GT 7030 Thermoform Machine
GT7030 General Specifications
Forming area 700 x 400 mm.
Mold forming depth 150 mm- optional (MAX) 170 mm
Chain moving with Servo Motor
Servo main engine 11 kw ( 31 Nm,3000 rpm )
Servo Plug Assist Motor 7.5 kw ( 25.5 Nm, 3000 rpm ), ( with automatic lubrication)
Unwinder (AC) motor 0.75kw ( 89 Nm, 1435 rpm )
Cutting (AC) motor 1.5 kw ( 22 Nm , 2830 rpm )
Waste roller ( AC)motor.0.75 kw (50 Nm ,940 rpm )
Chain pulling engine 4 kw.( 9.40 Nm,4500 rpm ) with back and forth moving ability
Becker Brand Vacuum Pump 1.5 kw.
Width material Adjustment according to plate dimension
Stainless Steel Raw Material Chain Levers with upper and lower side cooling abilities
Chain Levers that spreading the plate automatically when machine is turned on.
15-Area Controlled Upper Pan Heat Controlling
3-Area Controlled Lower Pan Heat Controlling
Heating pan side cowers
Laser Sensor Sheet Hanging controller
Machine Cams ( 10 years warranty )
Automatic central lubrication with electric pump
Shock Absorbers to absorb the vibrations of moving lower block
Electronic Cutting Adjustment for Upper Mould
Upper and lower mould (tools) return water temperature control from plc.
Safety Valves and Indicator for Machine inflow
Air Pressure.Forming Air pressure indicator
Pressing Air Pressure Setting and Indicator
Full Automatic Operation
Heat Controlling option when machine is on stand-by position
Motor-Driven Water Canalizing that adjusts automatically the heat difference between lower and upper moulds whit plc.
Dropsa Brand Automatic Chain Lubrication System
Touchscreen PLC controlling
Heat Difference Indicator
Water connection indicator
Mould Vacuum system
SMC Brand pneumatic valves
TFT Color Touch Screen
Turkish-English Language Option. Programming with voice
Electric board Air-Conditioner
For chain inlet ceramic pre heaters