Manage stand orders

Polypres Mediterraneo, S.L.

Pol. Ind. Oeste C/ Plantanova, 16, 46893 Alfarrasí (Valencia)
Spain

Telephone +34 96 2298509
Fax +34 96 2297708
polypres@polypres.com
http://www.polypres.com

Trade fair planning

Remove from MyOrganizer Add to MyOrganizer

Location

Hall 8a / E12-01

Hall map

K 2019 hall map (Hall 8a): stand E12-01

Fairground map

K 2019 fairground map: Hall 8a

Our range of products

Product categories

02 Semi-finished products, technical parts and reinforced plastics
02.04 Product groups
02.04.001 Semi finished products
02.04.001.03 Semi finished products of polyamide (PA)

Semi finished products of polyamide (PA)

02 Semi-finished products, technical parts and reinforced plastics
02.04 Product groups
02.04.001 Semi finished products
02.04.001.04 Semi finished products of polycarbonate (PC)

Semi finished products of polycarbonate (PC)

02 Semi-finished products, technical parts and reinforced plastics
02.04 Product groups
02.04.001 Semi finished products
02.04.001.05 Semi finished products of polyethylene (PE)

Semi finished products of polyethylene (PE)

02 Semi-finished products, technical parts and reinforced plastics
02.04 Product groups
02.04.001 Semi finished products
02.04.001.06 Semi finished products of polymethylmethacrylate (PMMA)

Semi finished products of polymethylmethacrylate (PMMA)

02 Semi-finished products, technical parts and reinforced plastics
02.04 Product groups
02.04.001 Semi finished products
02.04.001.07 Semi finished products of polypropylene (PP)

Semi finished products of polypropylene (PP)

02 Semi-finished products, technical parts and reinforced plastics
02.04 Product groups
02.04.001 Semi finished products
02.04.001.09 Semi finished products of polytetrafluorethylene (PTFE)

Semi finished products of polytetrafluorethylene (PTFE)

02 Semi-finished products, technical parts and reinforced plastics
02.04 Product groups
02.04.001 Semi finished products
02.04.001.11 Semi finished products of polyvinylchloride (PVC)

Semi finished products of polyvinylchloride (PVC)

Our products

Product category: Semi finished products of polyethylene (PE)

POLYTEC 500 HMW

High density and high molecular weight sinterpressed polyethylene.
It is primarily aimed for the chemical, mechanical and food industry.
The main characteristics of this product are:
- Stiffness
- Mechanical damping capacity.
- Good mechanical resistance.
- Good impact resistance.
- Good resistance to chemicals.
- Good resistance to abrasion.
- Resistance to very low temperatures.
- Very low absorption of moisture.
- Good sliding capacities.
- Weld ability.
- No electrical conductivity.
- Recyclable 100%.

* For less rigorous wear applications, it is an economical alternative to the POLYTEC 1000 UHMW.

Applications
Functional Parts

Target Products
Film/Sheet, High Strength, Acid resistant, Alkali resistant, Wear resistant

Product category: Semi finished products of polyethylene (PE)

POLYTEC 500 HMW UV

POLYTEC 500 HMW UV is a high density, high molecular weight pressed polyethylene with low moisture absorption.
This material incorporates, in addition to the characteristics of our POLYTEC 500 HMW, a series of additives that provide a great absorption of ultraviolet light, in addition to antioxidants that protect against thermal degradation. It also has excellent crack resistance in the active environment (ESCR).
It is an optimal product for use, for example, in street furniture, playgrounds, outdoor decoration, facades, etc.

Applications
Exterior

Target Products
Film/Sheet, Colored, High Strength, Acid resistant, Alkali resistant, Wear resistant

Product category: Semi finished products of polyethylene (PE)

POLYTEC 500 HMW AT

POLYTEC 500 HMW AT (antistatic) is a pressed high density, high molecular weight polyethylene used to obtain anti-static behavior.
Stiffness, resistant to environmental and chemical tensile, mechanical damping capacity with abrasion resistance and low moisture absorption are the outstanding characteristics of this product, which can also be welded. It is a perfect substitute for non-ferrous metals such as copper, brass, bronze, aluminum.
In addition, it is an economical alternative to the POLYTEC 1000 UHMW AT. POLYTEC 500 HMW AT is suitable for the chemical, mechanical and food industry.

Applications
Functional Parts

Target Products
Film/Sheet, High Strength, Acid resistant, Alkali resistant, Wear resistant

Product category: Semi finished products of polyethylene (PE)

POLYTEC 1000 UHMW

Sinterpressed polyethylene of high density and ultra high molecular weight.
Directed mainly to applications with great mechanical, chemical and thermal requirements.
The main characteristics of this product are:

- Rigidity.
- Mechanical damping capacity.
- Minimum coefficient of friction.
- Excellent mechanical resistance.
- Excellent impact resistance.
- Good resistance to chemicals.
- Excellent resistance to abrasion.
- Resistance to very low temperatures.
- Very low absorption of moisture.
- Good sliding capacities.
- No electrical conductivity.
- Recyclable 100%.

Applications
Functional Parts

Target Products
Film/Sheet, High Strength, Acid resistant, Alkali resistant, Wear resistant

Product category: Semi finished products of polyethylene (PE)

POLYTEC 1000 UHMW AT

POLYTEC 1000 UHMW AT is pressed polyethylene of ultra high molecular weight (PE-UHMW) with an antistatic additive, provides electrostatic dissipative qualities that often require components that operate on lines (bottling plants, petrochemicals, refineries, etc.) without changing the base product (POLYTEC 1000 UHMW).

Applications
Functional Parts

Target Products
Film/Sheet, High Strength, Acid resistant, Alkali resistant, Wear resistant

Product category: Semi finished products of polyethylene (PE)

POLYFLON

POLYFLON is pressed polyethylene with an ultra high molecular weight (PE-UHMW) for use in applications requiring temperature conditions above 120 ° C. The used additives give a slow degradation of the material and an extension of the useful life of the product under extreme temperature conditions. In addition, its excellent dimensional stability is a very useful contribution when machining parts that require high precision.
Especially suitable for the food industry and canning industry.

Applications
Functional Parts

Target Products
Film/Sheet, High Strength, Wear resistant

Product category: Semi finished products of polyethylene (PE)

POLYGLASS

POLYGLASS is an ultra-high molecular weight polyethylene (PE-UHMW), made with glass microspheres, developed specifically for contact areas with very high abrasion and wear. In addition, its excellent dimensional stability is very useful when machining parts that require great precision.
This product is especially intended for the paper and ceramic industry.

Applications
Functional Parts

Target Products
Film/Sheet, High Strength, Acid resistant, Alkali resistant, Wear resistant

Product category: Semi finished products of polyethylene (PE)

POLYMoS2

POLYMoS2 is an ultra high molecular weight (PE-UHMW) pressed polyethylene with Molybdenum Bisulfide (MoS2) which offers a very good coefficient of friction and remarkably improves abrasion resistance, giving it a very good sliding capacity.
This product is specially designed for sliding ramp applications for the Aero/Port industry.

Target Products
Film/Sheet, High Strength, Acid resistant, Alkali resistant, Wear resistant

Product category: Semi finished products of polyethylene (PE)

POLYMAR

Our POLYMAR is a high density and high molecular weight pressed polyethylene which, due to its excellent behavior whilst in contact with food, has been conceived for developments in the meat, catering and food industry in general in applications such as:
- Cutting boards for the household
- Cutting blocks/tables for the meat processing industry: cutting rooms, butchers, fishmongers, supermarkets, large surfaces etc.
- Instruments and accessories for industrial kitchens.
- Doors and protection panels for cold chambers.
- Trays for canning.
- Industrial impact protection and Industrial protections panels.
It is a product that has an excellent resistance to impact and also, due to its extremely low moisture absorption coefficient, its resistance to chemical agents and its good behavior to changes in temperature, makes cleaning very easy even in a dishwasher.
It is approved by the health authority (D.G.S.) for food use (RD 319/1984). It meets all the regulations adopted for plastic materials with food contact, including the FDA (Food and Drug Administration) for contact with foods, described in the CFR (Code of Federal Regulations) Title 21, section 177.1520 (c) and the requirements defined by the directives of the EEC (European Community) on plastic materials for contact with food, Directive 2002/72 / EC of 6th August 2002 and its updates.
POLYMAR is a high density polyethylene with high molecular weight.

We also have all the certifications currently required:
• Our number assigned by the Spanish Agency for Food Safety and Nutrition in the General Sanitary Registry for Food and Food Companies, pursuant to Royal Decree 191/2011 of the Ministry of Health, Social Policy and Equality, is the RGSEAA 39.005215 / V
• Global migration test according to UNE-EN 1186, granted by AIMPLAS (Instituto Tecnológico del Plástico): REPORT AT.0764 / 13

Applications
Functional Parts

Target Products
Film/Sheet, High Strength, Acid resistant, Alkali resistant, Wear resistant

About us

Company details

Polypres Mediterranean SL, is a company specialized in technical plastics processing company. Our product, pressed sheets of polyethylene and polypropylene, is intended for different markets with three main brands:

The evolution of engineering plastics and new discoveries for application, allow us to use them in the most diverse work situations. Always conscious in protecting the environment.

"Development and innovation of new products to solve the constant requirements in different areas of the industry"