Borch Machinery Co., Ltd.
No. 9 Xinxiang Rd., Zengcheng Economic, & Technological Development District,
511340
Guangzhou City
China
China
Telephone +86 20 32878035
Fax +86 20 32878036
sales@borch-machinery.com
http://www.borch-machinery.com
Fax +86 20 32878036
sales@borch-machinery.com
http://www.borch-machinery.com
Location
Hall map
Fairground map
Our range of products
Product categories
- 03 Machinery and equipment for the plastics and rubber industries
- 03.02 Machinery and plant for processing
- 03.02.002 Injection moulding machines
- 03.02.002.01 Injection moulding machines, general purpose
- 03.02.002.01.04 Injection moulding machines above 4000 kN to 10000 kN clamping force
Injection moulding machines above 4000 kN to 10000 kN clamping force
Our products
Product category: Injection moulding machines above 4000 kN to 10000 kN clamping force
Intelligent Two-Platen series
Bu Series Introduction
Borche owns the most patents related to two-platen IMM in China
With clamping force up to 6800T
Wide daylight and big mold thickness, especially suitable for parts with deep cavity
Technology originated from Europe, developed by European and Chinese R&D team together
Fit for production of extra size plastic parts used in Aerospace, automobile, utilities and environment filed, home appliance, housewares, logistics & transportation, etc.
Specially suitable for low pressure injection and compression injection and vent injection
Borche owns the most patents related to two-platen IMM in China
With clamping force up to 6800T
Wide daylight and big mold thickness, especially suitable for parts with deep cavity
Technology originated from Europe, developed by European and Chinese R&D team together
Fit for production of extra size plastic parts used in Aerospace, automobile, utilities and environment filed, home appliance, housewares, logistics & transportation, etc.
Specially suitable for low pressure injection and compression injection and vent injection
Product category: Injection moulding machines above 4000 kN to 10000 kN clamping force
BH High speed series
Patent:
design of toggle direct clamping: Toggle gets straight when mold closing,then clamping is done through pulling tie-bar by 4 booster cylinder on fixedplaten.
Advantages: precise, clean, and efficient
Dry cycle: BH150-200：≤2.2s；BH260-320：≤2.7s；BH400-500：≤3.2s
Standard feature:
1、Patent design of toggle direct clamping with hi-speed proportional valve for mold opening/closing, position difference of repeated molding opening less than0.5mm
2、 Patent single cylinder injection unit, more precise injection and faster response
3、 Parallel plasticization during mold opening, thanks to duo servo motor system, shortens cycle time
4、 Independent digital back pressure control
5、 No oil contaminant on mold and parts outgoing area, suitable for clean production requirements
6、High power oil cooler controls the oil temperature
7、Special design of stationary and moving platen with high stiffness
8、 No-contact transducer brings fast response and high precision and long life
9、 Keba controller
10、Linear guide for platen moving, higher precision and faster response
11、Nano infrared heater band with low thermal inertia yields precise temperature control, higher efficiency of heating and transmission, saves energy of 20%-40%.
12、Theoretic injection speed: 200-300mm/s
13、Special barrel/screw for high plasticization
Optional features：
1、Hybrid injection unit available, which can have parallel plasticization during mold opening/closing, and shorten the cycle time to increase efficiency
2、Plasticizing static mixer available, which can improve color mixing.
3、Parallel ejection during mold opening available
design of toggle direct clamping: Toggle gets straight when mold closing,then clamping is done through pulling tie-bar by 4 booster cylinder on fixedplaten.
Advantages: precise, clean, and efficient
Dry cycle: BH150-200：≤2.2s；BH260-320：≤2.7s；BH400-500：≤3.2s
Standard feature:
1、Patent design of toggle direct clamping with hi-speed proportional valve for mold opening/closing, position difference of repeated molding opening less than0.5mm
2、 Patent single cylinder injection unit, more precise injection and faster response
3、 Parallel plasticization during mold opening, thanks to duo servo motor system, shortens cycle time
4、 Independent digital back pressure control
5、 No oil contaminant on mold and parts outgoing area, suitable for clean production requirements
6、High power oil cooler controls the oil temperature
7、Special design of stationary and moving platen with high stiffness
8、 No-contact transducer brings fast response and high precision and long life
9、 Keba controller
10、Linear guide for platen moving, higher precision and faster response
11、Nano infrared heater band with low thermal inertia yields precise temperature control, higher efficiency of heating and transmission, saves energy of 20%-40%.
12、Theoretic injection speed: 200-300mm/s
13、Special barrel/screw for high plasticization
Optional features：
1、Hybrid injection unit available, which can have parallel plasticization during mold opening/closing, and shorten the cycle time to increase efficiency
2、Plasticizing static mixer available, which can improve color mixing.
3、Parallel ejection during mold opening available
Product category: Injection moulding machines above 4000 kN to 10000 kN clamping force
BS-III Servo Series
Machine structure is designed according to Ergonomics; the operation is more user friendly.
New design improve the stiffness of structure.
With hollow frame, suitable forfully automatic production system with 3-conveyers
Transparent front operation door, easy to watch the work of machine
Twin-carriage structure, better alignment and smoother injection
New design improve the stiffness of structure.
With hollow frame, suitable forfully automatic production system with 3-conveyers
Transparent front operation door, easy to watch the work of machine
Twin-carriage structure, better alignment and smoother injection
About us
Company details
EXPERT OF INTELLIGENT TWO-PLATEN IMM
Borch Machinery Co., LTD (Borche), established in 2002, specializes in self developing, manufacturing and selling intelligent injection molding machines (IMM). Now Borche has THREE manufacturing bases: Guangzhou headquarters with R&D and manufacturing base, Hangzhou plant and Guangzhou Intelligent manufacturing demonstration plant of Two- Platen machine. In total,Borche has premises of 215,000 square meters and has more than 800 employees.
As the fifth President Unit of China Plastics Machinery Industry Association (CPMIA), Borche has been firstly selected as Demonstration Unit of 46 Intelligent Manufacturing Program in 2005, and accredited as National Advanced Technology Enterprise of National Torch Program, Guangdong Plastic Machinery Engineering and Technology Center, Provincial level Enterprise Technology Center, postdoctoral scientific research station andnational management system certification of“Integration of Informationization and Industrialization”. In 2016, Borche has also been selected as a demonstration enterprise of National Intelligent Manufacturing New Model Program, the only enterprise in Guangzhou and the only enterprise in plastics machinery industry.
As the Manufacturer of Biggest Two Platen IMM in Asia, the Expert of Intelligent Two Platen IMM,Borche has developed EURO map intelligent two platen IMM BU series, fast precision IMM BH series, servo machine BS series and BM series multi-components IMM, which include more than 100 models. Machine clamping force ranges from 50T to 6800T, shot weight from 25g to 300Kgs.
Borch Machinery Co., LTD (Borche), established in 2002, specializes in self developing, manufacturing and selling intelligent injection molding machines (IMM). Now Borche has THREE manufacturing bases: Guangzhou headquarters with R&D and manufacturing base, Hangzhou plant and Guangzhou Intelligent manufacturing demonstration plant of Two- Platen machine. In total,Borche has premises of 215,000 square meters and has more than 800 employees.
As the fifth President Unit of China Plastics Machinery Industry Association (CPMIA), Borche has been firstly selected as Demonstration Unit of 46 Intelligent Manufacturing Program in 2005, and accredited as National Advanced Technology Enterprise of National Torch Program, Guangdong Plastic Machinery Engineering and Technology Center, Provincial level Enterprise Technology Center, postdoctoral scientific research station andnational management system certification of“Integration of Informationization and Industrialization”. In 2016, Borche has also been selected as a demonstration enterprise of National Intelligent Manufacturing New Model Program, the only enterprise in Guangzhou and the only enterprise in plastics machinery industry.
As the Manufacturer of Biggest Two Platen IMM in Asia, the Expert of Intelligent Two Platen IMM,Borche has developed EURO map intelligent two platen IMM BU series, fast precision IMM BH series, servo machine BS series and BM series multi-components IMM, which include more than 100 models. Machine clamping force ranges from 50T to 6800T, shot weight from 25g to 300Kgs.