Simco (Nederland) B.V.
P.O. Box 71,
7240 AB
Lochem
Aalsvoort 74, 7241 MB Lochem
Netherlands
Aalsvoort 74, 7241 MB Lochem
Netherlands
Location
Hall map
Fairground map
Our range of products
Product categories
- 01 Raw materials, auxiliaries
- 01.10 Additives
- 01.10.019 Antistatic agents
Antistatic agents
- 03 Machinery and equipment for the plastics and rubber industries
- 03.04 Machinery and plant for finishing, decorating, printing and marking
- 03.04.008 Equipment for In-Mould-Decoration (IMD)
Equipment for In-Mould-Decoration (IMD)
- 03 Machinery and equipment for the plastics and rubber industries
- 03.09 Ancillary equipment
- 03.09.001 Surface pretreatment equipment
Surface pretreatment equipment
- 03 Machinery and equipment for the plastics and rubber industries
- 03.09 Ancillary equipment
- 03.09.010 Electrostatic systems
Electrostatic systems
- 03 Machinery and equipment for the plastics and rubber industries
- 03.10 Measuring and test equipment
- 03.10.002 Measuring and test equipment for mechanical or dynamic properties
- 03.10.002.04 Leak detectors
Leak detectors
- 03 Machinery and equipment for the plastics and rubber industries
- 03.10 Measuring and test equipment
- 03.10.007 Measuring and test equipment for electrical properties
Measuring and test equipment for electrical properties
Our products
Product category: Surface pretreatment equipment
Airknife with Performax Easy anti-static bar
The Airknife with Performax IQ Easy is especially useful for situations where the ionisation or cleaning needs to be mobile s.a. cleaning parts with a robot. With the 24V connection it is easy to install in such applications. The Airknife with Performax IQ Easy is standard available in 4 lenghts, 150, 310, 460 and 610 mm. Longer combinations on request.
- Working distance: 3000 mm max
- Removes dust and other contaminations and neutralises the static charge and prevents retraction contaminants
- Installation possible on moving machine parts such as a robot arm
- Shockless touchable emitters
Product category: Surface pretreatment equipment
Airknife with MEB anti-static bar
A type MEB shockless anti-static bar combined with an airknife come in standard lengths. The compressed air is blown across the high-voltage points over the entire width and amplified by the ambient air carried along. The air flow is saturated by the positive and negative ions produced by the anti-static bar. The air flow neutralises the static charge, enabling any contamination to be easily blown away.
- Working distance: 1000 mm max.
- Removes dust and other contaminations and neutralises the static charge and prevents retraction contaminants
- Shockless touchable emitters
Product category: Surface pretreatment equipment
Typhoon with EP-Sh-N anti-static bar
The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airkife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved.
Airpressure sensor
Each Typhoon system is supplied with an airpressure sensor wich can measure the air pressure inside the airknife. If the pressure drops under the required level, the system does not work optimal. A system check is then neccessary, often it appears that the air filter needs to be cleaned.
Power unit A2A7M
Typhoon systems with EP-Sh-N anti-static bars incorporate a power unit type A2A7M. This unit contains an additional 12V power source for connection of the airpressure sensor.
Airpressure sensor
Each Typhoon system is supplied with an airpressure sensor wich can measure the air pressure inside the airknife. If the pressure drops under the required level, the system does not work optimal. A system check is then neccessary, often it appears that the air filter needs to be cleaned.
Power unit A2A7M
Typhoon systems with EP-Sh-N anti-static bars incorporate a power unit type A2A7M. This unit contains an additional 12V power source for connection of the airpressure sensor.
- Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate
- Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning
- Direct-drive motors require little or no maintenance
- Anodised finish for corrosion protection
- Connection for pressure sensor
- New design extruded aluminium profile
- Cost efficient versus compressed air
- Two mounting grooves
- Small blower/ low noise level
Product category: Surface pretreatment equipment
Typhoon with P-Sh-N-Ex anti-static bar
The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airknife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved.
- Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate
- Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning
- Direct-drive motors require little or no maintenance
- Anodised finish for corrosion protection
- Connection for pressure sensor
- New design extruded aluminium profile
- Cost efficient versus compressed air
- Two mounting grooves
- Small blower/ low noise level
- Approved for use in explosion hazardous zones
- Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate
- Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning
- Direct-drive motors require little or no maintenance
- Anodised finish for corrosion protection
- Connection for pressure sensor
- New design extruded aluminium profile
- Cost efficient versus compressed air
- Two mounting grooves
- Small blower/ low noise level
- Approved for use in explosion hazardous zones
About us
Company details
Organisation
Anyone operating in a large areashould be able to respond rapidly. From receipt to despatch, we use modern systems for supervising and implementing all orders. Although highly automated, the production process is still flexible. Products are despatched by reliable international courier services. We are fully aware that any problems related to static electricity must not only be solved professionally, but usually also as quickly as possible.
Technical skills
To respond effectively to the market needs we are continuously developing new products and applications. In this effort, we are driven by our customers. Many of our products have been developed in close co-operation with our customers. Apart from knowhow, we have resourceful people. Briefly put, Simco-Ion Europe has an adequate solution to almost any problem with static electricity.
Quality
You have a right to expect excellent quality from us. This is why our production processes are subjected to quality checks and a meticulous final inspection to ensure a high quality and reliable end-product.
This continuous quality assurance effort is reflected in the ISO 9001 : 2015 certificate.
Service
Our service doesn’t stop when the product has been delivered. We also devote a great deal of attention to after-sales service. Apart from the usual guarantee, you may always call on us for product repair and calibration.
Anyone operating in a large areashould be able to respond rapidly. From receipt to despatch, we use modern systems for supervising and implementing all orders. Although highly automated, the production process is still flexible. Products are despatched by reliable international courier services. We are fully aware that any problems related to static electricity must not only be solved professionally, but usually also as quickly as possible.
Technical skills
To respond effectively to the market needs we are continuously developing new products and applications. In this effort, we are driven by our customers. Many of our products have been developed in close co-operation with our customers. Apart from knowhow, we have resourceful people. Briefly put, Simco-Ion Europe has an adequate solution to almost any problem with static electricity.
Quality
You have a right to expect excellent quality from us. This is why our production processes are subjected to quality checks and a meticulous final inspection to ensure a high quality and reliable end-product.
This continuous quality assurance effort is reflected in the ISO 9001 : 2015 certificate.
Service
Our service doesn’t stop when the product has been delivered. We also devote a great deal of attention to after-sales service. Apart from the usual guarantee, you may always call on us for product repair and calibration.