GIPLAST SYSTEMS SRL of Gornate Olona (Varese) at K 2019 in Düsseldorf -- K Trade Fair

GIPLAST SYSTEMS SRL

Via delle Industrie, 4, 21040 Gornate Olona (Varese)
Italy
Telephone +39 0331 820046
Fax +39 0331 820064
info@giplastsys.com

Hall map

K 2019 hall map (Hall 7): stand B10

Fairground map

K 2019 fairground map: Hall 7

Our range of products

Product categories

  • 02  Semi-finished products, technical parts and reinforced plastics
  • 02.04  Product groups
  • 02.04.001  Semi finished products
  • 02.04.001.04  Semi finished products of polycarbonate (PC)

Our products

Product category: Semi finished products of polycarbonate (PC)

Toplight

TOPLIGHT sheets are solid corrugated polycarbonate sheets with coextruded UV protection on the outer side, is an ideal product for industrial application, in combination with the main metal corrugated sheets or sandwich panels available on the market, as well as suitable for wall and roof applications in greenhouses.

More Less

Product category: Semi finished products of polycarbonate (PC)

Light

 
 LIGHT sheets are multiwall corrugated sheets 2,5 mm thickness.
This product is extremely adaptable because it can used in the middle of the roof, in ridge to gutter applications and/or in side overlap with most metal corrugated sheets or sandwich panels currently available on the market.
The multiwall structure of these sheets offers many advantages in terms of thermal insulation, limited condensation formation (compared to the same solid corrugated polycarbonate shapes), robustness and load resistance.

More Less

Applications
Exterior

Target Products
Film/Sheet, Colored, Solid

Product category: Semi finished products of polycarbonate (PC)

Wall

 WALL is a tongue&groove modular system, 500 mm width, available in 6-walls structure (thickness 16-20-25-30 mm) and double X and MonoX structure (40 mm). The thermal transmittance values of the different versions allow to meet the actual requirements required by current regulations.
This is the ideal product for the construction of vertical walls in industrial buildings and thanks to the complete range of accessories (aluminum perimeter profiles, gaskets, fixing hooks, …) it enables a simple, fast and technically effective installation.

More Less

Product category: Semi finished products of polycarbonate (PC)

Revers

 
REVERS is an innovative modular polycarbonate system that allows the realization of roofs and vertical walls thanks to joining profile connecting the panels to each other.

These joining profiles can be made of polycarbonate, to achieve maximum transparency of the solution without visible visual interruption, or aluminum, to ensure greater load resistance.

The interlocking joning system between the panel and the profile, without any fixing through the polycarbonate, allows also:

- to reduce the typical noise of polycarbonate systems when elements expad / shrink due to temperature variations
- install solutions with considerable lengths of panels without risk of breakage at the fixing points.

More Less

Product category: Semi finished products of polycarbonate (PC)

System

SYSTEM is an extremely versatile system suitable for application on different types of curved roofings even with big dimensions.

The advanced extrusion technology allows to  SYSTEM panels to guarantee perfect waterproofness and high resistance to wind and snow loads.

The panel provides excellent light transmission while the coextruded UV protection on the external layer keeps the physical and mechanical characteristics of the panels unchanged over time.
It is resistant to accidental shocks and adverse weather conditions (temperature variations, hail, …).

More Less

Product category: Semi finished products of polycarbonate (PC)

Ceiling


 CEILING modular panels are mainly installed as false ceilings in industrial buildings. The various thicknesses available (from 16 mm to 30 mm) and the innovative 6-walls structure allow to comply with the thermal transmittance values required by current laws. The false ceiling made with  CEILING, coupled with  GRECA,  LIGHT or TOPLIGHT sheets, allows to further improve the thermal insulation values. All  CEILING panels are supplied without any UV protection because they are installed in solutions where the product isn’t exposed to direct sunlight and snow / wind.

More Less

Applications
Building, Insulation

Target Products
Film/Sheet, Colored, Solid

Product category: Semi finished products of polycarbonate (PC)

Covertech


  COVERTECH panels are designed to facilitate the installation of skylights into the most common insulated panels on the market. The different thicknesses available (25 mm – 30 mm – 40 mm) make the system adaptable to most panel thicknesses, providing good thermal insulation and light transmission. It is possible to make skylights even on long slopes by carefully verifying the required expansion spaces.

More Less

Applications
Insulation

Target Products
Film/Sheet, Profile, Transparent, Solid

Product category: Semi finished products of polycarbonate (PC)

Greca

 GRECA are polycarbonate multiwall corrugated sheets with an honeycomb structure and a cover width of 1000 mm. Sheets have been developed for lateral overlaps to most insulated panels and / or corrugated metal sheets available on the market. Designed for the installation of skylights both in single and multiple applications, thanks to the possibility of longitudinal and / or lateral overlapping, they are also available in thermocurved version (except  GRECA 250/75), with bending radii of 3500 mm or 6000 mm.

The side wing has a multiwall structure to reduce the problem of condensation.  GRECA sheets have a good light transmission and, thanks to their coextruded UV protection, they guarantee a high degree of protection against UV rays, yellowing and hail damage. The corrugated shape provides good resistance to external loads (snow and / or wind), while the typical polycarbonate features provide excellent resistance to accidental shocks and temperature leaps.

More Less

Applications
Exterior

Target Products
Film/Sheet, Transparent, Solid

Product category: Semi finished products of polycarbonate (PC)

Onda

 ONDA are polycarbonate multiwall corrugated sheets extruded following the European standard 177/51. The possibility to produce sheets in different widths (5 ½ waves, 6 ½ waves and 7 waves) allows various overlapping solutions to solve the many issues regarding industrial roofing. They can also be cold bent with 3500 mm radius. The corrugated structure of the product provides good load resistance, while high resistance to aging and yellowing, good impact resistance and hail is guaranteed by coextruded UV protection.

More Less

Product category: Semi finished products of polycarbonate (PC)

Radius 1000

 RADIUS is an extruded multiwall polycarbonate panel produced already curved, with a 5-walls structure and a uniform thickness of 20 mm throughout the arch. Its special shape, OBTAINED DURING THE EXTRUSION PROCESS, allows it to have a particularly strong structure. These features make  RADIUS a unique system, ensuring:

- high load resistance
- good thermal insulation (uniform throughout the arch)
- no limits due to thermal expansion movements because there isn’t any fixing screw passing through polycarbonate
- possibility of extruding the sheet in one element, ensuring perfect air/water-tightness
- a uniform surface throughout the length of the skylight, without the typical interruption of modular systems or aluminium profiles used with multiwall sheets
 RADIUS is UV-protected thanks to the coextrusion applied to the outside surface that makes the product resistant to weather, accidental shocks, temperature fluctuations and hail. This innovative system allows a faster installation if compared with the classic solutions used today.

More Less

About us

Company details

GI PLAST SYSTEMS SRL , leading company in the Polycarbonate technology solutions, resistant and bright, for a constantly evolving construction industry.

More Less

Company information as a PDF file