Manage stand orders
Select Option
Stamixco AG Static Mixing Technology
Samstagernstr. 57,
8832
Wollerau
Switzerland
Switzerland
Location
Hall map
Fairground map
Our range of products
Product categories
- 03 Machinery and equipment for the plastics and rubber industries
- 03.01 Machines and equipment for preprocessing and recycling
- 03.01.001 Mixers
- 03.01.001.02 Mixers, continuous type, for liquids
Mixers, continuous type, for liquids
- 03 Machinery and equipment for the plastics and rubber industries
- 03.01 Machines and equipment for preprocessing and recycling
- 03.01.001 Mixers
- 03.01.001.05 Internal mixers
Internal mixers
- 03 Machinery and equipment for the plastics and rubber industries
- 03.01 Machines and equipment for preprocessing and recycling
- 03.01.008 Melt filters
Melt filters
- 03 Machinery and equipment for the plastics and rubber industries
- 03.10 Measuring and test equipment
- 03.10.004 Measuring and test equipment for thermal properties
Measuring and test equipment for thermal properties
Our products
Product category: Mixers, continuous type, for liquids
X Grid Static Mixer for lamina Flow applications
The GX static mixer has been used successfully for the laminar flow mixing and/or dispersion of viscous fluids for over 35 years. It is a high performance static mixer capable of mixing materials with equal or very large differences in viscosity and volumetric ratio. Mixing is accomplished in a short length with a very high degree of mixing.
Mixing Capabilities
Mixing Capabilities
- Mix fluids with similar viscosity
- Mix fluids with high and low viscosity (1 million : 1)
- Mix fluids with large differences in volumetric ratio (1,000 : 1)
- Disperse and mix polymers with blowing agents
- Thermal homogenization
- Viscosity homogenization
- Polymer manufacture and processing.
- Two (2) component viscous materials such as Liquid Silicone Rubber (LSR), adhesives, polysulfide, sealants, epoxy resins, polyurethanes, etc.
- Plastics ExtrusionMixing Capabilities
Product category: Melt filters
Extrusion Melt Blender Static Mixer
StaMixCo manufacturers all three commercially proven static mixer designs used for high viscous melt flow mixing of polymers in extrusion service. As with most process equipment, each static mixer design has specific advantages and disadvantages that make it more or less suitable for a specific application and installation. Each type of motionless mixer is discussed below:
Process Improvements:
Process Improvements:
- Temperature gradients are virtually eliminated.
- Viscosity gradients are virtually eliminated.
- Composition gradients of colorant, chemical additives, fillers and regrind are virtually eliminated.
- Stagnant polymer wall-creep material is incorporated into the bulk polymer stream.
Product category: Internal mixers, Mixers, continuous type, for liquids
Double-Roof Disk Static Mixer (Type GXR)
The GXR Static Mixer (Licensee of Bayer, AG) is used for mixing, dispersing and homogenization of viscous materials. It is a high performance motionless mixer design that creates a very high degree of mixing in a short length. It is capable of mixing materials with very large differences in viscosity and volumetric ratios.
Mixing Capabilities
Mixing Capabilities
- Mix fluids with similar viscosity
- Mix high and low viscosity fluids (1 million : 1)
- Mix fluids with large differences in volumetric ratio (1,000 : 1)
- Disperse and mix polymers with blowing agents
- Thermal homogenization
- Viscosity homogenization
About us
Company details
StaMixCo specializes in static mixers (motionless mixers with no moving parts) for laminar flow applications such as for the homogenization of polymer melts in plastics injection molding and extrusion equipment, mixing/dispersing in polymer production (similar viscosity and high/low viscosity materials).
We design and manufacture a wide variety of metal and plastic static mixers. Some designs are best suited for processing highly viscous polymer materials some for processing low viscosity materials in ozonation (and / or also special gas / liquid contracting operations).
Designs range from licensed patented products, own patented designs and industry standard designs that pioneered static mixing technology dating back to the late 1960’s.
We design and manufacture a wide variety of metal and plastic static mixers. Some designs are best suited for processing highly viscous polymer materials some for processing low viscosity materials in ozonation (and / or also special gas / liquid contracting operations).
Designs range from licensed patented products, own patented designs and industry standard designs that pioneered static mixing technology dating back to the late 1960’s.