Jinhua Yonghe Fluorochemical Co., Ltd. of Jinhua at K 2019 in Düsseldorf -- K Trade Fair

Jinhua Yonghe Fluorochemical Co., Ltd.

Jinxi Development Area, Qing Lian Road, 321075 Jinhua
China
Telephone +86 136 76615017
Fax +86 579 83186717
yonghe_gas6@qhyh.com

Hall map

K 2019 hall map (Hall 7, level 2): stand F07

Fairground map

K 2019 fairground map: Hall 7, level 2

Our range of products

Product categories

  • 01  Raw materials, auxiliaries
  • 01.01  Thermoplastics
  • 01.01.128  Tetrafluoroethylene/perfluoropropylene copolymers (FEP)

Our products

Product category: Tetrafluoroethylene/perfluoropropylene copolymers (FEP)

Niflon FEP M-1

Application: Molding material, with excellent stress cracking resistance, mainly used for lining of pipe and valve.

Recommended processing conditions:
Heating Temperature: 330-350℃
Heating Time: 30-180min
Pressure-holding Time: 5-20min
Cooling Time: 5-10min
It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as:HAC-276

Package: It is semi-transparent solid resins packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.

Storage: Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust.

More Less

Product category: Tetrafluoroethylene/perfluoropropylene copolymers (FEP)

Niflon FEP EW-1

Application: Low melt extruding material, with good stress cracking resistance, mainly used for tubing, film, insulation and jacket of wire & cable.

Recommended processing conditions:
Extruding Machine L/D: 25:1-30:1
Screw Compression ratio: 3:1
Equilibrium Ratio (DDR):7-15
DRB: 0.95-1.03
Extrusion Speed:10-20m/min
It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as: HAC-276

Package: It is semi-transparent solid resins packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.

Storage: Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust.

More Less

Applications
Civil Engineering, Cable Systems/Installation

Target Products
Complex Geometry

Product category: Tetrafluoroethylene/perfluoropropylene copolymers (FEP)

Niflon FEP EW-2

Application: Low melt extruding material, with good stress cracking resistance mainly used for insulation and jacket of wire & cable, film and thin walled tube.

Recommended processing conditions:
Extruding Machine L/D: 25:1-30:1
Screw Compression ratio: 3:1
Equilibrium Ratio (DDR):15-35
DRB: 0.95-1.05
Extrusion Speed:20-40m/min
It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as: HAC-276

Package: It is semi-transparent solid resins packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.

Storage: Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust.

More Less

Product category: Tetrafluoroethylene/perfluoropropylene copolymers (FEP)

Niflon FEP EW-3

Application: Extruding material, with good stress cracking resistance, mainly used for insulation and jacket of wire & cable, tubing and film.

Recommended processing conditions:
Extruding Machine L/D: 25:1-30:1
Screw Compression ratio: 3:1
Equilibrium Ratio (DDR):40-100
DRB:1.0-1.03
Extrusion Speed:50-80m/min
It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as: HAC-276

Package: It is semi-transparent solid resins packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.

Storage: Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust.

More Less

Product category: Tetrafluoroethylene/perfluoropropylene copolymers (FEP)

FEP EW-4

Application: Extruding material, mainly used for the insulation and jacket of wire & cable.

Recommended processing conditions:
Extruding Machine L/D: 25:1-30:1
Screw Compression ratio: 3:1
Equilibrium Ratio (DDR):80-120
DRB:0.95-1.05
Extrusion Speed:80-120m/min
It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as: HAC-276

Package: It is semi-transparent solid resins packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.

Storage: Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust.

More Less

Applications
Cable Systems/Installation

Target Products
Complex Geometry

Product category: Tetrafluoroethylene/perfluoropropylene copolymers (FEP)

Niflon FEP EW-5

Application: Extruding material, mainly used for the insulation and jacket of high speed and thin wire & cable.

Recommended processing conditions:
Extruding Machine L/D: 25:1-30:1
Screw Compression ratio: 3:1
Equilibrium Ratio (DDR):120-150
DRB:1.0-1.03
Extrusion Speed:100-160m/min
It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as: HAC-276

Package: It is semi-transparent solid resins packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.

Storage: Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust.

More Less

Product category: Tetrafluoroethylene/perfluoropropylene copolymers (FEP)

Niflon FEP EW-6

Fluorinated Ethylene-Propylene Resin (FEP) is a copolymer of TFE and HFP with good thermal stability, outstanding chemical inertness, good electrical insulation and low friction coefficient. It can be processed by thermoplastic processing method.

Application: Extruding material, mainly used for the insulation of high speed and thin wire and cable.

Recommended processing conditions:
Extruding Machine L/D: 25:1-30:1
Screw Compression ratio: 3:1
Equilibrium Ratio (DDR):150-170
DRB:1.0-1.05
Extrusion Speed:120-200m/min
It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as: HAC-276

Package: It is semi-transparent solid resins packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.

Storage: Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust.

More Less

Product category: Tetrafluoroethylene/perfluoropropylene copolymers (FEP)

Niflon FEP EW-511

Fluorinated Ethylene-Propylene Resin (FEP) is a copolymer of TFE and HFP with good thermal stability, outstanding chemical inertness, good electrical insulation and low friction coefficient. It can be processed by thermoplastic processing method.

Application: Extruding material, mainly used for the insulation of high speed and thin wire and cable with better purity and less fish eye.

Recommended processing conditions:
Extruding Machine L/D: 25:1-30:1
Screw Compression ratio: 3:1
Equilibrium Ratio (DDR):120-150
DRB:1.0-1.05
Extrusion Speed:100-160m/min
It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as: HAC-276

Package: It is semi-transparent solid resins packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.

Storage: Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust. 

More Less

Product category: Tetrafluoroethylene/perfluoropropylene copolymers (FEP)

Niflon FEP EW-521

Fluorinated Ethylene-Propylene Resin (FEP) is a copolymer of TFE and HFP with good thermal stability, outstanding chemical inertness, good electrical insulation and low friction coefficient. It can be processed by thermoplastic processing method.

Application: EW-521 is new product developed in 2015 with new process method and ingredients.With improved physical performance and crack resistance,EW-521 keeps good performance for dielectrical properties.Mainly used for the insulation of high speed and thin wires & cables with high requirement for crack resistance.

Recommended processing conditions:
Extruding Machine L/D: 25:1-30:1
Screw Compression ratio: 3:1
Equilibrium Ratio (DDR):120-150
DRB:1.0-1.05
Extrusion Speed:100-200m/min
It is corrosive to most metals, and anti-corrosion materials are suggested for the extruding machines,such as: HAC-276

Package: It is semi-transparent solid resins packed in PE bag and put in paper drum or in double-layer reinforced plastic bag, net wt. 25kgs/package.

Storage: Stored in clean, cool and dry places; avoid direct sunlight, moisture and dust.

More Less

Applications
Electric Cable

Target Products
Complex Geometry

About us

Company details

Jinhua Yonghe Fluorochemical Co., Ltd., belongs to Yonghe Group, is a professional manufacturing enterprise for refrigerant gas and fluorochemical products. We can provide customers high-quality "IceLoong" brand refrigerants and "Niflon" brand fluoropolymer materials. Refrigerant products include HCFC-22,  HFC-125 and mixed refrigerants while fluoropolymer products include FEP resin, FEP dispersion liquid, PTFE dispersion liquid etc.

In 2014, Yonghe Fluoride Material High-tech Research and Development Center was set up, consisting of R&D, QC and Technical Support department. The Center covers more than 1000㎡and has several laboratories for polymer synthesis and analytic test. Equipments include FTIR spectrometer, DSC, color sorter, press vulcanizer, gas chromatograph, melt flow indexer, lump detector, extruder etc.

More Less