FASTOSI S.R.L.

Our extrusion lines are unique for their solid construction and their flexibility. Considerable benefits are given by the fact that the whole production can be managed by using the touch-screen interface with the possibility of memorizing settings relevant to each production.

The production of standard metric system dies for rod lines starts from a diameter of 5 mm to up to 300 mm, for perforated rods the diameter starts from 50 mm to 300 mm with the opening’s diameter of 30 mm up to 270 mm and a minimum thickness of the tube of 12 mm; on the other hand, for the sheet line the width can vary from 300 mm – 600 mm – 1000 mm – 1250 mm, with thicknesses from 6 mm up to 300 mm.

The production of standard imperial system dies for the rod lines starts from a diameter of 0.25” to up to 12”, for perforated rods the diameter starts from 2” to 12” with the opening’s diameter of 1,1/4” up to 11” and a minimum thickness of the tube of 0,5”; on the other hand, for the sheet line the width can vary from 12” – 24” – 40” – 48”, with thicknesses from 0,25” up to 12”.

Additionally, we are able to develop specific projects to accommodate the different requests of our clients by varying the size and structure of our production line in order to adjust them for the handling of different types of materials and to the size of the product which will be mainly extruded.

All of our rod lines are designed for the extrusion of rods and of perforated rods with variable diameter depending on the affixed die, with a yielding of 40/50 kg per hour. Teflon and lapped calibrators of sizes from 5 mm up to 300 mm ( from 0.25” up to 12” ) are available.

In addition to the standard lines mentioned below, it is also possible to create the plant by assembling the different types of extruders, pullers and by adding optional accessories such as ovens, saws, tilt units etc … at the client’s discretion.

All of our sheet lines are designed for the extrusion of sheets and can be fitted for the addition of press units for the quick-change of the production format.

They are also equipped with an aligned stabilization oven which is necessary for the automatic cut of extrused products.

Depending on the chosen die, it is possible to extrude sheets having thickness ranging from 6 mm to 150 mm seamlessly, accumulating the various frames.

In addition to the standard lines mentioned below, it is also possible to create the plant by assembling the different types of extruders, pullers and by adding optional accessories such as saws, stackers etc … at the client’s discretion up to a thickness of 300 mm.

All of our extruders can be equipped with many kind of extrusion dyes for rods and sheets.

The extrusion cylinder’s and the die’s thermal regulation areas and all accessories, such as valves or flow accumulators, are fixed on one electric panel.

All thermal regulation areas can be managed by one synoptic panel along with the extrusion pressure control if they are installed one of our plants or required by the client.

We also build single-screw extruders with or without dynamic mixer. The diameter of the cylinder varies from 32 – 50 – 63 – 75 mm. 25/LD complete with thermal regulators from a minimum of 12 to 32 areas.

All of our extruders are assembled on platforms which have linear tracks to ease maintenance and cleaning.