IMAC Tecnologie srl
Via Nino Bixio 7,
20835
Muggiò
Italy
Italy
Location
Hall map
Fairground map
Our range of products
Product categories
- 03 Machinery and equipment for the plastics and rubber industries
- 03.03 Post processing machines and downstream equipment
- 03.03.004 Cutting machines
Cutting machines
Our products
Product category: Cutting machines
“Fly-Knife” Cutting
Automatic cutting systems for extruded plastic materials
The “Fly-knife” cut made by IMAC TECNOLOGIE consists of the skilful use of a Brushless motor that acts directly on an arm that carries the blade.
In the wide range of blades available our technicians choose the most suitable for the type of material, its shape, consistency, temperature, speed, in order to always obtain a perfectly orthogonal cut and without “burrs”.
Our cutting systems can be positioned:
directly in the extrusion line
or they can be fed by coils, coils or bars
Our cutting systems are suitable for:
industrial environments and materials
medical environments and materials
Our “Fly-Knife” cutting systems are suitable for cutting elastomers:
with hardness of 95 Shore A,
with a hardness of 70 Shore D after an appropriate preheating of the product.
The “Fly-knife” cut made by IMAC TECNOLOGIE consists of the skilful use of a Brushless motor that acts directly on an arm that carries the blade.
In the wide range of blades available our technicians choose the most suitable for the type of material, its shape, consistency, temperature, speed, in order to always obtain a perfectly orthogonal cut and without “burrs”.
Our cutting systems can be positioned:
directly in the extrusion line
or they can be fed by coils, coils or bars
Our cutting systems are suitable for:
industrial environments and materials
medical environments and materials
Our “Fly-Knife” cutting systems are suitable for cutting elastomers:
with hardness of 95 Shore A,
with a hardness of 70 Shore D after an appropriate preheating of the product.
Product category: Cutting machines
Guillotine cut
Automatic cutting systems for extruded plastic materials
The guillotine cut realized by IMAC TECNOLOGIE consists in the use of the Brushless motor that acts, through a recirculating ball screw, directly on the blade holder.
According to the material, IMAC TECNOLOGIE technicians choose the most suitable type of blade to always have a clean cut without burrs.
Our cutting systems can be positioned:
directly in the extrusion line
or thy can be fed by coils or bars
The IMAC TECNOLOGIE guillotine cutting systems can be:
Orthogonal cut
Cutting with variable angle (60° left/right)
Both types of machines are equipped with conveyor belts and guide systems for the material to be cut both in the inlet and in the unloading phase.
The guillotine cut realized by IMAC TECNOLOGIE consists in the use of the Brushless motor that acts, through a recirculating ball screw, directly on the blade holder.
According to the material, IMAC TECNOLOGIE technicians choose the most suitable type of blade to always have a clean cut without burrs.
Our cutting systems can be positioned:
directly in the extrusion line
or thy can be fed by coils or bars
The IMAC TECNOLOGIE guillotine cutting systems can be:
Orthogonal cut
Cutting with variable angle (60° left/right)
Both types of machines are equipped with conveyor belts and guide systems for the material to be cut both in the inlet and in the unloading phase.
About us
Company details
Our company was created from the evolution of a small company in Brianzola, in Lombardy, Italy that worked for over twenty years in the field of machine tools and special plant. The broad wealth of experience that was gained in many aspects of this sector, has enabled us to penetrate today’s market with cutting-edge technology by offering essential solutions to clients and maintain the standards of quality and productivity required in the current economic climate.
The company operates in the following sectors:
• cutting machine tools,
• automatic machines for cutting and processing of extruded plastic material,
• control systems and industrial process testing.
We produce new machines or refurbish used equipment, upgrading the mechanical and electronic systems. We build new generation lathes for cutting metal meeting the needs and expectations of customers. Applied electronic and hydraulic technologies, supported by reliable mechanical structures enable simultaneous multitasking processing, increasing productivity. We also produce special installations for cutting plastic materials with high-tech and productive solutions.
The company operates in the following sectors:
• cutting machine tools,
• automatic machines for cutting and processing of extruded plastic material,
• control systems and industrial process testing.
We produce new machines or refurbish used equipment, upgrading the mechanical and electronic systems. We build new generation lathes for cutting metal meeting the needs and expectations of customers. Applied electronic and hydraulic technologies, supported by reliable mechanical structures enable simultaneous multitasking processing, increasing productivity. We also produce special installations for cutting plastic materials with high-tech and productive solutions.