Fleron Automation AB
P.O. Box 72,
331 72
Forsheda
Ljungvägen, 331 71 Forsheda
Sweden
Ljungvägen, 331 71 Forsheda
Sweden
Location
Hall map
Fairground map
Our range of products
Product categories
- 03 Machinery and equipment for the plastics and rubber industries
- 03.03 Post processing machines and downstream equipment
- 03.03.004 Cutting machines
Our products
Product category: Cutting machines
Rotary Cutter - FA 429 ACS-G
for precision cutting of hoses and profiles in rubber.
FA 429 ACS-G
is recommend for cutting soft and semi-rigid materials. The machine has very high power, precision and capacity. Cutting takes place during continuous feeding of the profile. The machine is in all important parts, including the entire front, manufactured in stainless steel.
FA 429 ACS-G
is a flexible and mobile rotary cutter. ACS-G is our HD (heavy-duty) – model, where the servomotor is speed-reduced with a
planetary gearbox. The knife is directly mounted on the output shaft of the gearbox, which means that the power-loss become
minimal.
The feeding of profile is done between dual driven high-friction belts. Electrical settings for each belt. The position of the lower
belt and the distance between the belts are done with absolute multiturn encoders and is shown on a separate display. The upper feeding belt has a pneumatic pressure/ lift automatics.
End product conveyor with adjustable belt speed which can be synchronised with the feed speed of the machine.
All settings are easily and logically made in an operators keypad. Quick adjustments of cutting lengths as well as menus for
setting, water spraying system, maintenance, production-data, etc., are always easy to find.
FA 429 ACS-G
is provided with adjustable holders for rapid change guide bushings, dual closed water spraying systems, automatic trimming
during feed-in, etc. The machine can be installed directly in an extruder-line in combination with our loop-control or to be used in a separate cutting-line.
Prefeeders, decoiling equipment, synchronising equipment and end product conveyors can also be supplied from the Fleron
product-range
FA 429 ACS-G
is recommend for cutting soft and semi-rigid materials. The machine has very high power, precision and capacity. Cutting takes place during continuous feeding of the profile. The machine is in all important parts, including the entire front, manufactured in stainless steel.
FA 429 ACS-G
is a flexible and mobile rotary cutter. ACS-G is our HD (heavy-duty) – model, where the servomotor is speed-reduced with a
planetary gearbox. The knife is directly mounted on the output shaft of the gearbox, which means that the power-loss become
minimal.
The feeding of profile is done between dual driven high-friction belts. Electrical settings for each belt. The position of the lower
belt and the distance between the belts are done with absolute multiturn encoders and is shown on a separate display. The upper feeding belt has a pneumatic pressure/ lift automatics.
End product conveyor with adjustable belt speed which can be synchronised with the feed speed of the machine.
All settings are easily and logically made in an operators keypad. Quick adjustments of cutting lengths as well as menus for
setting, water spraying system, maintenance, production-data, etc., are always easy to find.
FA 429 ACS-G
is provided with adjustable holders for rapid change guide bushings, dual closed water spraying systems, automatic trimming
during feed-in, etc. The machine can be installed directly in an extruder-line in combination with our loop-control or to be used in a separate cutting-line.
Prefeeders, decoiling equipment, synchronising equipment and end product conveyors can also be supplied from the Fleron
product-range
Product category: Cutting machines
Travelling hydraulic cutting machine - FA KM 125
FA – KM 125
is recommended for cutting rigid profiles, which can be fed through the machine by an existing extruder haul-off. The knife is pressed through the profile with a hydraulic cylinder and the machine is cutting with extremely high cutting power and accuracy.
FA – KM 125
is a sturdy mechanical design, where the length- and speed-measuring is done with an external measuringwheel/encoder placed in connection with an existing haul-off. The complete cutting head is travelling and driven by a servomotor. No clamping of the profile is necessary for the travelling function.
The knife is guided between two tool plates and moves upwards, sideways and back, when cutting. Fitted insert bushings guides the profile on both sides of the knife.
FA – KM 125
has tool-holders for exchangeable insert bushings. The machine has self adjusting hydraulic system, adjustable hydraulic control of the knife speed and absolute encoder for measuring the knife position. It is provided with output signal for quick stop of external equipment (the haul-off) and also output signal for quantity reached (for following equipment, for instance a packing machine).
All settings are easily and logically done in an operators panel. Quick adjustments of cutting lengths as well as menus for quantity, maintenance, production-information, etc. are always at hand.
is recommended for cutting rigid profiles, which can be fed through the machine by an existing extruder haul-off. The knife is pressed through the profile with a hydraulic cylinder and the machine is cutting with extremely high cutting power and accuracy.
FA – KM 125
is a sturdy mechanical design, where the length- and speed-measuring is done with an external measuringwheel/encoder placed in connection with an existing haul-off. The complete cutting head is travelling and driven by a servomotor. No clamping of the profile is necessary for the travelling function.
The knife is guided between two tool plates and moves upwards, sideways and back, when cutting. Fitted insert bushings guides the profile on both sides of the knife.
FA – KM 125
has tool-holders for exchangeable insert bushings. The machine has self adjusting hydraulic system, adjustable hydraulic control of the knife speed and absolute encoder for measuring the knife position. It is provided with output signal for quick stop of external equipment (the haul-off) and also output signal for quantity reached (for following equipment, for instance a packing machine).
All settings are easily and logically done in an operators panel. Quick adjustments of cutting lengths as well as menus for quantity, maintenance, production-information, etc. are always at hand.
About us
Company details
Fleron Automation AB
offer standard and specially adapted machines for rotary and punch cutting of hose and profiles, in plastic or rubber. These machines are primarily used in the extrusion industry for cutting products to their finished length in the production line. As well as cutting prefabricated material from coils. Our machines ars used where high demands on length-tolerance and cut surface of the products are being requested.
Fleron Automation AB is a well-renowned company with over 40 years in the industry. Equipments from Fleron are known for their reliability, accuracy and low operating costs. Our R&D-department has a high priority to continuously develope and improve performance of the Fleron machines.
offer standard and specially adapted machines for rotary and punch cutting of hose and profiles, in plastic or rubber. These machines are primarily used in the extrusion industry for cutting products to their finished length in the production line. As well as cutting prefabricated material from coils. Our machines ars used where high demands on length-tolerance and cut surface of the products are being requested.
Fleron Automation AB is a well-renowned company with over 40 years in the industry. Equipments from Fleron are known for their reliability, accuracy and low operating costs. Our R&D-department has a high priority to continuously develope and improve performance of the Fleron machines.