GreenAge Industries of Ahmedabad at K 2019 in Düsseldorf -- K Trade Fair

GreenAge Industries

Plot no 123, Road no 6, Kathwada Gidc, Ahmedabad, Gujarat, 382430 Ahmedabad
India
Telephone +91 99 79848853
Fax +91 79 29708677
info@greenageind.com

Hall map

K 2019 hall map (Hall 7, level 2): stand C21

Fairground map

K 2019 fairground map: Hall 7, level 2

Our range of products

Product categories

  • 01  Raw materials, auxiliaries
  • 01.01  Thermoplastics
  • 01.01.079  Polyethylene PE-LLD

Polyethylene PE-LLD

Our products

Product category: Polyethylene PE-LLD

G-3645UV

Since the early 1990’s, linear low density polyethylenes (LLDPEs) have come to the fore in rotational moulding applications, because of their outstanding physical properties (excellent environmental stress crack resistance and impact performance) and ease of processing. Our butene based Ge-3645 & Ge-3938 LLDPE powders are eminently suitable for rotational moulding for these reasons.

During the manufacture of Polyethylene (PE) a variety of catalyst and co-monomers can be used which also have an effect on the properties of the PE. Butene (C4) comonomer is the most common providing low cost, good mechanical properties and the most widely used.

Ge-3645 & Ge-3938 are both butene co-monomer based linear low density polyethylene (LLDPE) grade additivated with antioxidants and UV stabilizers. Items produced by these grades have a very good balance between mechanical properties and ESCR resistance. They possesses good hardness & exhibits good processability.

Green Age Industries is one of the leading manufacturers, supplier & exporter of Water Tank LLDPE Rotomoulding Powder. These can be used in various applications as well. These Products have very much demand in the market.

GREENETHENE G-3645UV is a Low Density Linear Polyethylene Resin (LLDPE) in powder form,
additivated with antioxidants and UV stabilizers. It is suitable for Rotational Molding applications. Items
produced by GREENETHENE G-3645UV have a very good balance between mechanical properties and
ESCR resistance. G-3645UV is produced in: natural, black, terracotta, fire red, yellow & blue.

Due to its combination of mechanical properties, ESCR resistance and fluidity, GREENETHENE
G-3645UV is suggested for the production of wide variety of Storage tank applications of water, chemicals
& Oils. GREENETHENE G-3645UV can also be used for off-shore flotation buoys and road crash barriers.

More Less

Product category: Polyethylene PE-LLD

G-3938

Since the early 1990’s, linear low density polyethylenes (LLDPEs) have come to the fore in rotational moulding applications, because of their outstanding physical properties (excellent environmental stress crack resistance and impact performance) and ease of processing. Our butene based Ge-3645 & Ge-3938 LLDPE powders are eminently suitable for rotational moulding for these reasons.

During the manufacture of Polyethylene (PE) a variety of catalyst and co-monomers can be used which also have an effect on the properties of the PE. Butene (C4) comonomer is the most common providing low cost, good mechanical properties and the most widely used.

Ge-3645 & Ge-3938 are both butene co-monomer based linear low density polyethylene (LLDPE) grade additivated with antioxidants and UV stabilizers. Items produced by these grades have a very good balance between mechanical properties and ESCR resistance. They possesses good hardness & exhibits good processability.

Green Age Industries is one of the leading manufacturers, supplier & exporter of Water Tank LLDPE Rotomoulding Powder. These can be used in various applications as well. These Products have very much demand in the market.

GREENETHENE G-3938 is a Low Density Linear Polyethylene Resin (LLDPE) in powder form,
additivated with antioxidants and UV stabilizers. It is suitable for Rotational Molding applications. Items
produced by GREENETHENE G-3938 have a very good balance between mechanical properties and ESCR
resistance. G-3938 produced in: natural, black also upon request in terracotta, fire red, yellow & blue.

Due to its combination of mechanical properties, ESCR resistance and fluidity, GREENETHENE G-3938 is
suggested for the production of wide variety of tank applications for the storage of water, chemicals & Oils.
GREENETHENE G-3938 can also be used for off-shore flotation buoys and road crash barriers.

More Less

Product category: Polyethylene PE-LLD

G-3904U

When subjected to stress over a period of time most materials commonly fail by cracking. Polyethylene may also suffer this mode of failure. It is important to understand that different grades of Polyethylene can exhibit vastly different performance with respect to crack resistance. The crack resistance should be a major consideration when selecting a grade of polyethylene for a particular application.

The crack resistance of a specific grade of Linear Low Density Polyethylene is governed largely by the size of its molecules (indicated by its Melt Index) and the type and level of comonomer employed in its manufacture. Comonomers such as butene (C4), hexene (C6) and octene (C8) are reacted into the polymer chain in order to produce small side chains which in turn create a deviation, or change of angle in the molecule chain. The effect of this change of angle is somewhat akin to the effect of a knot in a piece of wood. The Polyethylene becomes more difficult to split. The size and quantity of comonomer molecules introduced in to the polymer chain determine the degree to which the crack resistance is improved. For example, the side chain created by the incorporation of hexene is twice the size of that created by the incorporation of butene. As a result, the chain deviation caused by hexene is significantly greater than that caused by the incorporation of butene and results in the hexene LLDPE exhibiting a crack resistance approximately 10 times better than the butene LLDPE. The incorporation of octene in to the polymer chain creates only a slightly larger deviation than that created by the incorporation of hexene and the change in crack resistance is less significant.

Green Age Industries is one of the prominent company engaged in manufacturing, supplying & exporting various grades of Rotational Moulding Powder. Our Premium Models is GE-39044U.

GREENETHENE G-3904U is a HEXENE Co-polymer based Medium Density Polyethylene Resin (MDPE)
in powder form which is designed for Rotational molding applications, containing antioxidants and UV12
stabilizers. Items produced by GREENETHENE G-3904U have an excellent stiffness and a very good
balance between mechanical properties like impact strength and ESCR resistance.

Due to its combination of mechanical properties, ESCR resistance & fluidity, GREENETHENE G-3904U is
suggested for the production of Playground equipment, manholes, storage containers, chemical & Oil tanks.

More Less

About us

Company details

GreenAge Industries have etched their name in the field of development and manufacturing of Rotomoulding Powder/Compounds in blazing fonts. Foundation of the company was laid back in the year 2012. As a subsidiary of 30 year old Umiya Group of Industries which deals in manufacturing and marketing of various dosage forms of plastics packaging products like PET containers (Jars/ Bottles), PP Twins/ Ropes, Kitchenware (Cutlery), Plastic Bags, Green Age has been able to create its own glowing identity.


GreenAge Industries boasts of niche clientele in number of leading and prominent companies such as K K Nag Ltd, Astral Polytechnik Ltd, Consta Cool Pvt Ltd, Promens India Pvt Ltd, ITC Ltd (Food Division), Parle Agro, Dabur India Ltd., WaghBakri Tea etc. We have steered our way up as the first preference of our patrons through outstanding quality, right quantity and punctuality in delivery of our products.


Our adherence to technical details and support while innovating and improvising to expand the range of rotomoulding materials has carved our name as the industry leader. Our relationship with our customers extends way beyond the sales, in the form of technical support and services.

More Less