Bagsik Sp. z o.o.

Temperature sensors from our offer are designed to measure temperature of melt plastics including rubber, paste and liquids up to 400°C.

The measurement may be carried out through different type configurations:
Only PT100 sensor can be connected with a copper cable. Other J, K, L types should be linked with the same type cables.

The sensor construction does not influence on the material flow and it does not cause degradation ok plastics which have to be homogenised.

All temperature sensors are equipped with coned measurement stud, which allows to a proper and simple montage. These cable connections are also equipped with stable end with rotate-and-lock coupling. The length of metering tip may be selected within 5 mm. The standard version may be used to 400oC. For high tempera tures we offer special sensors for up to 50°C.

In our offer you can find:

• Displays and amplifiers BGK type
• Thermocouples
• TFC and TFL series sensors
• Connectors and cables
• Sensor socket cleaning tools and kits
• Reduction bushings for sensor instalation
• Bayonets for thermocouples

In our offer you can find gear pumps, which provide optimum work safety, and maximizes the efficiency of the production lines. Our gear pumps are directed to customers in the plastics, chemical, pharmaceutical, food and cosmetics industry.

 Gear pumps reduce the natural pulsation of the extruder, so material absorbs less heat which causes that the product is transported in a gentler manner. Pumps of this type are recommended for production lines, which produce precision profiles, films and pellets.

Main application areas:

• Extrusion and transportation,
• for high pressure,
• increasing pressure,
• transport and dosing,
• measuring and material handling for small and medium viscosity materials,
• extruder feed systems (eg. pushing mechanisms).

To meet the needs of our customers, we offer new and used filter screen changers and repair service for all screen changers, along with their comprehensive technical support. In addition, we offer square mesh and non-mesh filter screens made of different types of steel in the form of single or multi-layer - which provides better homogenization of the material .

We can deliver every filtration system, depending on individual needs, e.g.:

•  simple
• semi-automatic
• automatic and self-cleaning
• 1- and 2-socket sliding plates
• with one or two sliding plates
• 1- and 2-socket pin systems with round or oval nets
• pin systems with one or multiple pins