Please log in
You must be logged in to use matchmaking
Manage stand orders
Select Option
Enercon Industries Corp.
P.O. Box 773,
53052
Menomonee Falls, WI
W140 N9572 Fountain Blvd., 53051 Menomonee Falls, WI
USA
W140 N9572 Fountain Blvd., 53051 Menomonee Falls, WI
USA
Telephone +1 262 2556070
Fax +1 262 2557784
Fax +1 262 2557784
Location
Hall map
Fairground map
Contact
Mark Plantier
Ryan Schuelke
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 03 Machinery and equipment for the plastics and rubber industries
- 03.09 Ancillary equipment
- 03.09.001 Surface pretreatment equipment
Surface pretreatment equipment
Our products
Product category: Surface pretreatment equipment
Corona Treaters for Film Extruding & Converting
Improve surface energy for film conversion and extrusion.
Our engineers examine all the specifications of your application when specifying a custom corona treater for your operation. Whether you need fixed width treatment, lane treatment, pattern treatment or skip treatment, Enercon has the electrode designs, roll coverings and power supply control architecture to handle your requirements. And our team can help you decide the best location for your corona treater and ensure it integrates seamlessly with your blown film, cast film or converting line.
Printing, Converting, Laminating
Enercon’s ceramic electrode corona treaters are designed for conductive and non conductive films in printing, coating, & laminating operations, as well as blown and cast film lines where lane treating is not required. High performance “H” system produces homogenous corona and the industry’s best insurance against backside treatment, film wrinkling and pinholing.
Blown & Cast Film
Enercon’s covered roll corona treaters are specifically designed for blown and cast film lines, and non-conductive film converting applications. A compact and simple construction allows for two-sided and adjustable lane treating. The electrode system provides simple, trouble-free air-gap adjustment.
Electrodes
You’ll find Enercon equipment integrated on printing, coating, laminating and extrusion lines with every major OEM in the world. Enercon works very closely with all OEMS to ensure they also recognize critical variables that can impact corona treater selection. Defining the application variables at the beginning of the project will avoid application issues down the road and save you money up front.
Our engineers examine all the specifications of your application when specifying a custom corona treater for your operation. Whether you need fixed width treatment, lane treatment, pattern treatment or skip treatment, Enercon has the electrode designs, roll coverings and power supply control architecture to handle your requirements. And our team can help you decide the best location for your corona treater and ensure it integrates seamlessly with your blown film, cast film or converting line.
Printing, Converting, Laminating
Enercon’s ceramic electrode corona treaters are designed for conductive and non conductive films in printing, coating, & laminating operations, as well as blown and cast film lines where lane treating is not required. High performance “H” system produces homogenous corona and the industry’s best insurance against backside treatment, film wrinkling and pinholing.
Blown & Cast Film
Enercon’s covered roll corona treaters are specifically designed for blown and cast film lines, and non-conductive film converting applications. A compact and simple construction allows for two-sided and adjustable lane treating. The electrode system provides simple, trouble-free air-gap adjustment.
Electrodes
- Ceramic electrodes: Enercon manufactures several ceramic electrode designs optimized to work with our Bare and Universal Roll Corona Treater systems.
- Segmented electrodes: Segmented electrodes allow for lane and pattern treating. Fixed width electrodes work well for most non-conductive basic converting applications.
You’ll find Enercon equipment integrated on printing, coating, laminating and extrusion lines with every major OEM in the world. Enercon works very closely with all OEMS to ensure they also recognize critical variables that can impact corona treater selection. Defining the application variables at the beginning of the project will avoid application issues down the road and save you money up front.
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Surface pretreatment equipment
Easy Thread Corona Treater for Blown Film
This Blown Film corona treater features Enercon’s reliable power supply technology with an innovative frame design that allows for easy thread up of films for two sided treating. Provides reliable treatment and simple operation for operations requiring adjustable width and lane surface treatment.
Electrode Assembly:
Electrode Assembly:
- Stainless Steel Flip Segments minimize the effects of oxidation
- Easy Thread-up: Pneumatically actuated electrode assembly
- Easy maintenance: Hinged design enables easy clean-in-place maintenance
- Ozone Protection: Exhaust through electrode assembly removes ozone from the work area
- Treat width up to 2000mm
- 100, 125 or 150mm diameter available
- Low intertia dead shaft ground roll
- Silicone sleeve covering
- Rolls mounted on free-running bearings
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Surface pretreatment equipment
Compak™ Pro Corona Treating Power Supply
Enercon’s newest power supply is designed for professional converters & extruders looking to maximize their productivity.
This innovative new system features an touch screen providing users with operating control, detailed system data, maintenance reminders and support options. Its integrated artificial intelligence automatically recognizes when a fault takes place and captures key system parameters.
Simple Installation
Integrated Start-up Features
New support features include onboard troubleshooting tips, custom maintenance reminders and real-time fault monitoring. In addition to logging and time stamping any faults, the system automatically takes a detailed snapshot of operating data when the fault occurs.
A USB port allows users to download this data and share with Enercon Service Engineers for quick resolution of any issues. Users can also use the USB to capture maintenance and event logs as well as update software in the field.
This innovative new system features an touch screen providing users with operating control, detailed system data, maintenance reminders and support options. Its integrated artificial intelligence automatically recognizes when a fault takes place and captures key system parameters.
Simple Installation
Integrated Start-up Features
- Auto/Manual Start
- Control Electrode Assemblies & Exhaust Blower
- Wet start for humid environments
New support features include onboard troubleshooting tips, custom maintenance reminders and real-time fault monitoring. In addition to logging and time stamping any faults, the system automatically takes a detailed snapshot of operating data when the fault occurs.
A USB port allows users to download this data and share with Enercon Service Engineers for quick resolution of any issues. Users can also use the USB to capture maintenance and event logs as well as update software in the field.
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Surface pretreatment equipment
Blown-ion™ Series Plasma Treater with Multiport™ Technology
Enercon’s NEW Blown-ion™ Plasma Technology produces powerful treatment for applications requiring uniform surface treatment at wider widths to improve adhesion at high speeds. This Blown-ion™ plasma treater uses a MultiPort™ design that targets surfaces with an intense, high speed discharge of ions to clean, etch & functionalize surfaces. Treatment removes contaminants, increases bonding sites, & improves the wettability of plastics, composites & metal surfaces for improved adhesion.
Easy Set Up
Reliable Industrial Design
USB Data Drive
Easy Set Up
Reliable Industrial Design
USB Data Drive
- Download system data
- Upload software data
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Surface pretreatment equipment
Blown-ion™ Series Plasma Treater
Enercon’s Blown-ion Plasma Technology delivers highly effective treatment for both conductive and non-conductive surfaces to improve surface adhesion properties prior to bonding with inks, coatings, & adhesives. Plasma treaters bombard a surface with high speed ion discharge to clean, etch and functionalize surfaces. Its focused treatment works well on flat surfaces and difficult to reach areas. Available with either one or two treatment heads in both standard and Pro Series configurations.
Compact Footprint
Fully enclosed stainless steel body construction for industrial environments.
Easy Set Up
Reliable Industrial Design
USB Data Drive
Compact Footprint
Fully enclosed stainless steel body construction for industrial environments.
Easy Set Up
Reliable Industrial Design
USB Data Drive
- Download system data
- Upload software updates
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Surface pretreatment equipment
Blown-arc™ Series Plasma Treater
Enercon’s Blown-arc Plasma Technology delivers highly effective treatment for non-conductive surfaces prior to bonding with inks, coatings, & adhesives. Plasma Treaters bombard surfaces with a high speed discharge of ions to clean, etch and functionalize surfaces for improved adhesion. Its wide treatment path works well on a variety of surfaces. Models are available with either one or two treatment heads in both standard and Pro Series configurations.
Compact Footprint
Fully enclosed stainless steel body construction for industrial environments.
Easy Set Up
Reliable Industrial Design
USB Data Drive
Compact Footprint
Fully enclosed stainless steel body construction for industrial environments.
Easy Set Up
Reliable Industrial Design
USB Data Drive
- Download system data
- Upload software updates
Target Products
Film/Sheet,
Flexible/Elastic
Company news
Date
Topic
25 Sep 2019
Enercon Industries to Display Complete Range of Corona, Plasma and Flame Surface Treating Technologies
Menomonee Falls, WI – How do you fit over 45 years of surface treating technology expertise into a 36 square meter trade show stand? Enercon Industries has developed ingenious hands-on displays which cover its complete range of corona, plasma and flame surface treating technologies. Visitors to Enercon’s stand (Hall11/A68) can explore 5 unique electrode assemblies featuring variations of high-powered ceramic and stainless steel electrodes. By mixing and matching various ground rolls in the display, visitors will gain an in-depth understanding of which technology is best for their application. Visitors will also gain insights on Enercon’s proprietary High Definition Corona Technology for demanding applications.
The display also includes two power supply touchscreen interfaces, the new Compak™ Pro and the Compak™ Proflex, which will offer simulations of various operating conditions. These state-of-the-art interfaces offer advanced features including onboard troubleshooting, maintenance reminders, artificial intelligence that captures data for in-depth performance analysis and a USB port for downloading data and uploading software updates.
Enercon is also displaying its full range of plasma and flame surface treating technologies for treating objects. These technologies clean, etch and functionalize surfaces to improve adhesion of inks, adhesives, coatings and paint. Included in the display is Enercon’s new Blown-ion™ Plasma Treater with MultiPort™ Technology. This innovative system sets new standards for treatment power, uniformity and width for blown-ion plasma treatment.
Enercon Industries Corporation, headquartered in Menomonee Falls, WI, is a major manufacturer of equipment for the plastics, converting and packaging industries. The company supplies custom built corona and atmospheric plasma treating systems, as well as induction cap sealing systems.
###
The display also includes two power supply touchscreen interfaces, the new Compak™ Pro and the Compak™ Proflex, which will offer simulations of various operating conditions. These state-of-the-art interfaces offer advanced features including onboard troubleshooting, maintenance reminders, artificial intelligence that captures data for in-depth performance analysis and a USB port for downloading data and uploading software updates.
Enercon is also displaying its full range of plasma and flame surface treating technologies for treating objects. These technologies clean, etch and functionalize surfaces to improve adhesion of inks, adhesives, coatings and paint. Included in the display is Enercon’s new Blown-ion™ Plasma Treater with MultiPort™ Technology. This innovative system sets new standards for treatment power, uniformity and width for blown-ion plasma treatment.
Enercon Industries Corporation, headquartered in Menomonee Falls, WI, is a major manufacturer of equipment for the plastics, converting and packaging industries. The company supplies custom built corona and atmospheric plasma treating systems, as well as induction cap sealing systems.
###
About us
Company portrait
Corona, Plasma and Flame Surface Treating Solutions
Enercon manufactures atmospheric plasma, flame & corona surface treaters that clean, etch & functionalize surfaces for a variety of ink, printing, coating, laminating, painting, adhesive & bonding applications for plastics, polymers, films, foils and metals.
Improve adhesion with Enercon’s complete line of surface treating solutions. Enercon’ wide range of equipment for the converting and extruding industries include corona, atmospheric plasma, flame and ozone treaters. Enercon surface treatment solutions are highly scalable with systems designed for the narrowest of lines up to seven meters and beyond in width.
Enercon induction cap sealers are recognized around the world for providing tamper evidence, preventing leaks and preserving freshness with hermetic seals for packagers of food, beverage, pharmaceuticals, health & beauty products, chemicals & petroleum packages.
Enercon manufactures atmospheric plasma, flame & corona surface treaters that clean, etch & functionalize surfaces for a variety of ink, printing, coating, laminating, painting, adhesive & bonding applications for plastics, polymers, films, foils and metals.
Improve adhesion with Enercon’s complete line of surface treating solutions. Enercon’ wide range of equipment for the converting and extruding industries include corona, atmospheric plasma, flame and ozone treaters. Enercon surface treatment solutions are highly scalable with systems designed for the narrowest of lines up to seven meters and beyond in width.
Enercon induction cap sealers are recognized around the world for providing tamper evidence, preventing leaks and preserving freshness with hermetic seals for packagers of food, beverage, pharmaceuticals, health & beauty products, chemicals & petroleum packages.