esde Maschinentechnik GmbH

Effective Plastifying
Our fine-tuned machine conception with direct drive and barrier screw provides extremely energy-saving extruders of low maintenance requirements.  For the extrusion of thermoplastic materials and output rates between 1 kg/h up to 1300 kg/h maximal you can choose among 6 extruder sizes.

The esde Single Screw Extruders are distinguished by their high output achievement on a low temperature level.  For melting the plastic material esde extruders gain the necessary heat almost exclusively from the motor and hardly from the heating/cooling system on the barrel.

Highest possible Quality Standards
„Made in Germany“  is a reference for very good quality.  Our customers appreciate the high standard and long lifetime of the esde Single Screw Extruders.  They are designed and built at our location in Bad Oeynhausen.  Each single component of an esde extruder is always manufactured in accordance with the highest quality demands.

Therefore all our Extruders and Extrusion Lines are designed for many years of operation and in 10 or even in 20 years you can count on the same cost-effectiveness and reliability.

For further information please refer to
www.esde-maschinentechnik.de/en/products/extruders/single-screw-extruders

esde Laboratory Extruders  - small All-Rounders for Extrusion
esde Laboratory Extruders provide everything what the large esde Extruders provide – only in a smaller version.

They do an excellent job, are versatile and reliable – whether it is in product development in your laboratory or technical center, a small batch production or educating or training future process engineers.

esde Laboratory Extruders are employed where low outputs are required in order to use material sparingly.  Because material to be extruded is often expensive or many different materials should be tested when the time is short.  Therefore esde provides solutions for a resource-saving material feed.

For further information please refer to
www.esde-maschinentechnik.de/en/products/extruders/laboratory-extruders

First Proto-Types and Small-Batch Production

With esde laboratory lines you can develop and produce films and sheets in small batches.  Regarding design and execution they are real production lines in small format.  Our lines are suitable to work 24 hours a day and 7 days a week.  Therefore the changeover from product development to small batch production is simple and extremely efficient

The functionality of an esde laboratory line will be economically adapted to the assignment of the task. Our extrusion lines are based on a modular design.  Into the low-cost basic version further equipment can be constructed and integrated, thus providing a real additional benefit for the particular task.

The most important Points for esde Laboratory Lines

• Tailor-made Laboratory Lines for film and sheets of small width
• Suitable for the development of new products, material sampling and small batch production
• Robust, solid construction
• No matter if 1 hour operation or 24/7 continuous operation
• Simple handling and easy operability
• Short response time
• Suitable for a wide range of thermoplastics                                              
• A most energy efficient machinery conception       
• Complete water-cooled electrics inside machine housing
•  Variable, modular construction

For further information refer to
www.esde-maschinentechnik.de/en/products/extrusion-lines/laboratory-lines

Perfect Finish of Film and Sheets
We realize individual configurations for the optimal adaptation of our Polishing Stack to the desired surface quality and thickness tolerances of the film.  The first-class quality of our Polishing Stacks allows a reliable production at highest level, designed for many years of operation.  The handling and operating of the esde Polishing Stack is our own design and is persuasive in its flexibility to most different tasks.

The Factor of Success on the esde Polishing Stacks
The production of high quality film requires an optimal temperature distribution.  The amount of needed cooling water in our Polishing Stacks is infinitely adapted to the heat requirements during the manufacturing process.  In addition the continuous thermal flow of the roller water is supported by a progressively tapered helix.

In this way we achieve, on the contact surfaces of the film, a temperature distribution accuracy of +/- 1°C: A highly effective system with low consumption of energy and water!

For further information refer to
www.esde-maschinentechnik.de/en/products/components/polishing-stacks

esde creates a flexible and economical Extrusion

All the components of an esde Flat Film Extrusion Line are constructed and in its details constantly improved by our designers.  We impose great value on attentive advisory service to enable an individually designed extrusion line to satisfactorily work for many years on particularly high efficiency.

The strength of our system is the coherent conception of one or more extruders, the sheet extrusion die, the polishing stack and the well matched downstream equipment for films and sheets.

esde Delivery Program

• Film Extrusion Lines
• Sheet Extrusion Lines

Thickness of Film and Sheets

• up to 200 µm
• up to 12 mm (compact sheets)
• up to 30 mm (foamed sheets)

Final Width

• up to 2.100 mm
• up to 2.300 mm

The most important Points for esde Extrusion Lines

• Taylor-made extrusion line design
• Robust, solid construction
• Simple handling and easy operability
• „Made in Germany“
• Suitable for a wide range of thermoplastics                                              
• A most energy efficient machinery conception       
• Compact design with the complete water-cooled electrics inside the machine housing

For further information refer to
www.esde-maschinentechnik.de/en/products/extrusion-lines