Marangon Danilo & C. S.r.l.
Via Pietro Micca, 3,
36075
Montecchio Maggiore (VI)
Italy
Italy
Location
Hall map
Fairground map
Our range of products
Product categories
- 03 Machinery and equipment for the plastics and rubber industries
- 03.06 Moulds and dies
- 03.06.004 Standard parts for moulds
Standard parts for moulds
Our products
Product category: Standard parts for moulds
Brass inserts for PE
Marangon Danilo & C produces brass inserts used in PE moulding with threads that range from 3/8” up to a maximum of 5”. Following the specifications of the client, and with the subsequent involvement of the company’s prototype team, made-to-measure fittings can be produced for any kind of need.
Target Products
Complex Geometry
Product category: Standard parts for moulds
Brass inserts for PPR
Marangon Danilo & C produces brass inserts used in PPR moulding for the transportation of cold and hot water; the inserts have a thread that goes from 3/8” to a maximum of 5”. Following the client’s specifications and with the involvement of the company prototypers and designers, we can produce made-to-measure fittings for each type of requirement
Target Products
Complex Geometry
Product category: Standard parts for moulds
Brass inserts for CPVC
Marangon Danilo & C produces brass inserts used in PE moulding with threads that range from 3/8” up to a maximum of 5”. Following the specifications of the client, and with the subsequent involvement of the company’s prototype team, made-to-measure fittings can be produced for any kind of requirement.
Target Products
Complex Geometry
Product category: Standard parts for moulds
Brass inserts for PPSU and PVDF
Marangon Danilo & C produces brass inserts used in PPSU and PVDF moulding for transporting hot and cold water. The inserts have threads that range from 3/8” up to a maximum of 5”. Following the specifications of the client, and with the subsequent involvement of the company’s prototype team, made-to-measure fittings can be produced for any kind of requirement.
Target Products
Complex Geometry
Product category: Standard parts for moulds
Brass inserts for filters
Marangon Danilo & C produces brass inserts used in water filter moulding with threads from 1/8” to 1 ½”. Following the specifications of the client, and with the subsequent involvement of the company’s prototype team, made-to-measure fittings can be produced for any kind of requirement.
Target Products
Complex Geometry
About us
Company details
Marangon is a company that started its life in north-east Italy, where genius and creativity contributed to the economic and human success of the people of the Veneto region. This spirit still feeds the will of the company to grow and improve day by day.
In 1961 Danilo Marangon opened the doors of a mechanical turnery that produced high precision pieces for the most varied sectors of use. In 1985, after intense activity and solid professionalism, the company was ready to specialise in the brass insert sector, and soon became a market reference point. The choice of working only with brass allowed Marangon to slim production, making it efficient and competitive. This choice for efficiency resulted in the division of chips from the oil, smoke abatement and constant improvements in the chain of production, which in turn led to high quality production at a truly competitive prices.
Today, Marangon srl is considered to be one of the most technologically advanced companies in the brass insert field, with its large-scale production including: brass inserts for PPR, brass inserts for PE, brass inserts for CPVC, brass inserts for PPSU and PVDF, brass inserts for water filters, brass transition fittings between plastic and plastic, or plastic and metal.
Marangon Danilo & C. believes that one of its greatest successes is the continuity it has with its clients. It is a relationship of trust that goes beyond the normal transaction that usually takes place between buyer and seller. The company can establish a collaboration of total faith and esteem with its clients because the items it produces become part of the clients’ production cycle.
The new premises of Marangon Danilo & C. was opened in Montecchio Maggiore in 1982. It initially covered 1,000 sqm, but by acquiring the nearby land it now extends over a total surface area of 6,500 sqm, 5,000 sqm of which for production and 1,500 sqm for the depots.
The company uses the most modern machinery, and today it has 29 automatic multi-spindle mechanical and numeric control lathes, and 7 single-spindle CNC lathes for producing smaller lots.
In 1961 Danilo Marangon opened the doors of a mechanical turnery that produced high precision pieces for the most varied sectors of use. In 1985, after intense activity and solid professionalism, the company was ready to specialise in the brass insert sector, and soon became a market reference point. The choice of working only with brass allowed Marangon to slim production, making it efficient and competitive. This choice for efficiency resulted in the division of chips from the oil, smoke abatement and constant improvements in the chain of production, which in turn led to high quality production at a truly competitive prices.
Today, Marangon srl is considered to be one of the most technologically advanced companies in the brass insert field, with its large-scale production including: brass inserts for PPR, brass inserts for PE, brass inserts for CPVC, brass inserts for PPSU and PVDF, brass inserts for water filters, brass transition fittings between plastic and plastic, or plastic and metal.
Marangon Danilo & C. believes that one of its greatest successes is the continuity it has with its clients. It is a relationship of trust that goes beyond the normal transaction that usually takes place between buyer and seller. The company can establish a collaboration of total faith and esteem with its clients because the items it produces become part of the clients’ production cycle.
The new premises of Marangon Danilo & C. was opened in Montecchio Maggiore in 1982. It initially covered 1,000 sqm, but by acquiring the nearby land it now extends over a total surface area of 6,500 sqm, 5,000 sqm of which for production and 1,500 sqm for the depots.
The company uses the most modern machinery, and today it has 29 automatic multi-spindle mechanical and numeric control lathes, and 7 single-spindle CNC lathes for producing smaller lots.