Otto Ganter GmbH & Co. KG
Triberger Str. 3,
78120
Furtwangen
Germany
Germany
Location
Hall map
Fairground map
Contact
Axel Weber
Abteilungsleiter
Marketing
Marketing
Berthold Ganter
Abteilungsleiter
Vertrieb Inland
Vertrieb Inland
Our range of products
Product categories
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.03 Supplying
- 02.03.001 Plastics products and parts for plant building
Plastics products and parts for plant building
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.03 Supplying
- 02.03.002 Plastics products and parts for automotive
Plastics products and parts for automotive
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.03 Supplying
- 02.03.010 Plastics products and parts for aviation
Plastics products and parts for aviation
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.03 Supplying
- 02.03.011 Plastics products and parts for mechanical engineering
Plastics products and parts for mechanical engineering
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.03 Supplying
- 02.03.012 Plastics products and parts for medical engineering
Plastics products and parts for medical engineering
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.03 Supplying
- 02.03.014 Plastics products and parts for food processing industry
Plastics products and parts for food processing industry
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.03 Supplying
- 02.03.015 Plastics products and parts for transport/packaging
Plastics products and parts for transport/packaging
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.05 Products
- 02.05.004 Fastenings
Fastenings
- 02 Semi-finished products, technical parts and reinforced plastics
- 02.05 Products
- 02.05.025 Handles
Handles
Our products
Cabinet U-handles GN 422
The zinc die-cast cabinet "U" handles with power switching function GN 422 can be utilized for any application due to their universal design.
They are typically used on safety doors for unlocking safety closures.
The cabinet "U" handles are also equipped with one or two switches with integrated LED ring lighting, which light up red or green depending on the polarity.
The switches GN 3310 and the suitable cables with connector coupling GN 330 can be ordered separately.
Find out more in the internet at www.ganter-griff.com
They are typically used on safety doors for unlocking safety closures.
The cabinet "U" handles are also equipped with one or two switches with integrated LED ring lighting, which light up red or green depending on the polarity.
The switches GN 3310 and the suitable cables with connector coupling GN 330 can be ordered separately.
Find out more in the internet at www.ganter-griff.com
Adjustable Hinges GN 235
Depending on their shape, GN 235 adjustable hinges can be adjusted vertically and laterally along the cylindrical slots.
They can be mounted for example using hex-head, oval-head or cylinder screws with a low head, which allows a full pivoting range of 180°.
They are available in zinc die casting and Stainless Steel.
They can be mounted for example using hex-head, oval-head or cylinder screws with a low head, which allows a full pivoting range of 180°.
They are available in zinc die casting and Stainless Steel.
Product category: Plastics products and parts for mechanical engineering
GN 655 Flow indicator
GN 655 visual flow indicators are now available in the version with AISI 316 stainless steel bosses and packing ring in VITON®.
Executions with brass bosses and NBR synthetic rubber gasket are also available, as alternative.
The indicators can be mounted in any position. Maximum visibility of the flow from all angles guaranteed by the tubular window in PYREX® glass, which is also suitable for use with glycol-based solutions.
Executions with brass bosses and NBR synthetic rubber gasket are also available, as alternative.
The indicators can be mounted in any position. Maximum visibility of the flow from all angles guaranteed by the tubular window in PYREX® glass, which is also suitable for use with glycol-based solutions.
Product category: Plastics products and parts for mechanical engineering
GN 6336.13 Star knobs with loss protection
Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).
The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).
Product category: Plastics products and parts for mechanical engineering
GN 743 Oil level sight glasses
Oil level sight glasses GN 743 offer genuine glass of high stability and scratch proof. The sealing is achieved with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
The outside diameter of these oil level sight glasses with recessed hexagon is chosen to match mounting holes for tube connections according to DIN 3852.
The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.
Oil level sight glasses GN 743 can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request.
The outside diameter of these oil level sight glasses with recessed hexagon is chosen to match mounting holes for tube connections according to DIN 3852.
The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.
Oil level sight glasses GN 743 can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request.
Product category: Plastics products and parts for mechanical engineering
Ganter magnets
News from Ganter in Furtwangen
Standard element maker Ganter of Furtwangen has enlarged its extensive product portfolio with the “retaining magnets” line of products. The new, extensive range includes different types and designs such as flat grippers, rod-type grippers, button magnets and U-type magnets.
Owing to their structure, all the magnet systems have only one magnetic contact surface, with the magnetic power being focused onto the adhesive contact surface directly with iron poles. Many designs have a shielded magnet system, preventing the surround-ing area from being magnetised.
Standard element maker Ganter of Furtwangen has enlarged its extensive product portfolio with the “retaining magnets” line of products. The new, extensive range includes different types and designs such as flat grippers, rod-type grippers, button magnets and U-type magnets.
Owing to their structure, all the magnet systems have only one magnetic contact surface, with the magnetic power being focused onto the adhesive contact surface directly with iron poles. Many designs have a shielded magnet system, preventing the surround-ing area from being magnetised.
Product category: Plastics products and parts for mechanical engineering
GN 735 Control handwheels
Control handwheels GN 735 are used for setting operations with low torque.
Coarse setting is made by means of the cylindrical handle (fingertip grip) followed by fine setting using the knurled rim of the handwheel.
Coarse setting is made by means of the cylindrical handle (fingertip grip) followed by fine setting using the knurled rim of the handwheel.
About us
Company data
Number of employees101 - 500
Foundation1894