MPI Chemie B.V. of Houten at K 2019 in Düsseldorf -- K Trade Fair

MPI Chemie B.V.

De Bouw 1a, 3991 SX Houten
Netherlands
Telephone +31 30 6352186
Fax +31 30 6352185
sales@mpi-chemie.com

This company is main exhibitor of

Hall map

K 2019 hall map (Hall 7, level 1): stand C27

Fairground map

K 2019 fairground map: Hall 7, level 1

Contact

Jochem Krijnen

Business Development

De Bouw 1-A
3991SX Houten, Netherlands

Phone
+31 30 6352186

Email
jochem.krijnen@mpi-chemie.com

Bas van Ierland

Sales

De Bouw 1-A
3991SX Houten, Netherlands

Phone
+31 30 6352186

Email
sales@mpi-chemie.com

Ralf van Oosterom

Sales

De Bouw 1-A
3991SX Houten, Netherlands

Phone
+31 30 6352186

Email
sales@mpi-chemie.com

Our range of products

Product categories

  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.016  Antioxidants
  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.028  Fire protection agents
  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.071  Light stabilisers (s. UV stabilizers)
  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.082  Optical brighteners
  • 01  Raw materials, auxiliaries
  • 01.13  Starting materials, intermediate, polymerisation auxiliaries
  • 01.13.031  Peroxides

Our products

Product category: UV stabilizer

Milestab UV-1

Chemical name: ethyl 4-[[(methylphenylamino)methylene]amino]benzoate
CAS number: 57834-33-0
EC number: 260-976-0

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-9 / 90

Chemical name: oxybenzone; 2-hydroxy-4-methoxybenzophenone
CAS number: 131-57-7
EC number: 205-031-5

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: Light stabilisers (s. UV stabilizers)

Milestab LS-119

Chemical name: N,N',N'',N'''-tetrakis(4,6-bis(butyl-(N-methyl-2,2,6,6-tetramethylpiperidin-4-yl)amino)triazin-2-yl)-4,7-diazadecane-1,10-diamine
CAS number: 106990-43-6
EC number: 401-990-0

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Hindered amine light stabilizers (HALS) are extremely effective in polyolefins and polyurethane.

More Less

Product category: Antioxidants

MileOx 1330

Chemical name: 1,3,5-trimethyl-2,4,6-tris(3,5-di-t-butyl-4-hydroxybenzyl)benzene
CAS number: 1709-70-2

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Antioxidants (AO) are used to terminate the oxidation reactions caused by different weathering conditions and reduce the degradation of organic materials. They inhibit the formation of free radicals thereby enhancing the photo- and heat-stability of polymers.

More Less

Product category: Antioxidants

MileOx 1425

Chemical name: calcium diethyl bis[[[3,5-bis(1,1-dimethylethyl)-4- hydroxyphenyl]methyl]phosphonate]
CAS number: 65140-91-2
EC number: 265-512-0

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Antioxidants (AO) are used to terminate the oxidation reactions caused by different weathering conditions and reduce the degradation of organic materials. They inhibit the formation of free radicals thereby enhancing the photo- and heat-stability of polymers.

More Less

Product category: Antioxidants

MileOx 445

Chemical name: 4-(1-methyl-1-phenylethyl)-N-[4-(1-methyl-1- phenylethyl)phenyl]aniline
CAS number: 10081-67-1
EC number: 233-215-5

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Antioxidants (AO) are used to terminate the oxidation reactions caused by different weathering conditions and reduce the degradation of organic materials. They inhibit the formation of free radicals thereby enhancing the photo- and heat-stability of polymers.

More Less

Product category: Antioxidants

MileOx 549

Chemical name: 2-(1-(2-hydroxy-3,5-di-tert-pentyl-phenyl)ethyl)-4,6-di-tert- pentylphenyl acrylate
CAS number: 123968-25-2
EC number: 413-850-6

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Antioxidants (AO) are used to terminate the oxidation reactions caused by different weathering conditions and reduce the degradation of organic materials. They inhibit the formation of free radicals thereby enhancing the photo- and heat-stability of polymers.

More Less

Product category: Antioxidants

MileOx 565

Chemical name: 2,6-di-tert-butyl-4-(4,6-bis(octylthio)-1,3,5-triazin-2- ylamino)phenol
CAS number: 991-84-4
EC number: 213-590-1

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Antioxidants (AO) are used to terminate the oxidation reactions caused by different weathering conditions and reduce the degradation of organic materials. They inhibit the formation of free radicals thereby enhancing the photo- and heat-stability of polymers.

More Less

Product category: Antioxidants

MileOx MD 1024

Chemical name: 2',3-bis[[3-[3,5-di-tert-butyl-4- hydroxyphenyl]propionyl]]propionohydrazide
CAS number: 32687-78-8
EC number: 251-156-3

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Antioxidants (AO) are used to terminate the oxidation reactions caused by different weathering conditions and reduce the degradation of organic materials. They inhibit the formation of free radicals thereby enhancing the photo- and heat-stability of polymers.

More Less

Product category: Antioxidants

MileOx 1425

Chemical name: calcium diethyl bis[[[3,5-bis(1,1-dimethylethyl)-4- hydroxyphenyl]methyl]phosphonate]
CAS number: 65140-91-2
EC number: 265-512-0

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Antioxidants (AO) are used to terminate the oxidation reactions caused by different weathering conditions and reduce the degradation of organic materials. They inhibit the formation of free radicals thereby enhancing the photo- and heat-stability of polymers.

More Less

Product category: Light stabilisers (s. UV stabilizers)

Milestab LS-123

Chemical name: bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate
CAS number: 129757-67-1
EC number: 406-750-9

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Hindered amine light stabilizers (HALS) are extremely effective in polyolefins and polyurethane.

More Less

Product category: Light stabilisers (s. UV stabilizers)

Milestab LS-292 / 765

Chemical name: bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate & methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate
CAS numbers: 1065336-91-5, 41556-26-7, 82919-37-7
EC number: 915-687-0

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Hindered amine light stabilizers (HALS) are extremely effective in polyolefins and polyurethane.

More Less

Product category: Light stabilisers (s. UV stabilizers)

Milestab LS-770

Chemical name: bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate
CAS number: 52829-07-9
EC number: 258-207-9

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Hindered amine light stabilizers (HALS) are extremely effective in polyolefins and polyurethane.

More Less

Product category: Light stabilisers (s. UV stabilizers)

Milestab LS-1084

Chemical name: (butylamine)[[2,2'-thiobis[4-(1,1,3,3-tetramethylbutyl)phenolato]](2-)-O,O',S]nickel
CAS number: 14516-71-3
EC number: 238-523-3

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Hindered amine light stabilizers (HALS) are extremely effective in polyolefins and polyurethane.

More Less

Product category: Light stabilisers (s. UV stabilizers)

Milestab LS-3346

Chemical name: Poly [(6-morpholino-s-triazine-2,4-diyl)[2,2,6,6-tetramethyl-4-piperidyl) imino]- hexamethylene[(2,2,6,6-tetramethyl-4-piperidyl) imino]]
CAS number: 82451-48-7

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Hindered amine light stabilizers (HALS) are extremely effective in polyolefins and polyurethane.

More Less

Product category: Light stabilisers (s. UV stabilizers)

Milestab LS-3529

Chemical name: 1,6-Hexanediamine, N,N’-bis(2,2,6,6-tetramethyl-4-piperidinyl)-, polymers with morpholine-2,4,6-trichloro-1,3,5-triazine reaction products, methylated
CAS number: 193098-40-7

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Hindered amine light stabilizers (HALS) are extremely effective in polyolefins and polyurethane.

More Less

Product category: Light stabilisers (s. UV stabilizers)

Milestab LS-3853 (PP50)

Chemical name: 4-piperidol-2, 2, 6, 6-Tetramethyl-RPW stearin;
CAS number: 167078-06-0

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Hindered amine light stabilizers (HALS) are extremely effective in polyolefins and polyurethane.

More Less

Product category: Light stabilisers (s. UV stabilizers)

Milestab LS-4050

Chemical name: N,N'-1,6-hexanediylbis(N-(2,2,6,6-tetramethyl-piperidin-4-yl)formamide
CAS number: 124172-53-8
EC number: 413-610-0

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Hindered amine light stabilizers (HALS) are extremely effective in polyolefins and polyurethane.

More Less

Product category: Light stabilisers (s. UV stabilizers)

Milestab LS-5050

Chemical name: Alkenes, C20-24 α-, polymers with maleic anhydride, reaction products with 2,2,6,6-tetramethyl-4-piperidinamine
CAS number: 152261-33-1
EC number: 604-838-3

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. Hindered amine light stabilizers (HALS) are extremely effective in polyolefins and polyurethane.

More Less

Product category: Optical brighteners

MPI Bright 100 (OB)

Chemical name: 2,5-thiophenediylbis(5-tert-butyl-1,3-benzoxazole)
CAS number: 7128-64-5
EC number: 230-426-4

Optical brighteners (OB) are fluorescent whitening agents, designed to brighten colours or mask yellowing in plastics, lacquers, paints, inks, photo-processing solutions and fibres. They function by absorbing invisible ultraviolet radiation and re-emitting it as visible light in the blue range of the spectrum. Optical brighteners are particularly effective in masking the yellowish cast  sometimes observed in plastics and fibres after high temperature processing operations. They are also used in substrates  containing pigments or dyes to make the colours appear more brilliant. Lastly, they can be used as a tool to check the application of transparant layers by means of UV tracing.

More Less

Product category: Optical brighteners

MPI Bright 200 (OB1)

Chemical name: 2,2'-(vinylenedi-p-phenylene)bisbenzoxazole
CAS number: 1533-45-5
EC number: 216-245-3

Optical brighteners (OB) are fluorescent whitening agents, designed to brighten colours or mask yellowing in plastics, lacquers, paints, inks, photo-processing solutions and fibres. They function by absorbing invisible ultraviolet radiation and re-emitting it as visible light in the blue range of the spectrum. Optical brighteners are particularly effective in masking the yellowish cast sometimes observed in plastics and fibres after high temperature processing operations. They are also used in substrates containing pigments or dyes to make the colours appear more brilliant. Lastly, they can be used as a tool to check the application of transparant layers by means of UV tracing.

More Less

Product category: Optical brighteners

MPI Bright FP 127

Chemical name: 4,4'-bis(2-methoxystyryl)-1,1'-biphenyl
CAS number: 40470-68-6
EC number: 254-935-6

Optical brighteners (OB) are fluorescent whitening agents, designed to brighten colours or mask yellowing in plastics, lacquers, paints, inks, photo-processing solutions and fibres. They function by absorbing invisible ultraviolet radiation and re-emitting it as visible light in the blue range of the spectrum. Optical brighteners are particularly effective in masking the yellowish cast sometimes observed in plastics and fibres after high temperature processing operations. They are also used in substrates containing pigments or dyes to make the colours appear more brilliant. Lastly, they can be used as a tool to check the application of transparant layers by means of UV tracing.

More Less

Product category: UV stabilizer

Milestab UV-81 (531)

Chemical name: Octabenzone; 2-Hydroxy-4-n-Octoxy Benzophenone; Methanone, [2-hydroxy-4-(octyloxy)phenyl]phenyl,-
CAS number: 1843-05-6
EC number: 217-421-2

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-234

Chemical name: 2-(2H-benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol
CAS number: 70321-86-7
EC number: 274-570-6

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-326

Chemical name: bumetrizole; 2-(3-tert-butyl-2-hydroxy-5-methylphenyl)-5-chlorobenzotriazole
CAS number: 3896-11-5
EC number: 223-445-4

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-329 (5411)

Chemical name: octrizole; 2-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol
CAS number: 3147-75-9
EC number: 221-573-5

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-360

Chemical name: bisoctrizole; 2,2'-methylenebis(6-(2H-benzotriazol-2-yl)-4-(1,1,3,3- tetramethylbutyl)phenol)
CAS number: 103597-45-1
EC number: 403-800-1

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-571

Chemical name: 2-(2H-Benzothiazol-2-yl)-6-dodecyl-4-methylphenol, branched and linear
CAS number: 125304-04-3, 23328-53-2, 104487-30-1
EC number: 401-680-5

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-928

Chemical name: 2-(2-hydroxyphenyl)-benzotriazole
CAS number: 73936-91-1

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-1130

Chemical name: Hydrophilic modified benzotriazole (mixture)
CAS number: 104810-48-2, 104810-47-1, 25322-68-3

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-1164

Chemical name: 2-(4,6-bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5- (octyloxy)-phenol
CAS number: 2725-22-6
EC number: 412-440-4

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-1577

Chemical name: 2-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-((hexyl)oxy)-phenol
CAS number: 147315-50-2
EC number: 411-380-6

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-3035

Chemical name: Etocrilene; Ethyl-2-cyano-3,3-diphenyl acrylate
CAS number: 5232-99-5
EC number: 226-029-0

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-3039

Chemical name: Octocrilene; 2-ethylhexyl-2-cyano-3,3-diphenylacrylate
CAS number: 6197-30-4
EC number: 228-250-8

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and hence reduces the rate of weathering.

More Less

Product category: UV stabilizer

Milestab UV-P

Chemical name: drometrizole; 2-(2H-benzotriazol-2-yl)-p-cresol 2-(2'-Hydroxy-5'-methylphenyl)benzotriazole
CAS number: 2440-22-4
EC number: 219-470-5

Stabilizers for polymers are used singly or in combinations to prevent the oxidation, chain fission, uncontrolled recombinations and cross-linking reactions that are caused by photo-oxidation of polymers. Polymers become weathered by the direct or indirect impact of heat and ultraviolet light. UV absorbers dissipate the absorbed light energy from UV rays as heat by reversible intramolecular proton transfer. The addition of a UV absorber reduces the absorption of UV rays by the polymer matrix and  hence reduces the rate of weathering.

More Less

Product category: Fire protection agents

Milebrome 1025

Chemical name: Poly(pentabromobenzyl acrylate)
Synonym: 2-Propenoic acid (pentabromophenylmethyl) ester, homopolymer
CAS number: 59447-57-3

Brominated flame retardants (BFR) are organobromide compounds that have an inhibiting effect on the ignition of  combustible organic materials. They are widely used, being very effective in standard and engineering plastics and textile applications. Brominated flame retardants are also commonly used in electronic products, building materials and furniture as a means of reducing the flammability of the product.

More Less

Product category: Fire protection agents

Milebrome 8010

Chemical name: Decabromodiphenylethane
Synonym: 1,1'-(ethane-1,2-diyl)bis[pentabromobenzene]
CAS number: 84852-53-9
EC number: 284-366-9

Brominated flame retardants (BFR) are organobromide compounds that have an inhibiting effect on the ignition of combustible organic materials. They are widely used, being very effective in standard and engineering plastics and textile applications. Brominated flame retardants are also commonly used in electronic products, building materials and furniture as a means of reducing the flammability of the product.

More Less

Product category: Fire protection agents

Milebrome B-972

Chemical name: 1,1'-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)benzene]
CAS number: 97416-84-7
EC number: 306-832-3

Brominated flame retardants (BFR) are organobromide compounds that have an inhibiting effect on the ignition of combustible organic materials. They are widely used, being very effective in standard and engineering plastics and textile applications. Brominated flame retardants are also commonly used in electronic products, building materials and furniture as a means of reducing the flammability of the product.

More Less

Product category: Fire protection agents

Milebrome BT 93W

Chemical name: Ethylenbistetrabromophtalimide
Synonym: N,N'-ethylenebis(3,4,5,6-tetrabromophthalimide)
CAS number: 32588-76-4
EC number: 251-118-6

Brominated flame retardants (BFR) are organobromide compounds that have an inhibiting effect on the ignition of combustible organic materials. They are widely used, being very effective in standard and engineering plastics and textile applications. Brominated flame retardants are also commonly used in electronic products, building materials and furniture as a means of reducing the flammability of the product.

More Less

Product category: Fire protection agents

Milebrome FR 50 (PE68)

Chemical name: Tetrabromobisphenol A bis (2,3-dibromopropyl ether)
Synonym: 1,1'-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene]
CAS number: 21850-44-2
EC number: 244-617-5

Brominated flame retardants (BFR) are organobromide compounds that have an inhibiting effect on the ignition of combustible organic materials. They are widely used, being very effective in standard and engineering plastics and textile applications. Brominated flame retardants are also commonly used in electronic products, building materials and furniture as a means of reducing the flammability of the product.

More Less

Product category: Fire protection agents

APP

Chemical name: Ammonium Polyphosphate (standard and melamine- / silicone coated)
CAS number: 68333-79-9

Non-halogenated flame retardants (FR) are based on the elements phosphorus and nitrogen. The phosphoruscontaining flame retardants are widely used in standard and engineering plastics, polyurethane foams, thermosets, coatings, and textiles. Phosphate esters are mainly used in engineering plastics, phenolic resins and coatings. Ammonium polyphosphate compounds are primarily used in intumescent coatings but are also effective in rigid and flexible polyurethane foams and injection moulded polyolefins, in formulations for unsaturated polyesters, phenolics, epoxies and coatings for textiles. Nitrogen based melamine cyanurate is used in nylon and in polypropylene intumescent formulations in conjunction with ammonium polyphosphate.

More Less

Product category: Fire protection agents

FR 5060

Chemical name: 2,2'-oxybis[5,5-dimethyl-1,3,2-dioxaphosphorinane] 2,2'-disulphide
CAS number: 4090-51-1
EC number: 223-829-1

Non-halogenated flame retardants (FR) are based on the elements phosphorus and nitrogen. The phosphoruscontaining flame retardants are widely used in standard and engineering plastics, polyurethane foams, thermosets, coatings, and textiles. Phosphate esters are mainly used in engineering plastics, phenolic resins and coatings. Ammonium polyphosphate compounds are primarily used in intumescent coatings but are also effective in rigid and flexible polyurethane foams and injection moulded polyolefins, in formulations for unsaturated polyesters, phenolics, epoxies and coatings for textiles. Nitrogen based melamine cyanurate is used in nylon and in polypropylene intumescent formulations in conjunction with ammonium polyphosphate.

More Less

Product category: Fire protection agents

HPCTP

Chemical name: hexaphenoxycyclotriphosphazene
CAS number: 1184-10-7

Non-halogenated flame retardants (FR) are based on the elements phosphorus and nitrogen. The phosphoruscontaining flame retardants are widely used in standard and engineering plastics, polyurethane foams, thermosets, coatings, and textiles. Phosphate esters are mainly used in engineering plastics, phenolic resins and coatings. Ammonium polyphosphate compounds are primarily used in intumescent coatings but are also effective in rigid and flexible polyurethane foams and injection moulded polyolefins, in formulations for unsaturated polyesters, phenolics, epoxies and coatings for textiles. Nitrogen based melamine cyanurate is used in nylon and in polypropylene intumescent formulations in conjunction with ammonium polyphosphate.

More Less

Product category: Fire protection agents

MCA (8 / 15 / 25 / 50)

Chemical name: Melamine Cyanurate
Synonym: 1,2,5-triazine-2,4,6 (1H,3H,5H)-trione, compound with 1,3,5 triazine- 2,4,6 triamine (1:1)
CAS number: 37640-57-6
EC number: 253-575-7

Non-halogenated flame retardants (FR) are based on the elements phosphorus and nitrogen. The phosphoruscontaining flame retardants are widely used in standard and engineering plastics, polyurethane foams, thermosets, coatings, and textiles. Phosphate esters are mainly used in engineering plastics, phenolic resins and coatings. Ammonium polyphosphate compounds are primarily used in intumescent coatings but are also effective in rigid and flexible polyurethane foams and injection moulded polyolefins, in formulations for unsaturated polyesters, phenolics, epoxies and coatings for textiles. Nitrogen based melamine cyanurate is used in nylon and in polypropylene intumescent formulations in conjunction with ammonium polyphosphate.

More Less

Product category: Peroxides

BIPB 40 / 96

Chemical name: Di-(Tert.Butyl Peroxy Isopropyl) benzene
CAS number: 25155-25-3

Organic peroxides find numerous applications. They serve as accelerators, activators, cross-linking agents, curing and vulcanization agents, hardeners, polymerisation initiators, and promoters in. Drying oils, found in many paints and varnishes, function via the formation of hydro peroxides.

More Less

Product category: Peroxides

BPO 20 / 50 / 75

Chemical name: dibenzoyl peroxide
Synonym: benzoylperoxide
CAS number: 94-36-0
EC number: 202-327-6

Organic peroxides find numerous applications. They serve as accelerators, activators, cross-linking agents, curing and vulcanization agents, hardeners, polymerisation initiators, and promoters in. Drying oils, found in many paints and varnishes, function via the formation of hydro peroxides.

More Less

Product category: Peroxides

DCP 40 / 99

Chemical name: Di-Cumyl-Peroxide
CAS number: 80-43-3

Organic peroxides find numerous applications. They serve as accelerators, activators, cross-linking agents, curing and vulcanization agents, hardeners, polymerisation initiators, and promoters in. Drying oils, found in many paints and varnishes, function via the formation of hydro peroxides.

More Less

Product category: Peroxides

DDB 30

Chemical name: 2,3-dimethy-2,3-diphenylbutane
CAS number: 1889-67-4

Organic peroxides find numerous applications. They serve as accelerators, activators, cross-linking agents, curing and vulcanization agents, hardeners, polymerisation initiators, and promoters in. Drying oils, found in many paints and varnishes, function via the formation of hydro peroxides.

More Less

Product category: Peroxides

DIHP 55 / 60 / 70 / 80

Chemical name: diisopropylbenzene hydroperoxide
CAS number: 26762-93-6

Organic peroxides find numerous applications. They serve as accelerators, activators, cross-linking agents, curing and vulcanization agents, hardeners, polymerisation initiators, and promoters in. Drying oils, found in many paints and varnishes, function via the formation of hydro peroxides.

More Less

Product category: Peroxides

PMHP 55

Chemical name: Para-Menthane-Hydro-Peroxide
CAS number: 80-47-7

Organic peroxides find numerous applications. They serve as accelerators, activators, cross-linking agents, curing and vulcanization agents, hardeners, polymerisation initiators, and promoters in. Drying oils, found in many paints and varnishes, function via the formation of hydro peroxides.

More Less

Product category: Peroxides

TAEC 94 (131)

Chemical name: Tert-Amyl Peroxy-2-Ethyl Hexyl Carbonate
CAS number: 70833-40-8

Organic peroxides find numerous applications. They serve as accelerators, activators, cross-linking agents, curing and vulcanization agents, hardeners, polymerisation initiators, and promoters in. Drying oils, found in many paints and varnishes, function via the formation of hydro peroxides.

More Less

Product category: Peroxides

TBEC 95 (117)

Chemical name: Tert-Butyl-Peroxy-2-Ethyl Hexyl Carbonate
CAS number: 34443-12-4

Organic peroxides find numerous applications. They serve as accelerators, activators, cross-linking agents, curing and vulcanization agents, hardeners, polymerisation initiators, and promoters in. Drying oils, found in many paints and varnishes, function via the formation of hydro peroxides.

More Less

About us

Company details

MPI is an independent chemical company from Dutch origin, with a global presence, dating back to the early 70's. By incorporating several production facilities, MPI is able to supply a wide range of products, which are used as performance-enhancing additives within the plastics and coatings industries. Through its office in the Netherlands and multiple warehouses in the Benelux, the focus is especially on the European market. MPI is thereby fully committed to become and remain a reliable long-term business partner, by continuing to offer competitive prices combined with the best possible service.

Originating from an Amsterdam-based trading house, MPI was established in the Dutch town of Houten in 1992. By strategic investments in manufacturing facilities in Europe and Asia, MPI obtained a continuous supply of high-quality materials at competitive prices. As a result, MPI quickly became synonymous for cost-efficiency within the European plastics and coatings industries.

By joining forces, MPI creates opportunities for effective communication between Asian additive producers and European end-users. An improved understanding of the market requirements and the technical capabilities results in a close cooperation during the development of existing and new additives, as well as end-products.

The integration of production sites in Asia with the existing warehousing and logistical hub in the Benelux ensures cost-saving as well as stability of supply, for additives that are essential to many plastics and coatings. This will prove to be beneficial to converters, compounders, masterbatch-, film-, sheet-, resin, adhesive-, sealant-, and paint-producers, from small regional companies to multinationals.

MPI is recognized by its numerous customers as a reliable supplier and will always think ahead in its customers' interest. Safety stocks are maintained, enabling supply within a couple of days across the European continent. This has a positive effect on the cash-flow position and storage capacity of customers. MPI strives to deliver products at competitive prices, while offering flexibility and an excellent 'round the clock' service to its customers. This vision defines MPI and supports its business principles, as it strives to develop solid and long-term relations with business partners.

All substances that are supplied by MPI, which are manufactured in Europe or imported into Europe, have been successfully registered according to the REACH Regulation and comply with the requirements of other relevant European Regulations and Directives. On all matters relating to REACH, as well as other relevant regulations and directives, MPI closely cooperates with its customers and assist them where needed.

MPI offers UV absorbers, light stabilizers, flame retardants, antioxidants, organic peroxides and optical brighteners.

In case of any request or comment regarding a specific product or any of the mentioned information, please don’t hesitate to get in touch.

More Less

Company data

Sales volume

20 - 100 Mill. US $

Number of employees

11 - 30

Foundation

1992

Area of business

Raw materials, auxiliaries

Target groups
  • Plastic product manufacturing
  • Chemical industry
  • Rubber manufacturing / processing

Company information as a PDF file