Guven Teknik Makina ve Kalip San. Dis. Tic. Ltd. Sti.

GTS 900 Steel Rule Cutting Machine General Specifications
High performance, easy and safe operation with high techology.
Rebust and solid machine body specially for high speed and non-stop production.
Smart speed setting ability by touchscreen.
Advanced heating system with izolated ceramic heater. NO NEED FOR PREHEATER.
Quick tool changing and smart tool locking system.
Reliable after sale service.
Latest generation of software program and touch screen operating panel.
High speed modem connection in order to facilitate after sale support.
Induvidual lubrication inlets for each bearing.

GT7050M General Specifications
Effective forming area : 700×550 mm.
Extra reinforced monolithic body and reinforced mould holding and cutting systems.
Maximum forming depth : 150 mm.
Speed : Max 45 production cycle ( 71mm-1.5 gr PP )
Production material : PP, PET, PS
Max width of sheet : 710 mm
Power : Three – phase neutral + G 3/PE, 50 Hz, 400 V
Electric consumption : 70 Kw/h (71mm-1.5 gr pp )
No need preheating with the advanced heaters design.
Niddle bearing systems for mould holder arms and moving systems.
Omron Servo Drive main motor
Omron Servo drive plug assist Motor (with automatic lubrication)
Omron Servo drive chain pulling engine.
Sew Eurodrive Gear Box.
Becker Brand (German) vacuum Pump.
Bekamax Brand (German) automatic central greasing.
Pfannenberg Brand (German) air conditioner for electric cabin.
Elstain Brand (German) H Series Ceramics heaters.
SMC brand (Japan) grease-free operating pneumatic valves.
Mac brand (American) forming valves.
Full automatic Omron motion control operation.
24 area controlled upper pan heat controlling.
4 area controlled lower pan heat controlling.
10 year warranty for machine cam.
5 years warranty for special design chain guides.
5 years warranty for plug assist mechanic system.
1 year warranty for general parts and electtronic parts.
Powered solid main body for high speed.
Special design cam system for high speed.
Special production steell ejector pistons.
Motorized PLC control cutting design.

GT7030M General Specifications
Effective forming area: 700×400 mm.
Maximum forming depth: 150 mm.
Speed : 45 production cycle ( 71mm-1.4 gr PP )
Production material: PP, PET, PS
Max width of sheet: 710 mm
Power : Three-phase neutral + G / 3/PE, 50 Hz, 400 V
Electric consumption: 60 Kw/h (71mm-1.4 gr pp )
Omron Servo Drive main motor
Omron Servo drive plug assist Motor (with automatic lubrication)
Omron Servo drive chain pulling engine.
Sew Eurodrive Gear Box.
Becker Brand (German) vacuum Pump.
Bekamax Brand (German) automatic central greasing.
Pfannenberg Brand (German) air conditioner for electric cabin.
Elstain Brand (German) H Series Ceramics heaters.
SMC brand (Japan) grease-free operating pneumatic valves.
Mac brand (American) forming valves.
Full automatic Omron motion control operation.
24 area controlled upper pan heat controlling.
4 area controlled lower pan heat controlling.
10 year warranty for machine cam.
5 years warranty for special design chain guides.
5 years warranty for plug assist mechanic system.
1 year warranty for general parts and electtronic parts.
Powered solid main body for high speed.
Special desgin cam system for high speed.
Special production steell ejector pistons.
Motorized PLC control cutting design.

GT7030 General Specifications
Forming area 700 x 400 mm.
Mold forming depth 150 mm- optional (MAX) 170 mm
Chain moving with Servo Motor
Servo main engine 11 kw ( 31 Nm,3000 rpm )
Servo Plug Assist Motor 7.5 kw ( 25.5 Nm, 3000 rpm ), ( with automatic lubrication)
Unwinder (AC) motor 0.75kw ( 89 Nm, 1435 rpm )
Cutting (AC) motor 1.5 kw ( 22 Nm , 2830 rpm )
Waste roller ( AC)motor.0.75 kw (50 Nm ,940 rpm )
Chain pulling engine 4 kw.( 9.40 Nm,4500 rpm ) with back and forth moving ability
Becker Brand Vacuum Pump 1.5 kw.
Width material Adjustment according to plate dimension
Stainless Steel Raw Material Chain Levers with upper and lower side cooling abilities
Chain Levers that spreading the plate automatically when machine is turned on.
15-Area Controlled Upper Pan Heat Controlling
3-Area Controlled Lower Pan Heat Controlling
Ceramic Heaters.
Heating pan side cowers
Laser Sensor Sheet Hanging controller
Machine Cams ( 10 years warranty )
Automatic central lubrication with electric pump
Shock Absorbers to absorb the vibrations of moving lower block
Electronic Cutting Adjustment for Upper Mould
Upper and lower mould (tools) return water temperature control from plc.
Safety Valves and Indicator for Machine inflow
Air Pressure.Forming Air pressure indicator
Pressing Air Pressure Setting and Indicator
Full Automatic Operation
Heat Controlling option when machine is on stand-by position
Motor-Driven Water Canalizing that adjusts automatically the heat difference between lower and upper moulds whit plc.
Dropsa Brand Automatic Chain Lubrication System
Touchscreen PLC controlling
Heat Difference Indicator
Water connection indicator
Mould Vacuum system
SMC Brand pneumatic valves
TFT Color Touch Screen
Turkish-English Language Option. Programming with voice
Usb connection
Electric board Air-Conditioner
For chain inlet ceramic pre heaters