Tai Shin Plastic Machinery Co., Ltd.

Ideal for high-speed production, on-line system
Reels adjustable in diameter and width
Binding of coil by means of a thermo-welding PP straps
Coils are guaranteed of a constant precise length

New blowing system and accurate pressure control
the internal blowing system is including a digital micro-pressure control system. Meanwhile, the outside sizing way or the requirement for air pre-filling could be achieved by this system.
Master adjuster for speed
the speeds for extruders, haul-offs and a yarn braider can be synchronized by a Master adjuster
On-line hose sealing system
the advantage of this system is to seal the hose-end in pre-set length and prevent air leaking and human mistakes
New joint for the CROSS HEAD
one “L” shape of joint connecting with the extruder will change the traditional lay-out and save much floor space. The inside of joint is coated with a special lubricating layer. PVC material will not remain and burn down.

For garden hoses, it provides a clean and simple way to remove from hoses. Separation rate over 99%, capacity TR-100: 100-120 KG/HR；TR-300: 300-500 KG/HR
After recycling, scraps can be used in the production line directly.
You don’t need a pelletizer.
If you are the hose manufacturer, it is highly recommended.
This machine will save you time, labor costs, energy etc.

Production line for single-wall corrugated pipes.
High speed corrugator Max. 30m/min
Easily change mold blocks, friendly for operators
Most efficient way of production, every single mold block is 100% utilized
Suitable for making CD pipes, shisha pipes, electrical conduit