EXPERT S.r.l.

Compact and friendly – New easy and flexible version
Very compact and easy accessible gearless C. I. flexo printing press. Flexible machine, developed for short and long runs, with an interesting quality/investment ratio.

Compact and friendly – New easy and flexible version
Very compact and easy accessible gearless C. I. flexo printing press. Flexible machine, developed for short runs, with an interesting quality/investment ratio.
Easy central drum cleaning and very easily/quickly changing job without the use of stairs or tools.

Designed for large format printing. Compact and easy to use thanks to its low height, perfect for those who need to work with large sizes and look for a great value for money / investment.

Very compact and easy accessible gearless C. I. flexo printing press. Flexible machine, developed for short and long runs, with an interesting quality/investment ratio.

Machine with gearless “GL” transmission.

• Printing group with: 4, 6 or 8 colour stations,
• All printing possibilities  (front- and back-side printing),
• Printing width from 800 up to 1800 mm,
• Mechanical speed: up to 300 mt/min.,
• Printing length: from 320/500 to 900, 1100 or 1250 mm,
• Plate sleeve change with automatic opening and closing of the front supports,
• Anilox sleeve change with manual opening and closing of the front supports,
• Each counter-impression cylinder driven by its own brush-less motor,
• Automatic pre-register at machine start up, even for back to front printing,
• 4-Motor print deck positioning with job memorisation and recall,
• Horizontal, sequential throw-on/off system,
• Printing units with closed chamber doctor blade inking. Optional: rubber roll inking,
• Motorised longitudinal and axial register adjustment,
• Drying system with 2 or 4 fans, with electric battery, gas heating or others,
• Machine provided to print with water- or solvent based inks,
• Enclosed printing stand with solvent reclaiming system,
• Motor driven chill roll for the reconditioning and the out-feed tensioning,
• Large range of un- and rewinders and ancillary equipment available on request, like: edge guides, video web inspections, viscosity controllers, automatic inking and washing units “RC-SYSTEM”, air recirculation with LEL control and others.