Polyvel B.V.
Prumelaan 21,
6824 HP
Arnhem
Netherlands
Netherlands
This company is co-exhibitor of
DuFor Resins B.V.
Location
Hall map
Fairground map
Our range of products
Product categories
- 01 Raw materials, auxiliaries
- 01.01 Thermoplastics
- 01.01.050 Polyamide PA 06
Polyamide PA 06
- 01 Raw materials, auxiliaries
- 01.01 Thermoplastics
- 01.01.054 Polyamide PA 66
Polyamide PA 66
- 01 Raw materials, auxiliaries
- 01.01 Thermoplastics
- 01.01.064 Polybutylene terephthalate (PBT)
Polybutylene terephthalate (PBT)
- 01 Raw materials, auxiliaries
- 01.01 Thermoplastics
- 01.01.070 Polyetheretherketone (PEEK)
Polyetheretherketone (PEEK)
- 01 Raw materials, auxiliaries
- 01.01 Thermoplastics
- 01.01.071 Polyetherimide (PEI)
Polyetherimide (PEI)
- 01 Raw materials, auxiliaries
- 01.01 Thermoplastics
- 01.01.073 Polyethersulfone (PES, PESU)
Polyethersulfone (PES, PESU)
- 01 Raw materials, auxiliaries
- 01.01 Thermoplastics
- 01.01.092 Polyphenylene sulfide (PPS)
Polyphenylene sulfide (PPS)
- 01 Raw materials, auxiliaries
- 01.01 Thermoplastics
- 01.01.096 Polysulfone (PSU)
Polysulfone (PSU)
- 01 Raw materials, auxiliaries
- 01.02 Thermoplastic elastomers
- 01.02.016 Other thermoplastic elastomers
Other thermoplastic elastomers
- 01 Raw materials, auxiliaries
- 01.06 Synthetic fibres, bristels, tapes
- 01.06.002 Aramide fibres
Aramide fibres
- 01 Raw materials, auxiliaries
- 01.12 Reinforcing fibres, -materials
- 01.12.001 Aramide fibres
Aramide fibres
- 01 Raw materials, auxiliaries
- 01.12 Reinforcing fibres, -materials
- 01.12.011 Carbon fibres (CF)
Carbon fibres (CF)
Our products
Product category: Polyamide PA 66
Polyamide 6.6 Polymer Chips V2.45
Material : Polyamide 6.6
Material-Type : Visco 2.45
Material-No. : 122101 / 140327
Rel. Density : 1.14
Rel. Viscosity : 2.45 ± 0.05 *
Melting Point : ~ 256 °C
Humidity at Packing : max. 0.1 % **
M50 : approx. 1.4 gram per 50 chips
Chips Size : approx. 3.4 x 4.9 x 3.1 mm
Additives : none
Yellow Index : max. 0 ***
* Measured in 89.75 % formic acid
(the viscosity indicated corresponds to approx. 2.84 ± 0.05, when measured in H2SO4)
** KF method
*** B value Datacolor measurement
Material-Type : Visco 2.45
Material-No. : 122101 / 140327
Rel. Density : 1.14
Rel. Viscosity : 2.45 ± 0.05 *
Melting Point : ~ 256 °C
Humidity at Packing : max. 0.1 % **
M50 : approx. 1.4 gram per 50 chips
Chips Size : approx. 3.4 x 4.9 x 3.1 mm
Additives : none
Yellow Index : max. 0 ***
* Measured in 89.75 % formic acid
(the viscosity indicated corresponds to approx. 2.84 ± 0.05, when measured in H2SO4)
** KF method
*** B value Datacolor measurement
Product category: Polyamide PA 66
Polyamide 6.6 Polymer Chips V2.70
Material : Polyamide 6.6
Material-Type : Visco 2.70
Material-No. : 115820
Rel. Density : 1.14
Rel. Viscosity : 2.70 ± 0.07 *
Melting Point : ~ 256 °C
Humidity at Packing : max. 0.05 % **
M50 : approx. 1.4 gram per 50 chips
Chips Size : approx. 3.4 x 4.9 x 3.1 mm
Additives : none
Yellow Index : max. 1.5 ***
* Measured in 89.75 % formic acid
(the viscosity indicated corresponds to approx. 2.84 ± 0.05, when measured in H2SO4)
** KF method
*** B value Datacolor measurement
Material-Type : Visco 2.70
Material-No. : 115820
Rel. Density : 1.14
Rel. Viscosity : 2.70 ± 0.07 *
Melting Point : ~ 256 °C
Humidity at Packing : max. 0.05 % **
M50 : approx. 1.4 gram per 50 chips
Chips Size : approx. 3.4 x 4.9 x 3.1 mm
Additives : none
Yellow Index : max. 1.5 ***
* Measured in 89.75 % formic acid
(the viscosity indicated corresponds to approx. 2.84 ± 0.05, when measured in H2SO4)
** KF method
*** B value Datacolor measurement
Product category: Polyamide PA 66
Polyamide 6.6 Polymer Chips V4.0
Material : Polyamide 6.6
Material-Type : Visco 4.0
Rel. Density : 1.14
Rel. Viscosity : 4.00 ± 0.2 *
Melting Point : ~ 256 °C
Humidity : < 0.03 % **
M50 : approx. 1.4 gram per 50 chips
Chips Size : approx. 3.4 x 4.9 x 3.1 mm
Yellow Index : max. 5.0 ***
* Measured in 89.75 % formic acid.
** KF method
*** B value Datacolor measurement
Material-Type : Visco 4.0
Rel. Density : 1.14
Rel. Viscosity : 4.00 ± 0.2 *
Melting Point : ~ 256 °C
Humidity : < 0.03 % **
M50 : approx. 1.4 gram per 50 chips
Chips Size : approx. 3.4 x 4.9 x 3.1 mm
Yellow Index : max. 5.0 ***
* Measured in 89.75 % formic acid.
** KF method
*** B value Datacolor measurement
Product category: Other thermoplastic elastomers
Thermoplastic Elastomers
From the Far East we import TPE-E. We supply from our warehouse in the Netherlands.
Thermoplastic PolyEstherElastomers are mainly used in the following production processes:
Standard grades:
Kopel KP3340 - shore D 40
Kopel KP3355 - shore D 55
Kopel KP3363 - shore D 63
Kopel KP3372 - shore D 72
More types are available on request
Thermoplastic PolyEstherElastomers are mainly used in the following production processes:
- injection moulding
- extrusion
Standard grades:
Kopel KP3340 - shore D 40
Kopel KP3355 - shore D 55
Kopel KP3363 - shore D 63
Kopel KP3372 - shore D 72
More types are available on request
Product category: Aramide fibres
Milled Aramid Fibres
In 2013 Polyvel started selling milled para-aramid fibres. We can offer a range of milled and staple fibers all based on 100% recycled para-aramid fibres, with different fibre lengths as well as different packaging. Para-aramid fibres are very fine fibers with a very high tenacity, are nonconductive, have a low flammability and have an excellent abrasion resistance. These fibres and fabric by-products can be recycled into:
Standard grades:
AF 25 G - milled para-aramid fibres for us in brake pads
AF 20/200 - milled para-aramid fibres free flow type for compounding
AF 20/1 G - milled para-aramid fibres for use in gaskets
AF 40~60 - staple para-aramid fibres with a fibre length of 40~60mm
PO - 300 - milled oxidized PAN fibres gaskets, brakelinings etc.
Moreover we can supply Milled Carbon Fibres, for more information please contact us
- a milled or pulped fibre with various fiber lengths, from 200 microns to 3mm
- staple fibre with a fibrelength of 40~60 mm for use in yarnspinning, nonwovens.
- gaskets
- brake lining
- thermoplastic compounds
Standard grades:
AF 25 G - milled para-aramid fibres for us in brake pads
AF 20/200 - milled para-aramid fibres free flow type for compounding
AF 20/1 G - milled para-aramid fibres for use in gaskets
AF 40~60 - staple para-aramid fibres with a fibre length of 40~60mm
PO - 300 - milled oxidized PAN fibres gaskets, brakelinings etc.
Moreover we can supply Milled Carbon Fibres, for more information please contact us
About us
Company details
Polyvel bv is a trading company in the eastern part of The Netherlands, near the German border. We buy and sell a wide range of engineering plastics, especially polyamide 66 and polyamide 6, PBT, TPE-E and milled aramid fibres. We operate worldwide, mainly in Europe and the Far East.
History
After 30 years of sales experience in engineering plastics at Akzo Plastics and DSM, Mr Sybrand R. Siezen founded Polyvel in 1996. Mr Ewoud J. Siezen joined the company in 2001.
We have been working with several principals and partners in the last 15 years, so we gained a lot of experience in many different market segments. Recently we started selling recycled para-aramid milled fibers.
Vision
A lot has happened in the plastic industry since 1996. Companies were sold, familiar names disappeared and many new companies were created. This continuous process makes it necessary for us to stay alert and well informed, in order to serve our relations and to find new opportunities. Polyvel considers this challenge as the engine of her activities.
History
After 30 years of sales experience in engineering plastics at Akzo Plastics and DSM, Mr Sybrand R. Siezen founded Polyvel in 1996. Mr Ewoud J. Siezen joined the company in 2001.
We have been working with several principals and partners in the last 15 years, so we gained a lot of experience in many different market segments. Recently we started selling recycled para-aramid milled fibers.
Vision
A lot has happened in the plastic industry since 1996. Companies were sold, familiar names disappeared and many new companies were created. This continuous process makes it necessary for us to stay alert and well informed, in order to serve our relations and to find new opportunities. Polyvel considers this challenge as the engine of her activities.