Please log in
You must be logged in to use matchmaking
Manage stand orders
Select Option
HCI Converting Equipment Co., Ltd.
26, 7th Road Taichung Industrial Park,
40755
Taichung
Taiwan
Taiwan
Location
Hall map
Fairground map
Contact
Terence Chen
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 03 Machinery and equipment for the plastics and rubber industries
- 03.03 Post processing machines and downstream equipment
- 03.03.004 Cutting machines
Cutting machines
- 03 Machinery and equipment for the plastics and rubber industries
- 03.03 Post processing machines and downstream equipment
- 03.03.006 Slitter rewinders
Slitter rewinders
- FSL-TX slitting machine
- FSL-T slitting machine
- FSH-N Heating Side Sealing Slitter
- FSL-KT slitting machine
- FSL-KA slitter rewinders
- FSE series Rewinding & Doctoring Machine
- FSR-600 Rewinding Machine
- FDE-600 Aluminum Foil Rewinding Machine
- FSP-250-2 Reversible Re-Reeling & Doctoring Machine
- FSE-HP / FSE-CP Rewinding & Doctoring / Micro Perforation / Continuous Punching Machine
- FSL-TO series Optical Film Slitting Machine
- FSL-K series Standard Type Slitter/Rewinders
- FSL-BT series Surface Winding Type
- FSL-J series Narrow Width Slitter
- FSL-D series Small Roll Slitter
- FSR-2 series Reversible Rewinding Machine
- FSE-2 series Reversible Rewinding& Doctoring Machine
- 03 Machinery and equipment for the plastics and rubber industries
- 03.03 Post processing machines and downstream equipment
- 03.03.011 Bag and sack making equipment
Bag and sack making equipment
- FTSC-V Stand-Up / Zipper Pouch Making Machine
- FSC-V603-2 Medical Sterilization Pouch/Reel Making Machine
- FKSC-V series Center Seal Bag / Four Side Seal Bag / Gusset Bag Making Machine
- FK/FSC-350 Economical Center Seal / Three Side Seal Bag Making Machine
- FP-250 Shrink Sleeve Seaming Machine
- FP-X250-2 Turret Rewind High Speed Seaming Machine
- FK / FK(PVC) Center Sealing / Glue Sealing Machine
- FSP-250 Shrink Sleeve Re-Reeling & Doctoring Machine
Our products
Product category: Slitter rewinders
FSL-TX slitting machine
800mm Rewind OD slitting machine has been purposely designed for long run requirement, for slitted product OD as large as 800mm. With a hydraulic up/down unwinding stand and an all new rewinding shaft structure, the slitting speed can now reach up to 400m/min. It is suitable for slitting and rewinding of all kind of flexible packaging film, industrial web, electronic material and film roll of uneven thickness.
Web width: 1300mm/1600mm
Unwind Dia. 1000mm (Max.)
Rewind Dia. 800mm (Max.)
Speed: 400mpm / 500mpm
Web width: 1300mm/1600mm
Unwind Dia. 1000mm (Max.)
Rewind Dia. 800mm (Max.)
Speed: 400mpm / 500mpm
Applications
Consumer,
E & E
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Slitter rewinders
FSL-T slitting machine
FSL-T Slitter Rewinder is designed for slitting all types of flexible packaging films, photonics and optical materials. Such as cellophane, PET, OPP, CPP, PE, PVC, paper rolls, counterfeit-proof labels. The HCI FSL-T is a universal Slitter Rewinder on the market.
Web width: 1300mm/1600mm/1800mm
Unwind Dia. 1000mm (Max.)
Rewind Dia. 600mm (Max.)
Speed: 300mpm
Web width: 1300mm/1600mm/1800mm
Unwind Dia. 1000mm (Max.)
Rewind Dia. 600mm (Max.)
Speed: 300mpm
Applications
Consumer
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Slitter rewinders
FSH-N Heating Side Sealing Slitter
FSH-N series Heating Side Seal Slitting Machine is suitable for the slitting and side-sealing process of HDPE, LDPE, PP and CPP, both from sheet form and tube form, also for regular slitting process for flexible packaging applications.
Web width: 1000mm/1200mm/1500mm
Unwind Dia. 600mm (Max.)
Rewind Dia. 450mm (Max.)
Speed: 60mpm(Side Seal) / 100mpm(regular slitting)
Web width: 1000mm/1200mm/1500mm
Unwind Dia. 600mm (Max.)
Rewind Dia. 450mm (Max.)
Speed: 60mpm(Side Seal) / 100mpm(regular slitting)
Applications
Consumer
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Slitter rewinders
FSL-KT slitting machine
The concept of FSL-KT Integration Slitting Machine is a hybrid model which combines the advantages of two HCI best-selling models FSL-T and FSL-K. Unwind and rewind at the same side which provides the convenient operation. Also equipped with 3 vector motors driving and PLC/HMI control system, it’s best choice for short run slitting jobs.
Web width: 1000mm/1300mm/1600mm
Unwind Dia. 800mm (Max.)
Rewind Dia. 450mm (Max.)
Speed: 300mpm
Web width: 1000mm/1300mm/1600mm
Unwind Dia. 800mm (Max.)
Rewind Dia. 450mm (Max.)
Speed: 300mpm
Applications
Consumer
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Slitter rewinders
FSL-KA slitter rewinders
Shaft-less unwind stand.
Shortest web path.
Segment bottom knife block with swing-out type knife shaft, increase the ease of change slitting width.
3-motors driving and PLC/HMI control system.
Web width: 800mm/1300mm/1600mm
Unwind Dia. 800mm (Max.)
Rewind Dia. 500mm (Max.)
Speed: 300mpm
Shortest web path.
Segment bottom knife block with swing-out type knife shaft, increase the ease of change slitting width.
3-motors driving and PLC/HMI control system.
Web width: 800mm/1300mm/1600mm
Unwind Dia. 800mm (Max.)
Rewind Dia. 500mm (Max.)
Speed: 300mpm
Applications
Consumer
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Bag and sack making equipment
FTSC-V Stand-Up / Zipper Pouch Making Machine
Suitable for sealable co-extrusion films, multi-layer films such as laminates of Polyester, BOPP and CPP... The FTSC-V Pouch Making Machine is designed for the production of 3-side sealed bag, doypack, folded bottom gusseted stand-up pouch, zipper pouch and four-side-sealed by 2 separate insertions.
2nd unwinder with web registration system meets the pouch making requirements from narrow web and digital printing line.
2nd unwinder with web registration system meets the pouch making requirements from narrow web and digital printing line.
Applications
Consumer
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Bag and sack making equipment
FSC-V603-2 Medical Sterilization Pouch/Reel Making Machine
Designed for producing pouches and reels for pharmaceutical industries such as Heat Seal Pouches, Self Seal Pouches, Flat / Gusset Sterilization Reels.
- Twin shafts unwind stand.
- Sero-motor with PLC/HMI control system.
- Independent PID thermal controller with heat distribution technique, keeps the temperature within +/- 2.5 ℃ on sealing mold.
- Customized sealing mold pattern with track type docking for easy changing.
- Different options such as gusset bags making, taping and perforation device, water cooling device, conveyor, single or twin shaft rewinder, etc. are all available for customer to build up a medical pouch making machine which most meets his requirement.
Applications
Bags
Target Products
Film/Sheet,
Semisolid,
Flexible/Elastic
Product category: Bag and sack making equipment
FKSC-V series Center Seal Bag / Four Side Seal Bag / Gusset Bag Making Machine
- Main drive and material feeding by servo motor.
- Unwind stand gusseting device; only 3 pieces of mold plate are required to finish all sizes of gusseting.
- Additional gusset forming unit on the main machine for side gusset forming, ironing and pre-heated flatten to enhance the stability of forming and gusseting.
- Photocell for cutting system.
- HMI control system with operation recipe memory.
Applications
Consumer
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Bag and sack making equipment
FK/FSC-350 Economical Center Seal / Three Side Seal Bag Making Machine
Designed for producing light duty pouches, by its simplified structure and shortest web path, most suitable for thin laminated film, co-extrusion film or heat-sealable BOPP material.
With different options can produce various type of bags such as center-sealed bag, center-sealed with gusset bag, two-side-sealed bag, three-side-sealed bags.
With different options can produce various type of bags such as center-sealed bag, center-sealed with gusset bag, two-side-sealed bag, three-side-sealed bags.
- Web width: 720mm (Max.)
- Mechanical speed: 130 cuts/min.
- Bag length: 300mm (web 1-time feeding length)
- Bag width: 30~350 mm
Applications
Consumer
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Bag and sack making equipment
FP-250 Shrink Sleeve Seaming Machine
- Cantilevered unwind 3" air shaft with heavy-duty frame to ensure high speed operation.
- Unwind web guiding system provides the accuracy shrink sleeve seaming position, optional rewind oscillation device can oscillate the seaming area on rewinding.
- Equipped loadcell type tension controllerto assure extremely stable rewinding tension without adjustment when speed and diameter varied.
- Puzzle type forming plates can be combined for producing any width over 50mm sleeves, which greatly bring down the tooling costs in production.
- Both Wheel type (on unwind before forming) and Felt type (on machine after forming) glue applicator are equipped for matching different characters of shrink film and adhesive.
- Optional needle type glue applicator with precision pump as solvent supply system, keep solvent quantity stable and also sync to the operation speed automatically.
- PLC with HMI control system, operation parameters input via touch screen, unwind / rewind tension auto control, auto stop on pre-set length.
- In-line ultrasonic sleeve width measuring device (option) to detect the sleeve width can check the lay-flat width right after seaming process in order to reduce the waste.
- In-line solvent detection device (option) to alert operator for abnormal gluing.
Applications
Consumer
Target Products
Film/Sheet,
Printed/Decorated,
Flexible/Elastic
Product category: Bag and sack making equipment
FP-X250-2 Turret Rewind High Speed Seaming Machine
- Unwind / Rewind Tension Auto Control, equipped with loadcell and dancer roller device, which can eliminate all kinds of tension fluctuation and instantaneous changes caused from auto splicing.
- Equipped full automatic forming device, layflat width above 50mm is free to use forming plate, adjustable sleeve forming table allows manual setting, or upgrade to automatic adjustment system.
- Using laboratory grade precision pump as solvent supply system, keep solvent quantity stable and also sync to the operation speed automatically.
- Turret Rewinder equipped with two rewinding air shafts, when the finished product reached the pre-set length or diameter, the machine will automatically turret and splice, significantly reduce the machine stops and improve production efficiency.
- Seaming & Doctoring Two-In-One: FP-X series seamer can be equipped with ultrasonic layflat width detection, and solvent detection feature, both can be set alert or automatic shutdown. (option)
Applications
Consumer
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Bag and sack making equipment
FK / FK(PVC) Center Sealing / Glue Sealing Machine
- This machine is designed for the production of poly bags (center sealing) or shrink label (seaming), together with FSC series sealing/cutting machine to complete the production.
- Simplified design, easy to operate and maintain, it’s the most economy entry level equipment for producing poly bags or shrink labels.
- Swing out type unwind air shaft. Single operator is required to manipulate and load the parent roll, cantilevered paper core or five-claw corelesswinder upon request.
- Main drive AC motor provides variable speeds to accommodate a variety of materials.Rewind TQ motor provides the stable winding tension.
- FK series equipped with 2 set of thermal controller for pre-heating and sealing blade, pressed by embossing wheel for continuous sealing to have perfect sealing.
- FK(PVC) series equipped with glue feeding adjust magnet valve and flow quantity regulator to control the glue and blower for drying the solvent faster also increasing the production speed.
- Various options such as stroboscope, continuous perforation and rewind oscillation, etc. are available.
Applications
Consumer
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Cutting machines
FSC-201 Cutting Machine
This cutting machine is suited for perforating and cutting operations for various shrink labels or electronic material and optical film.
- Cantilever unwind shaft for easy operation.
- The AC motor driven with unwind dancing roller unit to assures the most stable web feeding.
- The cutting length is accurately controlled by servo motor incorporated with a German made photocell sensor for greatly upgrading the production speed.
- Equipped with perforating device which can easily adjust the pressure and position.
- Various cutting edge for flat label and special jaw for cap seal are available, together with conveyor can set the accumulation stocking and moving distance.
- HMI control system with complete operation functions like auto counting, accumulative recording, auto-stop function for photocell ineffective, etc.
- Optional continuous perforation and products rewinding device are available for machine function expanded.
Applications
E & E
Target Products
Film/Sheet,
Transparent,
Semisolid,
Flexible/Elastic
Product category: Slitter rewinders
FSE series Rewinding & Doctoring Machine
- Single winding direction, entry level rewinding/inspection machine.
- Equipped with air shaft unwind stand and web guiding system keeps products edge alignment.
- Two pieces of large OD rubber roller for main drive to prevent the scratches occurred.
- Powder clutch for rewind tension control.
- Equipped with inspection board and fluorescent lamps for visual checking.
- Equipped with defective material winder which can wind the waste web onto directly.
Product category: Slitter rewinders
FSR-600 Rewinding Machine
- Unwind and rewind on the same side, easy to access rewinding operation for correction of reel edge or uneven tension.
- Swing out designed unwind and rewind shafts can be easily handled by a single operator.
- Equipped with high precision web guiding system to turn the defective products into qualified products.
- Equipped with fine adjustment pivot guide web guiding system to turn the defective rolls into qualified products.
- Loadcell type of auto tension controller keeps the rewinding tension constantly.
- Rewind tracing roller mechanism which can vary with rewind diameter to maintain the same winding angle. This mechanism can improve the rewinding quality greatly.
- PLC with HMI control system, touchscreen for parameter memory and auto stop at pre-set length.
Product category: Bag and sack making equipment
FSP-250 Shrink Sleeve Re-Reeling & Doctoring Machine
- Designed for shrink sleeve seaming and printing inspection, it is indispensable process prior to automatic label inserting machine.
- Cantilevered unwind and rewind shafts, for 3” and 6” core or coreless winder are available.
- Motor driven rewinder with tension auto control system keeps the tension constantly.
- EPC web guider equipped on rewind side to ensure the product edge alignment.
- Various options such as inflation seaming check, stroboscope, perforation, rewind oscillation, etc. are available.
Applications
Consumer
Target Products
Film/Sheet,
Printed/Decorated,
Flexible/Elastic
Product category: Slitter rewinders
FDE-600 Aluminum Foil Rewinding Machine
- Designed for rewinding and distributing big rolls of aluminum foil into small ones.
- Swing out type unwind stand, single operator is required to operate the machine.
- Auto rewinding shafts exchanging mechanism provide the nonstop production.
- Flexible accommodation of paper cores in various diameters.
- Equipped with meter counter which can stop the machine automatically when preset length reached.
Product category: Slitter rewinders
FSP-250-2 Reversible Re-Reeling & Doctoring Machine
- Cantilevered unwind air shaft for quick change over, the roll diameter can reach to 700mm with 2 different web path for inspection of printing defects or seaming quality.
- Both unwind and rewind by motor driven, allow the winding directionchanged during operation. Load cell type tension controller to ensure the rewinding tension stable.
- Equipped with web guiding system (forward direction) creates an extremely neat edge, also can have extra ultrasonic sensor upgrading to CPC central guiding and SPC oscillation function.
- Equipped with observed board and fluorescent lamps for visual checking, also can have air inflation checking system (option) for checking seaming quality.
- HMI touch screen control panel for tension setting, parameters memory, preset meters stop andmemory reverse function.
- On-line web width measuring system and camera full inspection device are available (option), machine width can be upsize to 500mm upon request.
Product category: Slitter rewinders
FSE-HP / FSE-CP Rewinding & Doctoring / Micro Perforation / Continuous Punching Machine
Optional thermostatic control hot needle micro perforation device is available.
- Equipped with a well-insulated temperature control box provides stable temperature to the needle roller both internally and externally by thermal controller.
- Segment type needle sleeve can be rearranged to set different width and pitch for different patterns.
Optional continuous punching device is available, the punching positions can be adjusted programmatically. (Hole Dia. 2mm~50mm)
- Equipped with a well-insulated temperature control box provides stable temperature to the needle roller both internally and externally by thermal controller.
- Segment type needle sleeve can be rearranged to set different width and pitch for different patterns.
Optional continuous punching device is available, the punching positions can be adjusted programmatically. (Hole Dia. 2mm~50mm)
Product category: Slitter rewinders
FSL-TO series Optical Film Slitting Machine
- Specially designed for slitting a variety of optical film such as diffuser film, backlight film, prism film, brightness enhancement film, reflection film and all kinds of PET mono-layer and multi-layer film for TFT-LCD production.
- It offers scratch-free slitting and accurate length measurement in each slit roll. The designs of slitter are suitable for use in the clean room environments.
- Four motors controlled system : Unwind, main drive and rewinds are all equipped with AC motor, more accurate tension control and better product quality.
- Shaft less unwind stand with pneumatic chuck offers efficient material loading. The maximum load of the unwind stand can reach up to 1ton.
- Dual slitting system with razor blade and shear knife to meet the slitting needs of different type of material.
- Double-sided sticky roller device: it is a stick and transfer system. The sticky rubber roller and sticky paper roller could be raised or lowered, controlled by independent air cylinder. The transfer- sticky paper roll is held in place by air shaft and makes cleaning and replacing speedy.
- 6” rewind air shaft : lift out design with safety chuck to extend the production life of the shaft and offers a more convenient and safer for the roll unloading.
- PLC programmable logic control system: with color LCD HMI touch screen and memory function to save all the process parameters. It also provides the functions of material run out alarm, material break auto stop and length reach auto stop.
Applications
Miscellaneous,
Consumer Goods
Target Products
Film/Sheet,
Transparent,
Flexible/Elastic
Product category: Slitter rewinders
FSL-K series Standard Type Slitter/Rewinders
- Unwinding and rewinding on the same side, easy accessibility to setting operations.
- Equipped floating unwind stand with standard specification, varies of separate unwind stand are also available.
- Web tension controlled by powder brake (unwind) and clutch (rewind), easy to access operation.
- Cantilevered rewinding shaft with friction ring enhance quick changeover ability.
Product category: Slitter rewinders
FSL-BT series Surface Winding Type
- For slitting thin and slip plastic films of uniform thickness, such as laminating paper, aluminum foil, liner and other paper rolls.
- By surface winding shafts, rewinding right after slitting to ensure products edge alignment.
- Two rewinding shafts controlled by separate motors for tension control.
- Rewind shafts auto rising/lowering mechanism helps unload heavy rolls.
- Onboard blower and winder for trim removal.
- PLC with graphical interface HMI control panel to provide accurate and stable tension including unwind tension auto control, rewind tension auto control, recipe memory and machine auto stop by achieving pre-set rewind OD or length.
Product category: Slitter rewinders
FSL-J series Narrow Width Slitter
- For narrow web slitting of all kinds of high grade thin paper, cellophane, plastic film and aluminum foil. Especially suitable for positive and negative foils of condenser and electrolyze paper.
- By surface winding shafts to ensure products edge alignment.
- The rollers are tightly arranged to decrease tolerance of cross and longitudinal winding of material to have excellent winding stability.
- The winding and feeding motions are driven by a universal satellite gear transmission. The speed can be easily varied to accommodate tension difference caused by the changing diameter of the winding material.
- Rewinding shafts quick changeover design to save set up time of each slitting jobs, shaft size can be customized upon requested.
- Minimum slitting width can narrow to 5mm (option).
Applications
Miscellaneous
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Slitter rewinders
FSL-D series Small Roll Slitter
- This machine is ideal for slitting large parent rolls into small bobbin rolls for the applications of POS, ATM, cash register, ticket/receipt, thermal paper, fax, lottery, medical report and various office use paper rolls.
- Shear knife cutter suitable for paper roll slitting.
- Lift-out type rewinding shafts for quick changeover, shaft sizeupon request.
- By using patented magnetic powder typesurface rewinding design allowing product tension to be easilyadjusted according to material type. It also reduces wearon thedriving rubber roller.
- End roll warning device, for reminding the user to change theroll when the warning mark appeared.
- Varies options such as pneumatic controlled lay-on roller, products discharging table and paper auto insertion device are available.
Product category: Slitter rewinders
FSR-2 series Reversible Rewinding Machine
- Cantilever with shortest web path compact design, for correction of the edge alignment and tension of slit roll.
- Both unwind and rewind equipped with servo-motor for precise tension control. The winding direction can be changed any time with forward /reverse jogging functions.
- Pivot Frame Web Guiding Systemsto keep web material properly aligned during processing, convert the NG roll to pass QC.
- PLC & HMI touch control system with rewind tension manual / Auto mode, web running out and pre-set length Auto stop, Auto reverse to memory point functions.
- Various width and options are available.
- Dancing roller device suitable for stretch and tension sensitive film.
- Splice table with stroboscope for print inspection and quality control.
- Razor cutter for trimming process.
Product category: Slitter rewinders
FSE-2 series Reversible Rewinding& Doctoring Machine
- Inspection of printing or lamination defects, also for re-reeling operation of slit rolls with uneven edge or tension.
- Both unwind and rewind equipped with servo-motor for precise tension control. The winding direction can be changed any time with forward / reverse jogging functions.
- Equipped with shaftless unwind stand and web guiding system keeps products edge alignment, rewind air shaft with pneumatic controlled lay-on roller, different width reel can be rewound without changing lay-on roller width which makes ease and rapid job changes in operation.
- Equipped with inspection board and stroboscope for visualchecking.
- 100% camera inspection and labeling device are available (option), instead of vision inspection by human eyes to get zero defect finish products.
- PLC & HMI touch control system with rewind tension manual / Auto mode, web running out and pre-set length Auto stop, Auto reverse to memory point functions.
- Defects area memory and auto reverse function, operator can reverse the roll to defected point immediately or reverse it till whole roll rewinding completed.
- Optional razor cutter for trimming process.
Applications
Consumer
Target Products
Film/Sheet,
Printed/Decorated,
Flexible/Elastic
Product category: Cutting machines
FSC-G Rigid Film Flatten & Sheeting Machine
- Designed to flatten and slice various kinds of plastic and paper. Maximum thickness of materials can reach 2mm.
- Equipped with 3 heating drums, flatten films can be neatly flattened and smoothed on both side evenly.
- Employs an automatic thermo-controlled heated oil circulation system, high heating efficiency with uniform temperature distribution.
- Numerically controlled stepping motor provides very accurate positioning and cutting, and reduces errors to a minimum.
- The cutter is hydraulically controlled without further adjustment for cutting thick and thin materials. Durable blade provides clean and long lasting cutting performance.
- Operation panel with touch screen for operation parameter input including cutting length, speed, auto counting, accumulative recording, auto-stop function for photocell ineffective, etc.
Product category: Cutting machines
FEM series Embossing Machine
- Designed for surface embossing process of aluminum-plated paper, metalized film, aluminum foil to be used on beer labels, tobacco packaging, envelops and packaging box, etc. to upgrade outlook effect and product quality level.
- Equipped with banana roller and adjustable aluminum roller to facilitate web parallel without wrinkles.
- Upper steel embossing roller is hydraulic operated, with micro-adjustment for accurate embossing gap to have clear pattern and consistent grain depth.
- Lower backing roller can be polymer roller or wool paper roller depends on the embossing pattern.
- By using single shaft surface winding, consistent tension and edge alignment control to reduce products damage and highly improve production efficiency.
Applications
Consumer
Target Products
Film/Sheet,
Shiny,
Printed/Decorated,
Structured,
Flexible/Elastic,
Information
About us
Company portrait
HCI Converting Equipment Co., Ltd. is a specialist in the design and manufacture of a full range of Converting Equipment in Taiwan for Flexible Package, Label Stock, Shrink Sleeve, Medical and Semi-Conductor, TFT-LCD related industries. From Slitting Machine, Rewinding / Inspection Machine, Seaming / Doctoring Machine, Cutting Machine, Laminating Machine and Bag / Pouch Making Machine to whole plant equipment. Based on 37 years manufacturing experience, HCI always provides customers with the most comprehensive technology services at competitive prices.