SBI Produktion techn. Anl. GmbH & Co KG

Kaplanstr. 12, 2020 Hollabrunn
Austria
Telephone +43 2952 341390
Fax +43 2952 3413910
office@sbi.at

Hall map

K 2019 hall map (Hall 11): stand C69

Fairground map

K 2019 fairground map: Hall 11

Contact

Andreas Huemer

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.06  Moulds and dies
  • 03.06.003  Extrusion dies
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.10  Measuring and test equipment
  • 03.10.002  Measuring and test equipment for mechanical or dynamic properties
  • 03.10.002.01  Thickness gauges

Our products

Product category: Thickness gauges

Inline thickness gauge KAPA

SBI's inline thickness gauge KAPA is designed for sheets up to 2 mm
Accuracy: 0,1 micron
Most sold system for thermoforming sheet or similar, high accurate also for thickness control in combination of automatic extrusion dies.

More Less

Product category: Thickness gauges

KAPA II

Inline thickness gauge KAPA II is designed for sheet thickness up to 6 mm
Accuracy: 1 µm
Mainly installed in extrusion lines for sheets running (sometimes also) sheets thicker than 2 mm (limit for standard KAPA). But also for thickner sheets which are flexible enough to be guided over the measurement roller (at least on the postition where the thickness gauge is installed). For example: sheet for refrigerator body liner.

More Less

Product category: Thickness gauges

Inline thickness gauge for extrusion coating / lamination

2 (or more) scanners for thickness gauge are installed on extrusion coation lines. Thickness of coating is measured due to difference of both scanners. 
Thickness of substrat as well as coating layer can be controlled in combination with at automatic extrusion die.

More Less

Product category: Thickness gauges

Thickness gauging of barriere layer

SBI's newly developed inline thickness gauge KAPA-IR uses the well-known, relyable capacitive method (KAPA) and as newly developed infrared sensor system (IR) for detecting the EVOH thickness profile in a multilayer barriere sheet.
This new measurement system enables to detect the EVOH layer of transparent and opaque multi-layer sheet.
SBI mainly focuses with this measuring system on measuring PP/EVOH/PP sheets, but it is also possible to gauge the EVOH layer profile in other multilayer sheets.

More Less

Product category: Thickness gauges

Inline thickness gauge for thick, rigid sheets

Inline thickness gauge with laser displacement sensors
Accuracy: 20 µm at measurement range of 10 mm
Sensors with higher measurement range are also available, but influences accuracy of system.

More Less

Product category: Extrusion dies

Autmatic systems for extrusion dies

Retrofit-able actuator system for extrusion dies for extrusion with automatic thickness control.
System: Thermal bolts

Actuators: steel bolts with heating cartridges, operating range 300 µm + manual adjustment
Partition of actuators: 30, 28 or 25,4 mm (1”) or according customer specification.
Puh only as well as push & pull systems are available.
Perfect system for automatic die adjustment in order to get a even thickness profile, controlled by modern thickness gauges enabled to control automatic dies.

More Less