ER-AL MAKINA YED. PAR. ÜRT. SAN. TIC. LTD. STI.
Fevzipasa Mah. Gülnar Sok. No: 2/2, Degirmenköy,
34586
Silivri
Turkey
Turkey
Location
Hall map
Fairground map
Our range of products
Our products
HTR-1
Double Shell with Spirals Passages - Mono Flow Rolls
- In this design, roll with inlet and outlet on opposite sides. The medium flows through the roll, one side in and one side out.
- It is most popular model
- Multi start degressive or constant Spiral Baffles Section
- Mono flow Fluid
- Medium : Cold or Hot Water, Thermal Oil,
- Minimum Pressure Drop and Temperature Variance, PERFECT temperature control
- Application : Extrusion, Laminating, Coating, Stretching, Polishing, Embossing, Calendering, special purpose to heating or cooling on the line...
HTR-2
Double Shell with Spirals Passages - Duo Flow Rolls
- Inlet and outlet of the medium on the same side. The medium flows in through a siphon pipe. After that follows spiral passages and out via same journal bore. (outer diameter of the siphon pipe.)
- Multi start degressive or constant Spiral Baffles Section
- Duoflow Fluid
- Medium : Cold or Hot Water, Thermal Oil
- Minimum Pressure Drop and Temperature Variance, very good temperature control
- Application : Extrusion, Laminating, Coating, Stretching, Polishing, Embossing, Calendering, special purpose to heating or cooling on the line...
HTR-3
Double Side, Double Shell with Spirals Passages - Duo Flow
- Inlet and outlet of the medium on the different side. The medium flows in through a siphon pipe from each side and after that follows spirall passages and out via different journal bore. (especially use for longer rolls to minimize pressure drop)
- Multi start Constant & Degressive Spiral Baffles section
- Duo flow Fluid
- Medium : Cold or Hot Water, Thermal Oil
- Minimum Pressure Drop and Temperature Variance, very good temperature control
- Application : Extrusion, Laminating, Coating, Stretching, Polishing, Embossing, Calendering, special purpose to heating or cooling on the line...
HTR-3
Double Side, Double Shell with Spirals Passages - Duo Flow
- Inlet and outlet of the medium on the different side. The medium flows in through a siphon pipe from each side and after that follows spirall passages and out via different journal bore. (especially use for longer rolls to minimize pressure drop)
- Multi start Constant & Degressive Spiral Baffles section
- Duo flow Fluid
- Medium : Cold or Hot Water, Thermal Oil
- Minimum Pressure Drop and Temperature Variance, very good temperature control
- Application : Extrusion, Laminating, Coating, Stretching, Polishing, Embossing, Calendering, special purpose to heating or cooling on the line...
HTR-6
Double Shell with Spiral Passages - Duo or Mono Flow Powered Hardened Rolls
- This roller especially use for calendering “smoothing” process. It has 55-60 HRC hardening on the body and enlarged wall thickness of the inner shell powered against for bending.
- The jacket raw material is DIN 42CrMo4 (ANSI4140) as a solid round bar. This pipe create from round bar with the deep drilling. It has serious heat treatment process. (tempering, stress relieving, induction) In generally use forplastic sheet/film line and rubber production industry. It is possible to produce as mono or duoflow. After machining they have some coating process. Mirror finish or Matt Chrome etc.
- Application : Extrusion, Laminating, Coating, Stretching, Polishing, Embossing, Calendering, hotmelt, special purpose to heating or cooling on the line...
About us
Company details
Eral Rollers has more than 30 years of experience in the machining industry. Beginning from 1995, the production of rollers is going on.
We succeeded to increase our customer portfolio in a very short period. By investing to the new technology and increasing the production capacity, we achieved to serve to the customers all over the word. As of today we are exporting to more than 13 countries from Europe, Asia, Arabic Peninsula, etc……
General Applications Area;
We succeeded to increase our customer portfolio in a very short period. By investing to the new technology and increasing the production capacity, we achieved to serve to the customers all over the word. As of today we are exporting to more than 13 countries from Europe, Asia, Arabic Peninsula, etc……
General Applications Area;
- Printing (Rotogravure, Flexo)
- Lamination
- Plastic (Extrusion, Sheet, Cast, Coating)
- Embossing
- Textile (Bleaching, Drying, Mercerizing, Printing etc.)
- Wood
- Heavy Industry