are usually Made-in-Germany. In addition, PEEK can also be recycled. We gladly buy back clean and sorted PEEK waste.
Applications
Automotive,
Industrial,
Functional Parts
Target Products
Rod,
Colored,
Acid resistant,
Alkali resistant
Product category: Semi-finished parts/products made from fibre-reinforced plastics, other and machined semi finished products/Pre-cut parts
PEEK-Sheets
Polyetheretherketone (PEEK) is a thermoplastic polymer that is often used instead of metal or other types of plastic. PEEK has a temperature resistance of up to 240 ° C and a special resistance to chemicals. In addition, PEEK is self-lubricating and can be recycled.
PEEK is in particular demand in the aerospace and automotive industries, as parts made of PEEK are very light and at the same time withstand high temperatures. PEEK is used in the medical, oil and gas and food industries because of its resistance to chemicals. PEEK is mainly used as a support ring for seals, in rolling and plain bearings, as valve plates or as matrix material for composites.
In addition to natural PEEK, BIEGLO can also offer PEEK compounds. Reinforced PEEK with carbon or glass fibers as well as with PTFE, but also tribological compounds with a mix of PEEK, PTFE, carbon fibers or graphite belong to the assortment of BIEGLO.
Our PEEK semi-finished products are usually Made-in-Germany. In addition, PEEK can also be recycled. We gladly buy back clean and sorted PEEK waste.
Applications
Food,
Chemistry,
Automotive,
Industrial,
Medical
Target Products
Film/Sheet,
Acid resistant,
Alkali resistant,
Corrosion resistant
Hot Topics
Circular Economy
Product category: Semi-finished parts/products made from fibre-reinforced plastics, other and machined semi finished products/Pre-cut parts
PEEK-Tubes
Polyetheretherketone (PEEK) is a thermoplastic polymer that is often used instead of metal or other types of plastic. PEEK has a temperature resistance of up to 240 ° C and a special resistance to chemicals. In addition, PEEK is self-lubricating and can be recycled.
PEEK is in particular demand in the aerospace and automotive industries, as parts made of PEEK are very light and at the same time withstand high temperatures. PEEK is used in the medical, oil and gas and food industries because of its resistance to chemicals. PEEK is mainly used as a support ring for seals, in rolling and plain bearings, as valve plates or as matrix material for composites.
In addition to natural PEEK, BIEGLO can also offer PEEK compounds. Reinforced PEEK with carbon or glass fibers as well as with PTFE, but also tribological compounds with a mix of PEEK, PTFE, carbon fibers or graphite belong to the assortment of BIEGLO.
Our PEEK semi-finished products are usually Made-in-Germany. In addition, PEEK can also be recycled. We gladly buy back clean and sorted PEEK waste.
Applications
Food,
Automotive,
Industrial,
Medical
Target Products
Tube/Hose,
Acid resistant,
Alkali resistant
Product category: other and machined semi finished products/Pre-cut parts, Films
PEEK-Film and Foil
Polyetheretherketone (PEEK) is a thermoplastic polymer that is often used as an alternative to metal or other types of plastic. PEEK has a temperature resistance of up to 240 ° C and a special resistance to chemicals. In addition, PEEK is self-lubricating and can be recycled.
PEEK is in particular demand in the aerospace and automotive industries, as parts made of PEEK poseess a high strength-to-weight ratio. PEEK is used in the medical industry because of its excellent biocompatibility. The resistance to chemicals makes PEEK suitable for oil and gas and food industries as well. PEEK is mainly used as a support ring for seals, in rolling and plain bearings, as valve plates or as matrix material for composites.
PEEK films are often used as electrical insulation for cables and wires, but they are also used as membrane or adhesive tape. Furthermore, they are used as coatings for high-temperature applications and can also be found in modern loudspeakers.
Applications
Electric Cable
Target Products
Acid resistant,
Alkali resistant
Product category: other and machined semi finished products/Pre-cut parts
PEEK-Filaments
PEEK filaments can be used very well for 3D printing.
PEEK-Monofilaments
Monofilaments consist of a single solid piece of string. Monofilaments made of Polyetheretherketone are tougher than their multifilament counterpart. They offer more resilience. In general, monofilaments are suitable for applications requiring extremely high mechanical, thermal and chemical properties.
We offer PEEK-Monofilament with a thickness from 0.1 to 2.5 mm.
PEEK-Multifilaments
In many aspects multifilaments are the opposite of monofilaments. They consist of several threads of microfibers that are twisted and connected together. Multifilaments made of Polyetheretherketone have a higher flexibility.
We offer PEEK multifilament from 125 dtex to 1230 dtex.
Target Products
Tearproof,
Acid resistant,
Alkali resistant
Product category: other and machined semi finished products/Pre-cut parts
PEEK-Shrinktubes
Polyetheretherketone (PEEK) is a thermoplastic polymer that is often used instead of metal or other types of plastic. PEEK has a temperature resistance of up to 240 ° C and a special resistance to chemicals. In addition, PEEK is self-lubricating and can be recycled.
PEEK is in particular demand in the aerospace and automotive industries, as parts made of PEEK are very light and at the same time withstand high temperatures. PEEK is used in the medical, oil and gas and food industries because of its resistance to chemicals. PEEK is mainly used as a support ring for seals, in rolling and plain bearings, as valve plates or as matrix material for composites.
In addition to natural PEEK, BIEGLO can also offer PEEK compounds. Reinforced PEEK with carbon or glass fibers as well as with PTFE, but also tribological compounds with a mix of PEEK, PTFE, carbon fibers or graphite belong to the assortment of BIEGLO.
Our PEEK semi-finished products are usually Made-in-Germany. In addition, PEEK can also be recycled. We gladly buy back clean and sorted PEEK waste.
Target Products
Acid resistant,
Alkali resistant
Product category: Compounds/Recyclates
Recycled PEEK
Polyetheretherketone (PEEK) is a thermoplastic polymer that is often used instead of metal or other types of plastic. PEEK has a temperature resistance of up to 240 ° C and a special resistance to chemicals. In addition, PEEK is self-lubricating and can be recycled.
PEEK is in particular demand in the aerospace and automotive industries, as parts made of PEEK are very light and at the same time withstand high temperatures. PEEK is used in the medical, oil and gas and food industries because of its resistance to chemicals. PEEK is mainly used as a support ring for seals, in rolling and plain bearings, as valve plates or as matrix material for composites.
In addition to natural PEEK, BIEGLO can also offer PEEK compounds. Reinforced PEEK with carbon or glass fibers as well as with PTFE, but also tribological compounds with a mix of PEEK, PTFE, carbon fibers or graphite are part of the BIEGLO range.
Applications
Food,
Automotive,
Industrial,
Medical
Target Products
Acid resistant,
Alkali resistant
Product category: Semi-finished parts/products made from fibre-reinforced plastics
Polyimide-Rods
The Meldin®7000 brand offers polyimide rods. Polyimide rods have a length of 38 inch (965.2 mm). They are available with 1/4 inch (6.3 mm) to 3 1/4 inch (82.5 mm) diameters.
Polyimide with 315 ° C has an unusually high temperature resistance and retains its good mechanical properties in extreme environments. In addition, polyimide impresses with low wear and a long service life. In particular, the dimensional stability at very high temperatures is remarkable.
The range also includes polyimide with various additives such as PTFE and graphite.
Target Products
Film/Sheet,
Rod
Product category: Semi-finished parts/products made from fibre-reinforced plastics
Polyimide-Sheets
Polyimide with 315 ° C has an unusually high temperature resistance and retains its good mechanical properties in such environments. In addition, polyimide impresses with low wear and a long service life. In particular, the dimensional stability at very high temperatures is remarkable.
The range also includes polyimide with various additives such as PTFE and graphite.
Target Products
Film/Sheet,
Rod
Product category: Parts from high performance thermoplastics
Polyimide Finished Parts
Polyimide has extremely high temperature resistance (315 ° C) while retaining its good mechanical properties in such an extreme environments. In addition, polyimide impresses with low wear and a long service life. In particular, the dimensional stability at very high temperatures is remarkable.
BIEGLO can organize standard parts as well as products according to customer's drawings and specifications. BIEGLO offers its support and experience to find the most suitable process for your finished parts. Through a global network of polyimide processors, BIEGLO can procure the best finished polyimide parts at competitive prices.
Target Products
Wear resistant
Product category: Polyamideimide, Semi-finished parts/products made from fibre-reinforced plastics, other and machined semi finished products/Pre-cut parts
PAI-Sheets
The unique performance of polyamideimide (PAI) is the result of converting a thermoplastic into a cross-linked thermoset during a longer curing process. This then has a long-term service temperature of 260 ° C and can also be far into the kyogene range resistant. Torlon is characterized by high impact resistance, exceptional mechanical strength and very good retention of these properties at high temperatures.
PAI products are suitable for many applications such as gears, rollers, plasma chamber hardware, and contact holders. In addition, Torlon can be processed into chip holders and sockets, sliding strips in aerospace, insulation bodies in electrical engineering, slide bushings in hydraulic systems, and sipes in compressors.
Applications
E & E
Target Products
Film/Sheet,
Transparent,
Acid resistant,
Alkali resistant
Product category: Polyamideimide, Semi-finished parts/products made from fibre-reinforced plastics, other and machined semi finished products/Pre-cut parts
PAI-Rods
The unique performance of polyamideimide (PAI) is the result of converting a thermoplastic into a cross-linked thermoset during a longer curing process. This then has a long-term service temperature of 260 ° C and can also be far into the kyogene range resistant. Torlon is characterized by high impact resistance, exceptional mechanical strength and very good retention of these properties at high temperatures.
PAI products are suitable for many applications such as gears, rollers, plasma chamber hardware, and contact holders. In addition, Torlon can be processed into chip holders and sockets, sliding strips in aerospace, insulation bodies in electrical engineering, slide bushings in hydraulic systems, and sipes in compressors.
Applications
Industrial
Target Products
Rod
Product category: Polyamideimide, Semi-finished parts/products made from fibre-reinforced plastics, other and machined semi finished products/Pre-cut parts
PAI-Tubes
The unique performance of polyamideimide (PAI) is the result of converting a thermoplastic into a cross-linked thermoset during a longer curing process. This then has a long-term service temperature of 260 ° C and can also be far into the kyogene range resistant. Torlon is characterized by high impact resistance, exceptional mechanical strength and very good retention of these properties at high temperatures.
PAI products are suitable for many applications such as gears, rollers, plasma chamber hardware, and contact holders. In addition, Torlon can be processed into chip holders and sockets, sliding strips in aerospace, insulation bodies in electrical engineering, slide bushings in hydraulic systems, and sipes in compressors.
Applications
Functional Parts
Target Products
Tube/Hose
Product category: Compounds/Recyclates
PEI Color Compounds
- Black
- White
- Red
- Yellow
- Green
- and much more
These can be processed into semi-finished products or injection molded.
Polyetherimide is a high strength amorphous thermoplastic polymer that is part of the polyimide family. PEI stands out in particular because of its low flammability (UL94: V-0) and shows at the same time a low smoke development. PEI has a continuous service temperature of up to 170 ° C.
Due to its first-class electrical insulation values, which are stable over a wide temperature and frequency range, this material is particularly suitable for use in the electronics industry. PEI components are also resistant to many chemicals and to hydrolysis. However, this also depends on the state of tension.
Product category: other and machined semi finished products/Pre-cut parts
PEI-Sheets
Polyetherimide is a high strength amorphous thermoplastic polymer that is part of the polyimide family. PEI stands out in particular because of its low flammability (UL94: V-0) and shows at the same time a low smoke development. PEI has a continuous service temperature of up to 170 ° C.
Due to its first-class electrical insulation values, which are stable over a wide temperature and frequency range, this material is particularly suitable for use in the electronics industry. PEI components are also resistant to many chemicals and to hydrolysis. However, this also depends on the state of tension.
Applications
E & E
Target Products
Film/Sheet,
Transparent,
Acid resistant,
Alkali resistant
Product category: other and machined semi finished products/Pre-cut parts
PEI-Rods
Polyetherimide is a high strength amorphous thermoplastic polymer that is part of the polyimide family. PEI stands out in particular because of its high flammability (UL94: V-0) and shows at the same time a low smoke development. PEI has a continuous service temperature of up to 170 ° C.
Due to its first-class electrical insulation values, which are stable over a wide temperature and frequency range, this material is particularly suitable for use in the electronics industry. PEI components are also resistant to many chemicals and to hydrolysis. However, this also depends on the state of tension.
Target Products
Rod
Product category: other and machined semi finished products/Pre-cut parts, Parts from high performance thermoplastics
PEEK Finished Parts
PEEK can be used as a replacement for metal components. They are very well suited to reduce weight and are often applied in lightweight construction. Frequently PEEK finished parts show better properties than metal parts.
We can organize standard parts, but also products according to customer's drawings and specifications. BIEGLO supports you in finding the best suited process for your finished parts. We use a global network of PEEK-converters to source the best in class finished PEEK Parts at competitive prices.
Applications
Industrial
Target Products
Complex Geometry,
Solid
Product category: other and machined semi finished products/Pre-cut parts, Parts from high performance thermoplastics
PEEK-Bearings
As a metal substitute PEEK is particularly suitable for lightweight. A bearing made of PEEK weighs much less than one made of metal. At very high stress, sliding speeds and / or temperatures, PEEK can also be modified with carbon or glass fibers. To improve the sliding properties of bearings, a PEEK-PTFE compound is suitable.
Slide bearings made of PEEK are used in modern mechanical engineering, in construction machines, in medical technology, in conveyor technology and in water turbines. PEEK bearings are also used in pumps, compressors or in offshore installations.
Applications
Industrial,
Medical
Target Products
Acid resistant,
Alkali resistant
Product category: other and machined semi finished products/Pre-cut parts, Parts from high performance thermoplastics
PEEK-Gears
Polyetheretherketone (PEEK) is often used for gears that are subjected to high stress. PEEK in itself has very good tribological properties, a high temperature resistance and an exceptional chemical resistance. In general, longer life and reduced maintenance intensity can be observed with PEEK gears. In addition, the self-lubricating property of PEEK makes the use of oil superfluous.
PEEK gears can replace conventional metal gears. Especially in agricultural equipment, vehicles and aircraft, the weight-reducing effect is paramount. But PEEK gears can also be used in machinery used in medical, the food and the electrical industry.
Applications
Food,
Automotive,
E & E,
Industrial,
Medical
Target Products
Complex Geometry,
Colored,
Acid resistant,
Alkali resistant
Product category: other and machined semi finished products/Pre-cut parts, Parts from high performance thermoplastics
PEEK Dental Discs
Polyetheretherketone is characterized by a very good biocompatibility for use in dentistry, making it very suitable as an implant. Furthermore, the modulus of elasticity is very similar to that of the human skeleton and it is radiolucent. The low hardness makes injury to the original teeth very unlikely and patients with metal allergies can be treated without any problems. In addition, implants made of PEEK have a low density and are easy to clean.
This product is not yet CE 0482 certified. The certification is in progress.
Applications
Implants
Target Products
Complex Geometry,
Colored,
Flexible/Elastic
Product category: other and machined semi finished products/Pre-cut parts, Parts from high performance thermoplastics
PEEK-Coatings
Coatings made of PEEK are particularly suitable for aggressive environments. They are characterized by a high mechanical strength and are resistant to chemicals even at high temperatures. In addition, PEEK shows excellent tribological properties, which can improve the wear on the coated part.
Coatings made of PEEK are used for components in analysis technology, semiconductor and medical technology. Even components in the oil & gas industry or components that require the highest levels of purity can be coated with PEEK. CoPEEK is also certified to EU 10/2011 and FDA and can be used in the food industry.
Applications
Food,
Industrial,
Medical
Product category: Semi-finished parts/products made from fibre-reinforced plastics, other and machined semi finished products/Pre-cut parts, Parts from high performance thermoplastics
PEEK Compressor Valve Plates
Polyetheretherketone (PEEK) has proven to be the best material for compressor valve plates. The tensile strength is one of the best in the polymer field. In some compounds, it even reaches metal-like heights. The crystalline structure ensures dimensional stability even years after commissioning.
Valve plates made of PEEK or PEEK compounds are valued especially in the oil & gas industry, as compressors have to operate in extreme environments. Downtime and costs can be effectively reduced.
Applications
Industrial
Target Products
Film/Sheet
Product category: other and machined semi finished products/Pre-cut parts, Parts from high performance thermoplastics
PEEK CNC-Parts
The advantage over the injection molding of PEEK finished parts are the better mechanical properties. In addition, no expensive tool costs are added to the price calculation. We are happy to provide you with semi-finished products made of our CoPEEK to produce PEEK CNC-Parts.
End products may include bushings, seals, plain bearings, O-rings or machine components.
Polyetheretherketone (PEEK) is often used for CNC-Parts that are subjected to high stress. PEEK in itself has very good tribological properties, a high temperature resistance and an exceptional chemical resistance. In general, longer life and reduced maintenance intensity can be observed with PEEK CNC-Parts. In addition, the self-lubricating property of PEEK makes the use of oil superfluous.
Applications
Industrial
Target Products
Complex Geometry
Product category: other and machined semi finished products/Pre-cut parts, Parts from high performance thermoplastics
PEEK-Seals
Polyetheretherketone (PEEK) is often used for seals that are subjected to high stress. PEEK in itself has very good tribological properties, a high temperature resistance and an exceptional chemical resistance. In general, longer life and reduced maintenance intensity can be observed with PEEK-Seals. In addition, the self-lubricating property of PEEK makes the use of oil superfluous.
Advantages over PTFE:
- Maximum continuous service temperature of PEEK is 250 ° C (for PTFE 180 ° C)
- Improved wear
- Higher mechanical strength
- Higher hardness
- Better rigidity
- Can be injection molded
PEEK sealing rings are used in the oil & gas, medical, and chemical industries.
Applications
Industrial,
Medical
Target Products
Complex Geometry,
Solid,
Wear resistant
Company news
Date
Topic
Download
Aug 16, 2019
Thermoplastic and Thermosetting Polyimdes - BIEGLO expands at the top of the polymer-pyramid
Furthermore, BIEGLO now offers Polyamide-imide powder (PAI) to complete the portfolio of extremely high temperature-resistant and melt-processable products. PAI has to be annealed extensively to develop full mechanical potential.
BIEGLO fills the gap between the low-Tg PEEK (143°C) and the very costly PI-s that is available mainly as semi-finished ‘shape’ (rods, sheets and tubes). When the low Tg of PEEK is problematic but melt-processing should be applied, the TPIs have considerable advantages: ‘low cost’ for mass production and superior temperature performance compared to PEEK. Next to PEEK, Meldin® and Aurum® BIEGLO offers a range of raw-materials for the HPP-compounders.
Typical applications for TPI are high-performance washers, ball-bearing cages, dry bearings, seals and gears - where excellent mechanical & tribological properties as well as temperature resistance are paramount. Used in aviation, automotive and other industries, TPIs can be compounded and converted like other HPP-thermoplastics.
The growing demand for HPPs lead BIEGLO to focus entirely on the high-temperature segment. Sourcing from a global network of suppliers BIEGLO has been growing with CoPEEK from Panjin Zhongrun, PRC and the PI-shapes of the Meldin® 7000-Series from Saint-Gobain, USA. BIEGLO operates specialized web-shops www.PEEK-shop.de and www.POLYIMDE-shop.de to offer some of the standard HPP-products.
Jun 15, 2019
High-Performance Polymers in the Production of Food
The self-lubricating PEEK can also be used to produce bearings, assembly lines, gears and bushings. Moreover, through coatings the friction and wear can be notably reduced. Through specific compounding from PEEK, the efficiency and quality of final products can be increased. To improve food security, colour compounds can be equipped with metal-detectable additives.
Noteworthy is also that, along with PEEK, BIEGLO can also offer PPSU. This material is translucent and is used for baby bottles, kitchen containers or similar. It has a continuous working temperature of 160°C and is easy to sterilize.
The ASP-Plastics GmbH (a subsidiary of BIEGLO) offers semi-finished goods made of technical polymers, such as PET, POM, or UHMW-PE. Additionally here, food certificates, colors, and metal-detectability can be supplied.
BIEGLO exhibits in October at the K-Fair in Dusseldorf.
May 15, 2019
Sustainable with recycled PEEK
PEEK-waste can be melted again and put into a new form. Processing waste, such as shavings or sprues do not need to be thrown away. They can be recycled according to quality requirements. Also compounds made of PEEK with glass- or carbon fibre can be recycled.
BIEGLO integrated sustainability in form of a subdivision into the company. PEEK is a valuable resource, whose lifecycle can be prolonged. Recycled PEEK can be considered for price sensitive projects or used instead other materials. PEEK-waste are bought back from BIEGLO-clients, as long as it is clean, dry and of one brand. These might be shavings, sprues, cuttings, etc. Thus BIEGLO was able to develop a whole cycle from granules over shapes to recycled PEEK for this material.
Meanwhile BIEGLO added with Polyetherimid (PEI) another thermoplast to their portfolio. There also is a market for PEI-waste. BIEGLO intends to expand the subdivision Sustainability. Therefore, BIEGLO is very interested in other recyclable polymers such as, PPS, PES, and PA12.
Apr 16, 2019
PEEK from a Save Harbour
BIEGLO's clear concept contributes to the growing success:
· reliability of supply
· stability of price
· constantly improved quality of products and services.
As most likely Europe's largest PEEK-distributor, BIEGLO continuously expands the portfolio of high-performance polymers. There is a wide range of functional and PEEK color compounds. Last but not least BIEGLO offers PEEK semi-finished products.
The management of BIEGLO GmbH commented "In times when people in the Anglo-Saxon area sail into the storm of planning-uncertainty, the business with Asian partners is gaining momentum through tailwind." They expect sales to boost again in 2019.
The BIEGLO GmbH is a distribution company for high-performance polymers from Hamburg. They built up several online shops, e.g. PEEK-Shop.de, Polyimid-shop.de, PAI-Shop.de, und PEI-Shop.de successfully.
About us
Company details
Internationality is important to BIEGLO. We find many customers abroad and rely on an international network of suppliers. The web shops PEEK-shop.de, PI-shop.de, PAI-shop.de and PEI-shop.de assist us to market our core-portfolio.
We see our advantage as a distribution company in fast delivery times, a large network of high-performance polymer processors, and expert knowledge of in the field of plastics.
Company data
Number of employees11 - 30
Foundation2011
Area of business- Raw materials, auxiliaries
- Semi-finished products, technical parts and reinforced plastics
- Plastic product manufacturing
- Machinery construction
- Vehicle construction / aerospace
- Electronics / electro technology
- Medical technology / precision engineering / optics