Fu Chun Shin (Ningbo) Machinery Manufacture Co., Ltd

No. 115, Haichuan Rd., Jiangbei Dist., 315032 Ningbo City, Zhejiang Province
Telephone +86 574 56138688
Fax +86 574 56138600

This company is main exhibitor of

Hall map

K 2019 hall map (Hall 12): stand B11

Fairground map

K 2019 fairground map: Hall 12


Christine Kuo





Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.002  Injection moulding machines
  •  Injection moulding machines, general purpose
  •  Injection moulding machines above 1000 kN to 4000 kN clamping force

Injection moulding machines above 1000 kN to 4000 kN clamping force

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.002  Injection moulding machines
  •  Injection moulding machines, general purpose
  •  Injection moulding machines above 4000 kN to 10000 kN clamping force
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.002  Injection moulding machines
  •  Injection moulding machines, general purpose
  •  Injection moulding machines above 10000 kN clamping force

Injection moulding machines above 10000 kN clamping force

Our products

Product category: Injection moulding machines above 4000 kN to 10000 kN clamping force

Two-Component Injection Molding Machine (FB-R Series)

It is rotary table two-component injection molding equipment, suitable for two-component and multi-component products, including automotive lamp housing, livelihood supplies, etc.
 1. When the rotary table rotates, it does not touch the mold plate to avoid wear and tear.
 2. Rotary table controlled by servo motor could shorten rotary time by more than 50%, with more stable rotary speed switch.
 3. With accurate rotary positioning clamper, it protects the mold.
4.  With the product insertion function, three-component and four-component products can also be molded to expand the scope of use.

More Less

Product category: Injection moulding machines above 4000 kN to 10000 kN clamping force

Advanced Servo Hydraulic Injection Molding Machine (FA Series)

It is a newly released model of advanced toggle hydraulic and servo energy-saving IMM by FCS. The applicable industries include houseware, stationary, automotive, and 3C industries.

1. Linear guide for injection carriage could lower the wear and tear, and make the injection control precise and stable.
2. Servo injection closed-loop system could accurately control the speed of each shot, the injection time stability is < 0.1%, and with stable molding product weight.
3. The integrated and optimized hydraulic manifold and cylinder, improve the injection response, and expand the product application range.
4. High mixing performance screw that improve L/D ratio and meet high injection volume products (and add D-screw choice for models above 250 ton)(optional).
5. Optional modular specification, offering the high-speed type for option, to flexibly meet the requirement such as food packaging and thin-walled container industries.
6. Adopted electric motor with brake which could offer stable adjusting control and position.
7. Tie bar spacing increase that more flexible choices for mold application.
8. Platen strength improvement that increase rigidity by 30%, lower deformation of mold plate, and improve the mold lifetime.
9. Smooth the mold closing speed curve design, and add the S curve speed command to reduce the machine vibration.

More Less

Product category: Injection moulding machines above 4000 kN to 10000 kN clamping force

Two Platen Injection Molding Machine (LM Series)

It is medium and large-sized plastic parts molding equipment. It is applicable to automotive industry such as bumper and instrument panel, air-conditioner compressor housing, and even pallet over 3000 tons .
1. The mold clamping stroke and capacity are bigger than traditional machines, making the machine suitable to produce more kinds of products especially plastic barrels with deep depth.
2. This machine has introduced the design of major companies in Europe. The wall structure has high rigidity with long service life.
3. Two-platen structure has shorter clamping unit which saves the factory space more than 30%.
4. During the injection, the pressurizing cylinder continues to provide compensating pressure, so that the clamping force is accurate, the error value is within ±1%.
5. Clamping unit without toggle structure which reduces lubrication and maintenance cost.

More Less

Company news




Apr 24, 2019

FCS CHINAPLAS 2019 Preview

You are sincerely welcome to visit FCS booth (3.1 F21) at CHINAPLAS 2019!

FCS Group is participating the 33rd International Exhibition on Plastics & Rubber (Chinaplas 2019). 2019 is the 35th year that FCS has been developing multi-component technique. FCS is going to expand display area and show brand new IMM and applications for multi-component, high speed, power saving and packaging in Chinaplas 2019 , to demonstrate the researched & developed technology, process integration, and the mission of “shape the better world”.

1.New generation molding system: FA Series
FA series is a newly released model of advanced servo hydraulic IMM by FCS. The specifications and design are upgraded and optimized which platen strength improvement increase 30%, high-performance servo energy-saving oil pump achieves GB first-class verification that rise in precision, stability and improve the mold lifetime.
The appearance of machine design combines human ergonomics concept and aesthetics, not only integrate the advantage of electrical control, also can operate iMF 4.0 Intelligent ManuFactory to satisfy most of the customized and high efficient requirements.

2.Multi-Colored & Multi-Component Injection Molding Machine: FB-R Series
FCS has been accumulating more than 40 years of multi-component that achieved leading position in injection molding industry. With design of dual color servo power-saving IMM has able to allocate four sets of injection unit, also has eighteen types of multi-component configuration which has maximum mold clamping force of 1900 tons.
With design of dual color power-saving IMM adopting closed-loop servo valve, two series toggle system upon Finite Element Analysis, rotary table positioning system and the patented clips that not only can stabilize and precise the injection molding process and products, also can increase injection speed that suitable for producing dual color of thin objects.
The FB-280R IMM is going to produce Infusion cap and the cycle time just need 30 seconds for 24 cavities that provides a best solution for medical appliance.

3.Rotary Shaft Multi-Component Injection Molding Machinee: FB-T Series
FB-T series adopts servo motor which can increase revolutions 30%-50% and efficient cycle time. There is a reciprocating 180-degree rotary table on the wall of moving car, which can produce multi-component products, injection and clamp adopt linear potentiometer, which can be precisely controlled with the precision of 0.1mm, the patented rotary axis structure can satisfy core’s moment of inertia that make stable and precise. FB-280T IMM is going to produce three-color toothbrush grip that achieve the diversified product design of multi-colored or multi-component application.

4.High-Performance Energy-Saving Injection Molding Machine: HN-h/p Series
HN-h/p series is characterized by precision, high speed, power-saving, stability and high efficiency. It’s equipped with closed-loop and injection speed increase by 50% to 150% that can significantly improve production efficiency and the precision and stability.
The HN-280p IMM adopts servo electric hot melt injection construction go with In Mold Labeling Turnkey Solution (IML) take 5~6 seconds to produce yogurt cup of 8 cavities, and applicable industries include high-end household goods, thin-walled food containers, high-speed molding of multi-cavity products.

More Less

Apr 24, 2019

Shape A Better World – PT. FCS RGP PLASTIC Grand Opening

One of FCS Group new business-PT. FCS RGP PLASTIC (FCS RGP) was officially established in Batam on 28th of March 2019, with great support from the Indonesian government.

FCS RGP is a joint venture invested by FCS, EVERRANK and ROYAL GOALSON. The registered capital is SGD 5,000,000 and total investment will be SGD 20,000,000. FCS RGP mainly provides recycled plastic pallets, recycled plastic trash cans, recycled plastic packaging materials, and various recycled plastic products. The 80% of production will be exported to United States, Singapore and Malaysia, another 20% is for the Indonesian domestic market.

FCS RGP plans to employ about 300 local employees to concentrate on training for the operation and maintenance of high-tech equipment, to gradually reduce the proportion of skilled workers from overseas.
FCS RGP adopts FCS high-tech equipment and technology to attain the requirements of green plastics enterprises, also strives for achieving the environmental production goals: They are “zero-emission sewage”, “zero-emission exhaust gas”, “zero-emission garbage”, and “use recycled plastic material instead of deforestation” to protect the local ecology and to create a healthy and friendly environment.

FCS Mission : We take innovative actions to …
- deliver efficient products,
- encourage excellent humanities,
- create green environment, and SHAPE A BETTER WORLD

Contact FCS RG & FCS RGP:

101 Lorong Sarina
#01-01 Casa Sarina
Singapore 416729
TEL: +65 9833 2800
FAX: +65 9120 2788
Email: marketing@fcsrg.com.sg

More Less

About us

Company details

FCS Group, based in Taiwan, was established 45 years ago and is well known in Asia as a quality manufacturer of machinery, offering several lines of injection molding machines and other specialty and customized equipment.  In addition to the main factory and development center near Tainan, Taiwan, FCS has two additional factories in China.  The company is the only injection molding manufacturer publicly traded on the Taiwan stock exchange.

FCS manufactures injection molding machines ranging from 600 – 40000 kN with a specialty on energy saving hydraulic systems and the ability to provide turnkey total solutions for production requirements.  Additional machinery specialties are multi-component injection molding, machines for packaging and presses for rubber and thermoset applications.

Meanwhile, FCS Group first announced the iMF 4.0 (Intelligent ManuFactory) smart manufacturing system since 2018, and set up a demonstration factory in Tainan Headquarters to provide real-world solution for the industry 4.0 applications that are needed by injection molding industry customers.

Welcome to visit FCS for starting your smart injection molding.

More Less

Company data

Sales volume

> 100 Mill. US $

Export content

max. 75%

Number of employees

> 500



Area of business
  • Machinery and equipment for the plastics and rubber industries
  • Services for the plastics and rubber industries
Target groups
  • Plastic product manufacturing
  • Machinery construction
  • Packaging / distribution
  • Vehicle construction / aerospace
  • Electronics / electro technology