JUMO GmbH & Co. KG of Fulda at K 2019 in Düsseldorf -- K Trade Fair
Manage stand orders
Select Option
Premium Exhibitor

JUMO GmbH & Co. KG

Moritz-Juchheim-Str. 1, 36039 Fulda
Germany
Telephone +49 661 6003-0
Fax +49 661 6003-500
mail@jumo.net

Hall map

K 2019 hall map (Hall 10): stand H34

Fairground map

K 2019 fairground map: Hall 10

Contact

Sabine Häcker

Head of Trade Fair, Training and Event Management

Phone
+49 661 6003-2865

Email
sabine.haecker@jumo.net

Our range of products

Product categories

  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.01  Processing technologies
  • 02.01.010  Parts made by injection moulding
  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.002  Plastics products and parts for automotive

Plastics products and parts for automotive

  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.005  Plastics products and parts for household/consumer

Plastics products and parts for household/consumer

  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.006  Plastics products and parts for electro-/household appliance

Plastics products and parts for electro-/household appliance

  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.007  Plastics products and parts for electrical engineering

Plastics products and parts for electrical engineering

  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.010  Plastics products and parts for aviation

Plastics products and parts for aviation

  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.011  Plastics products and parts for mechanical engineering

Plastics products and parts for mechanical engineering

  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.03  Supplying
  • 02.03.013  Plastics products and parts for furniture appliances

Plastics products and parts for furniture appliances

  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.003  Technical parts
  • 02.04.003.03  Parts from high performance thermoplastics

Parts from high performance thermoplastics

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.06  Moulds and dies
  • 03.06.001  Injection and compression moulds

Injection and compression moulds

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.06  Moulds and dies
  • 03.06.005  Hotrunner systems

Hotrunner systems

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Process automation
  • 03.07.001  Control equipment
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Process automation
  • 03.07.003  Closed loop control equipment for pressure

Closed loop control equipment for pressure

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Process automation
  • 03.07.004  Closed loop control equipment for temperature

Closed loop control equipment for temperature

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Ancillary equipment
  • 03.09.002  Heating and cooling technology
  • 03.09.002.01  Heating and cooling units

Heating and cooling units

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.003  Measuring equipment for melt tempeature

Measuring equipment for melt tempeature

Our products

Product category: Parts made by injection moulding, Plastics products and parts for automotive, Plastics products and parts for household/consumer, Plastics products and parts for electro-/household appliance, Plastics products and parts for electrical engineering, Plastics products and parts for aviation, Plastics products and parts for mechanical engineering, Plastics products and parts for furniture appliances

JUMO plastoSENS T: Plastic Sensor Technology Is on the Move

In the fall of 2017, JUMO presented plastoSENS technology, an innovative and globally unique process for the production of temperature measurement technology from highperformance plastics. Since then the first individual customer projects have been implemented.

JUMO plastoSENS T temperature probes are voltage and vibration resistant as well as absolutely waterproof. Furthermore, they are characterized by their absolute design freedom and adapt to the respective installation situation. In addition to 4 standard products for different application areas, various special versions are now also available. These JUMO plastoSENS products were developed in close collaboration with customers.

Special production for motor windings
Sensors that are installed in insulating hoses have been usually used up to now for temperature measurement in motor windings. This often resulted in a lack of tightness and the sensor was at risk of breaking. Another problem was the comparatively low dielectric strength. In collaboration with various well-known manufacturers, a JUMO plastoSENS T probe that does not have all these disadvantages was therefore developed. The probe can be used in temperature ranges between -40 and +200 °C, can easily be glued into the motor winding, and has a pulse voltage resistance of up to 8 kV. In addition, the probe makes an impression with a shock resistance of more than 100 g and can be used as a standardcompliant measuring probe according to DIN EN 61800-5-1:11-2017.

Temperature measurement in premium washing and drying machines
JUMO has developed 2 JUMO plastoSENS T products for temperature monitoring in washing and drying machines in a professional environment. To measure the surface temperature a probe that can be automatically loaded in the customer's production facility and that is optimized for robot handling was designed. A material mix of a heat conducting and a non heat conducting plastic, which are absolutely firmly connected together, is used here.

To measure the dryer temperature a cost-effective and installationfriendly probe with 2 sensors was developed. It has a particularly good thermal conductivity and therefore responds extremely quickly. The sensors used in this probe are 2 NTC glass diodes of the DO-35 design type which can be used just like platinum thinfilm sensors and other variants in the JUMO injection molding process.

DFM – digital free-form multisensor technology
This project allows JUMO to look to the future of plastic sensor technology. The focus here is on a so-called modular system in which sensor technology for various measurands such as temperature, moisture, pressure, or force are installed in plastic housing. Through energy harvesting the modules supply themselves with energy. The sensor signals are transmitted wirelessly via a Bluetooth interface. Up to 16 such sensor modules can then be connected to a gateway receiver. The first planned development with this technology entails the extension of the existing JUMO plastoSENS T04 pipe surface probe through a DFM module. Up to 3 pipe surface probes each could then be operated without auxiliary energy using a module that transmits the measurement signals wirelessly.

More Less

Product category: Control equipment

JUMO variTRON 500 as the "totally integrated solution"

JUMO is starting a new era of automation with the JUMO variTRON 500 central processing unit. In terms of technical possibilities the system plays in the top class of embedded systems and proves itself with the high speed performance and flexible operating philosophy.

For the first time, a completely new hardware and software platform is being used in the JUMO variTRON 500. During its development, "scalability" had the highest priority. The result is modular, flexible, and, above all, sustainable. The basis of the JUMO variTRON 500 is a hardware platform with an 800 MHz processor which can be used as a single, dual, or quad core variant depending on the application.

The software has a modular structure based on a Linux platform and enables excellent scalability for performance, memory, and interfaces. Another special feature is a customer-specific configuration and process data editor.

Several operator stations can be integrated into the system via CODESYS TargetVisu or CODESYS WebVisu as well as up to 64 intelligent connection modules.

In the future, JUMO will provide visualization libraries for individual customer-specific operation via CODESYS TargetVisu or CODESYS WebVisu. Flexibility is also made possible by the integration of all important fieldbus systems via CODESYS (such as Modbus RTU or TCP master and slave, PROFINET IO controller, EtherCAT master, and OPC UA server).

In the future, a PROFINET IO device interface will allow an alternative connection to higher-level control systems via Modbus TCP.

More Less

About us

Company data

Sales volume

> 100 Mill. US $

Export content

max. 75%

Number of employees

> 500

Foundation

1948

Area of business

Semi-finished products, technical parts and reinforced plastics

Target groups
  • Plastic product manufacturing
  • Chemical industry
  • Machinery construction
  • Packaging / distribution
  • Vehicle construction / aerospace
  • Electronics / electro technology
  • Medical technology / precision engineering / optics
  • Agriculture
  • Other industries