Manage stand orders
Select Option
DCM USIMECA SAS
45, avenue des Guilleraies,
92000
Nanterre Cedex
France
France
Location
Hall map
Fairground map
Our range of products
Product categories
- 03 Machinery and equipment for the plastics and rubber industries
- 03.03 Post processing machines and downstream equipment
- 03.03.005 Winding equipment
Winding equipment
- 03 Machinery and equipment for the plastics and rubber industries
- 03.03 Post processing machines and downstream equipment
- 03.03.006 Slitter rewinders
Slitter rewinders
- 03 Machinery and equipment for the plastics and rubber industries
- 03.04 Machinery and plant for finishing, decorating, printing and marking
- 03.04.001 Printing equipment for plastic and rubber products
Printing equipment for plastic and rubber products
- 03 Machinery and equipment for the plastics and rubber industries
- 03.04 Machinery and plant for finishing, decorating, printing and marking
- 03.04.004 Laminating plant
Laminating plant
Our products
Product category: Slitter rewinders
Slitter Rewinder Tigre
Slitter Center rewinding
Turret rewinding
TIGRE is a double-turret slitter rewinder. This type of rewinder is the best solution for many converters because it meets both today’s and tomorrow’s needs. The reloading time is less than 25 seconds and the friction rewinding shafts and advanced web tension control allow cutting of all films and laminates commonly used in flexible packaging. An automated unloading system further lightens the operator’s workload.
MAIN SPECIFICATIONS
Turret rewinding
TIGRE is a double-turret slitter rewinder. This type of rewinder is the best solution for many converters because it meets both today’s and tomorrow’s needs. The reloading time is less than 25 seconds and the friction rewinding shafts and advanced web tension control allow cutting of all films and laminates commonly used in flexible packaging. An automated unloading system further lightens the operator’s workload.
MAIN SPECIFICATIONS
- Width : 800 mm up to 1600 mm
- Diameter at unwinder : 1000 mm or 1300 mm
- Diameter at rewinder : 610 mm
- Production speed : 600 m/min
- Reloading time : less than 25 sec
- Labels for drinks
- Candies packaging
- Food packaging, hygiene, cosmetic
Applications
Packaging
Target Products
Film/Sheet
Product category: Slitter rewinders
Léopard LMA
SLITTER REWINDER
Center rewinding
Turret rewinder
LEOPARD is a slitter-rewinder equipped with a single-turret rewinder with an automatic cycle. It enables very high productivity that can be reached with non-stretchable materials with low thickness variation such as papers, PET, OPP, Foil and Laminates of regular thickness.
MAIN SPECIFICATIONS
paper – PET – OPP – Aluminium – Laminates of regular thickness
Center rewinding
Turret rewinder
LEOPARD is a slitter-rewinder equipped with a single-turret rewinder with an automatic cycle. It enables very high productivity that can be reached with non-stretchable materials with low thickness variation such as papers, PET, OPP, Foil and Laminates of regular thickness.
MAIN SPECIFICATIONS
- Width: 800 mm to 1600 mm
- Diameter at unwinder: 1000 mm or 1300 mm
- Rewinder diameter: up to 900 mm
- Production speed: 600 m/min
- Reloading time: less than 30 seconds
- Razor and rotary cutter cutting station
- High range of applications and materials
paper – PET – OPP – Aluminium – Laminates of regular thickness
Applications
Packaging
Target Products
Film/Sheet
Product category: Slitter rewinders
Panthere 4
SLITTER REWINDER
Center rewinding
Versatility and high performances
PANTHERE is a slitter-rewinder well known to many converters all over the world. It is highly appreciated for its rewinding capacity (800 mm diameter reels), its easy adjustment and the quality of its production. This is due to its accurate tension control and cutting precision.
The machine’s performance level and quality are widely recognised, along with its high reliability.
MAIN SPECIFICATIONS
Center rewinding
Versatility and high performances
PANTHERE is a slitter-rewinder well known to many converters all over the world. It is highly appreciated for its rewinding capacity (800 mm diameter reels), its easy adjustment and the quality of its production. This is due to its accurate tension control and cutting precision.
The machine’s performance level and quality are widely recognised, along with its high reliability.
MAIN SPECIFICATIONS
- Width: 800 to 1600 mm
- Diameter at unwinder: 1000 or 1300 mm
- Diameter at rewinders: 2 x 800 mm
- Minimum cut: 20 mm
- Production speed: 600 m/min
- Candies (twist, overstrip, understrip)
- Food packaging, cosmetic, toilet, frozen products
- Copper layer bobbins
- Glass fabric reels
- film – paper – board – aluminium …
Applications
Packaging
Target Products
Film/Sheet
Product category: Slitter rewinders
Léopard 2
SLITTER-REWINDER
Axiale and surface Slitter Rewinder
The LEOPARD 2 is dedicated to slit and rewind cigarette paper, gum and cork tipping filter.
MAIN SPECIFICATIONS
Mother reel width 800 to 1600 mm
Mother reel diameter 1000 or 1300 mm
Slit reel diameter max 600 mm
Maximum speed 500 m/min
Reels unloading with cantilever mandrels
APPLICATIONS
paper – light board
Axiale and surface Slitter Rewinder
The LEOPARD 2 is dedicated to slit and rewind cigarette paper, gum and cork tipping filter.
MAIN SPECIFICATIONS
Mother reel width 800 to 1600 mm
Mother reel diameter 1000 or 1300 mm
Slit reel diameter max 600 mm
Maximum speed 500 m/min
Reels unloading with cantilever mandrels
APPLICATIONS
- Cigarette paper
- Gum paper
- Cork tipping paper.
paper – light board
Product category: Slitter rewinders
Puma
SLITTER REWINDER
Surface rewinder
Based on savoir faire over more than four decades, DCM offers surface slitter rewinder for paper.
MAIN SPECIFICATIONS
Surface rewinder
Based on savoir faire over more than four decades, DCM offers surface slitter rewinder for paper.
MAIN SPECIFICATIONS
- Width: from 800 to 1600 mm
- Unwinder diameter reels: 1000 / 1300 mm
- Rewinder diameter reels: 1300 mm
- Production speed: 600 m/min
- Any type of board
- Intermediate products for edge board and tube making
- paper – light board
About us
Company details
DCM, French company at the root of the group, has been founded in 1953.
DCM gathers today two ranges of machines: DCM and ATN.Our company works to develop and manufacture machines for packaging converters.
These two ranges enable DCM to be active in two complementary market segments:
- Paper and cardboard converting machines for liquid packaging and the tobacco packaging industry, developed by ATN.
- Flexible material converting machines (particularly for food packaging), designed and manufactured by DCM.
DCM gathers today two ranges of machines: DCM and ATN.Our company works to develop and manufacture machines for packaging converters.
These two ranges enable DCM to be active in two complementary market segments:
- Paper and cardboard converting machines for liquid packaging and the tobacco packaging industry, developed by ATN.
- Flexible material converting machines (particularly for food packaging), designed and manufactured by DCM.