Continator Plastic Machinery ApS

Lejbøllevej 13, 5953 Tranekær
Denmark

Hall map

K 2019 hall map (Hall 11): stand E11

Fairground map

K 2019 fairground map: Hall 11

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.003  Size reduction equipment (crushers, shredders, grinders)

Size reduction equipment (crushers, shredders, grinders)

Our products

Product category: Size reduction equipment (crushers, shredders, grinders)

GRANULATOR MGK 2121R-2​

MGK 2121R-2 by Continator is a newly-designed grinding machine intended for setup in connection with injection moulding machines. The special construction makes it occupy very little floor space.

The hopper´s large feed opening ensures that the sprues, that are automatically cut off, easily fall into the granulator. The stainless steel hopper is eqipped with sound damping. The shape of the hopper makes it very suitable for placing directly by the injection moulding machine. the slow running rotor of the granulator with the directly mounted flywheel ensures a very large capacity with power enough to grind sprues, as well as moulded parts are easily grinded. The special design ensures a very regular grinded material, almost free of dust particles.

The knives are made of high alloy steel and have a large scissor cutting edge when in operation. Easy cleanings obtained by tilting the granulator downwards 90˚ and hereafter easily removingscreenholder and screen. The hopper is mounted with quick-release clips. The standard type of this granulator comes with a built-in rotary level control in the catch box and an hour counter on the control panel. Specially designed hoppers, compressed air conveying systems and PR screen systems are optional.

Hopper opening: 470x280 mm.
Smallest passage in hopper: 190x210 mm.
Motor: 2.2 kW - 950 rpm.
Rotorspeed: 180 rpm.
Voltage: 3x400 Volt, 50 Hz.
Catch box: 11 litre contents with 38 mm suction inlet.
Hour counter: Mounted on control panel.
Level control: Rotating and mounted in the catch box.
Rotating knives: 3 pcs high alloy steel.
Fixed knives: 2 pcs high alloy steel.
Screen hole diameter: 4.0 mm - Alt. 3.0 - 3.5 - 4.5 - 5.0 - 5.5 - 6.0 - 8.0.
Start equipment: direct on line.
Safetyswitch: Mechanical type with key.
Level control, rotary: Mounted in the catchbox.
Flywheel weight: 48 kgs.
Capacity max: 45 kgs/hour.
Net weight: 235 kgs.
Gross weight: 260 kgs.
El.control: Complete with safety switch for material catchbox and thermo-overload protection circuit.
Optionals: Built-in compressed air conveying system, tooth belt operation, PR screensystem.

The knives are made of high alloy steel and have a large scissor cutting edge when in operation.

More Less

Product category: Size reduction equipment (crushers, shredders, grinders)

GRANULATOR TIGER T255​

Tiger T255 is a grinding machine intended for setup in connection with injection moulding machines. The special construction makes it occupy very little floor space. The hopper´s large feed opening ensures that the sprues easily fall into the granulator. The stainless steel hopper is equipped with sound damping material. The shape of the hopper makes it very suitable for placing it right next to the injection moulding machine. The granulator´s tooth cutters are especially suitable for grinding hard plastic material or composite.

Outer dimensions: L 513 mm, W 495 mm - with the wheels swung out W 600 mm. Height without hopper 575 mm. total height with standard hopper 1420 mm.
Weight: Net 247 kg.
Throughput: Approx. 10 kg/h by standard rotor speed 28 r.p.m. the capacity is however depending on type of material.
Base: Mounted with 4 pivotal wheels with brake.
Auger house, rotor: Mounted with 3 pcs tooth cutters, 2 pcs claws and 6 pcs fixed knives. Rotor speed 28 r.p.m.
Auger house, opening: 255x255 mm (10x10 inch). Auger house and gear is 90˚ pivotal in the pass, with removed catch box - for easy cleaning.
Hopper: Hinged, made in stainless steel with 2 windows 150x380 mm, 1 chikane and curtain. (Smallest passage 252 mm). Top inlet hopper 375x375 mm with an opening of 252x252. Height from floor to top of hopper 1420 mm.
Gear: Lenze toothed gear - built together with the motor.
Motor size: 1.5 kW - 1450 r.p.m. with built-in thermostat (120˚C).
Power transfer: Drive pinion and chain wheel with Duplex chain of the maintenance free type.
Safety switch: 2 pcs - for the catch box and covering plate.
Level control: Capacitive, mounted in the top of the catch box, ø18 mm with plug.
Catch box: with 360˚ pivotal suction piece, ø38 mm. Containers 4 litres.
Connecting cable: 3.5 metre with plug.
Operation voltage: 3x400/0.
Control voltage: 230 volt.
Plug outlet: On cutting chamber for the level control in the catch box.
Plug outlet: On control panel for the alarm lamp.
Paint: RAL 5010, blue.

Ease cleaning is obtained by tilting the granulator downwards 90˚.
Specially designed hoppers, tooth cutters and special paint are optional.

More Less

Product category: Size reduction equipment (crushers, shredders, grinders)

GRANULATOR C4-A​

MGK-C4 is a new type of granulator which is very powerful constructed, intended for grinding of sprues directly in connection with an injection moulding machine. This granulator is delivered in an A-version with a screwfeeding unit, and in a H-version mounted with a hopper. If it is wished these units can be interchanged by different jobs.

MGK-C4 is mounted with a slowrunning staggered rotor with cassette knives, mounted in scissor cut action. Hereby is ensured a reground material in a very high quality with a minimum of dust content. The large torque of the rotor is ensured by mounting of a solid flywheel, driven by a powerful toothbeltoperation, whereby interruptions are avoid.

This new granulator has a very high output with surprisingly small external measures, as it only occupies a floor space of 600x466 mm. The large robust wheels does that the granulator easily can be moved. The staggered rotor with knives mounted in scissor cut action together with the solig auger house ensures a very low noise level. Whether the granulator is mounted with a hopper or a screw feeding unit, even larger moulded parts can be grinded in the large auger house, with an opening of 250x185 mm. (Alt. 400x200 mm).

The highquality knives in HSS mounted, are intended as disposable but with a very long lifetime. New knives are mounted without any adjustment needed. MGK-C4 is cleaned within very short time, without use of any tools. The catchbox is retained by means of gassprings which secure a very simple handling.

Auger feed-opening: 280x200 mm
Auger length: 625 mm
Auger, internal diameter: 180 mm
Cutterhouse opening: 250x185 mm
Feed screw r.p.m.: 30
Feed screw motor: 1,1 kW
Speed of rotor: 150 r.p.m. (Alt. 163, 223, 249)
Main motor: 2,2 kW - 950 r.p.m.
Flywheel weight: 28 kgs
Screen size: 4,5 mm (Alt. 3,0 - 3,5 - 4,0 - 5,0 - 5,5 - 6,0 - 8,0)
Rotary knives HSS: 12 pcs
Fixed knives HSS: 2 pcs
Start equipment: Direct on line
Safetyswitch: Mechanical type with key
Level control: Rotary
Capacity max.: 50 kgs/hr
El.voltage: 400 V, 50 Hz, 3-phase + 0 and earth (415/220)
Catchbox content: 10 litre
Suction probe: 38 mm
Weight: Net 325 kgs. Gross 355 kgs

El.control: equipped with controllamps for all functions, outlet for additional safetyswitch on screwfeeding section.
Optionals: Various hoppers, hour counter, built-in compressed air conveying system, PR screensystem.

More Less

About us

Company details

YOUR SPECIALIST IN DOSING UNITS, GRANULATORS, HOPPER LOADERS, DRYERS FOR THE PLASTIC INDUSTRY.

More Less