Product category: Gravimetric dosing and metering equipment
Gravimetric dosing system – Trio T
TRIO-T is an equipment used to process homogeneus blends of plastic and natural materials, such as pellets and grinded. This is made possible by the gravimetric dosage of each single component.
OPERATION In the gravimetric dosing system TRIO-T the operation cycle starts from the gravimetric dosage of the materials with the reading of the weight in a sequential procedure, made by a balance supported by high-resolution load cells. The weighed materials are succesively blended in a mixer specifically studied for guarantee an homogeneus blend suitable for making the next process possible. A high-performance microprocessor controls the process.
APPLICATION TRIO-T is a versatile equipment which can be directly installed above the process machine in replacement of the feeding hopper, or on the ground to feed other machines.
ADVANTAGES INTUITIVE, the graphic interface of the control panel enables a quick and practical learning for the user PRECISE, the dosage is constant, regardless of the particle size and of variations in the behavior of materials during the time MODULAR, the latest generation electronics enables the alignmentit to each single process machine ECONOMIC, thanks to the reduction in waste of raw material COMPACT, the innovative design gives an harmonious aspect maintaining a limited size
OPERATION The stainless steel body is equipped with an automatic cleaning filter through compressed air. The entire working cycle is controlled by an electronic card wich provides also a light signaling in case of lack of material. All models are predisposed for the application of a proportional valve.
Since when, in 1975, Engin Plast was founded, our mission has always been focused on creating innovative and customized solutions capable of ensuring a lasting and tangible benefit. We are in the business of plastic technology: dispensing, monitoring, recovery and transport of plastic and not plastic materials.
Today we represent a reference as designer and manufacturer of metering and transport systems (for powders, granules and grinded material) and granulators with low environmental impact. From natural inclination to seek customized solutions, in order to ensure a correct response to the needs expressed, we have refined a highly specialized technical and commercial knowledge.
We are tenacious in pursuing a goal that is common throughout the business world: great products minimum cost. The research facilitates the achievement of this objective and benefits also have an impact on the environment, with technologically advanced solutions and energy efficient