Eurochiller S.r.l.
Via Milano, 69,
27030
Castello d'Agogna (PV)
Italy
Italy
Location
Hall map
Fairground map
Contact
Our range of products
Product categories
- 03 Machinery and equipment for the plastics and rubber industries
- 03.09 Ancillary equipment
- 03.09.002 Heating and cooling technology
- 03.09.002.01 Heating and cooling units
Heating and cooling units
- ADcooler - Adiabatic coolers - Cooling capacity 82/1220 kW
- ICEtemp - Precision, water cooled chillers to be placed beside the machine - Cooling capacity 4/98 kW
- ABFevo INVERTER - Direct expansion water cooled chillers for blown film lines - Cooling capacity 29/177 kW
- 3FLOWSevo - Water and oil temperature control units - Heating capacity 3/24 kW
- MAXY - Water temperature control units - Heating capacity 3/24 kW
- 3FLEX - Water (up to 160°C) temperature control units - Heating capacity 3/12 kW
- 03 Machinery and equipment for the plastics and rubber industries
- 03.09 Ancillary equipment
- 03.09.002 Heating and cooling technology
- 03.09.002.02 Water chillers
Water chillers
Our products
Product category: Heating and cooling units, Water chillers
ADcooler - Adiabatic coolers - Cooling capacity 82/1220 kW
For some time the manufacturers of cooling equipment are questioning how to contribute to the reduction of energy consumption into their products and to consequently reduce the emission of CO2 into the environment.
Eurochiller fulfils this need with a totally revolutionary unit called ADcooler (Adiabatic cooler), which combines the energy savings provided by a dry-cooler battery with the thermal efficiency provided by an adiabatic system. ADcooler is applicable to all industrial processes, ensuring temperatures close to the wet bulb value.
STRUCTURE : Structure manufactured from pre-painted galvanized steel suitable for outdoor installation
ADIABATIC SYSTEM : The adiabatic system is placed on the two sides of the unit with a wider surface if compared to that of the heating exchange coils. The quantity of water to attain the adiabatic result is run by a patented control
HEAT EXCHANGE COILS : Copper/aluminium
SELF-DRAINING VERSION : Optional. It allows the operation of the unit without glycol
CONTROL : Microprocessor control
CERTIFICATE : CE
Eurochiller fulfils this need with a totally revolutionary unit called ADcooler (Adiabatic cooler), which combines the energy savings provided by a dry-cooler battery with the thermal efficiency provided by an adiabatic system. ADcooler is applicable to all industrial processes, ensuring temperatures close to the wet bulb value.
STRUCTURE : Structure manufactured from pre-painted galvanized steel suitable for outdoor installation
ADIABATIC SYSTEM : The adiabatic system is placed on the two sides of the unit with a wider surface if compared to that of the heating exchange coils. The quantity of water to attain the adiabatic result is run by a patented control
HEAT EXCHANGE COILS : Copper/aluminium
SELF-DRAINING VERSION : Optional. It allows the operation of the unit without glycol
CONTROL : Microprocessor control
CERTIFICATE : CE
Product category: Heating and cooling units, Water chillers
ICEtemp - Precision, water cooled chillers to be placed beside the machine - Cooling capacity 4/98 kW
ICEtemp is a water cooled chiller for inside installation suitable for the precise temperature control of injection moulds.
The main features of the ICEtemp are as follows:
-) accurate temperature control (+/-0,1°C) at the mould
-) facility to provide high water flow rate
STRUCTURE : Self-standing made of prepainted sheet
COMPRESSOR : Scroll, refrigerant R407c
CONDENSERS : Inspectable shell and tube
EVAPORATOR : Brazed-plate
TANK : Stainless steel
PUMP : Horizontal, stainless steel, multi-stage pumps
TEMPERATURE CONTROL CIRCUIT : Consisting of electric heaters with modulating valve for accurate temperature control (+/- 0,1°C)
CONTROL : 7” touch-screen panel with customized PLC
CERTIFICATE : CE - PED
EXTRA : The series complies with the ECOdesign directive
The main features of the ICEtemp are as follows:
-) accurate temperature control (+/-0,1°C) at the mould
-) facility to provide high water flow rate
STRUCTURE : Self-standing made of prepainted sheet
COMPRESSOR : Scroll, refrigerant R407c
CONDENSERS : Inspectable shell and tube
EVAPORATOR : Brazed-plate
TANK : Stainless steel
PUMP : Horizontal, stainless steel, multi-stage pumps
TEMPERATURE CONTROL CIRCUIT : Consisting of electric heaters with modulating valve for accurate temperature control (+/- 0,1°C)
CONTROL : 7” touch-screen panel with customized PLC
CERTIFICATE : CE - PED
EXTRA : The series complies with the ECOdesign directive
Product category: Heating and cooling units, Water chillers
ABFevo INVERTER - Direct expansion water cooled chillers for blown film lines - Cooling capacity 29/177 kW
ABFevo-INVERTER represents the state of the art in cooling technology for air blown film lines and is essential for the most effective processing of the product.
STRUCTURE made of steel panels painted with polyester powders
EVAPORATORr with hydrophilic fins
DROPS SEPARATOR with built-in air filter
Highly efficient Scroll COMPRESSORS (refrigerant R407c)
MODULATING VALVE with hot gas by-pass system (HGBP)
NEW INVERTER control allowing an intelligent control of the cooling capacity
Inspectable shell & tube CONDENSERS
PRESSURE SWITCH VALVE adjusting the condensing water flow rate according to the working conditions
ELECTRIC PANEL manufactured to IP54
Multi-function MICROPROCESSOR CONTROL PANEL with 7 “touch screen display with simple and intuitive graphic symbols
CERTIFICATES: CE – PED
PLUSES:
STRUCTURE made of steel panels painted with polyester powders
EVAPORATORr with hydrophilic fins
DROPS SEPARATOR with built-in air filter
Highly efficient Scroll COMPRESSORS (refrigerant R407c)
MODULATING VALVE with hot gas by-pass system (HGBP)
NEW INVERTER control allowing an intelligent control of the cooling capacity
Inspectable shell & tube CONDENSERS
PRESSURE SWITCH VALVE adjusting the condensing water flow rate according to the working conditions
ELECTRIC PANEL manufactured to IP54
Multi-function MICROPROCESSOR CONTROL PANEL with 7 “touch screen display with simple and intuitive graphic symbols
CERTIFICATES: CE – PED
PLUSES:
- The new INVERTER control contains all the modules required to comply with the EMC (Electro Magnetic Compatibility) regulations and offers features improving the efficiency and the reliability of the product. The INVERTER allows an accurate control of the air temperature (+/- 0,1°C) and a high optimization of energy consumption.
- Direct free-cooling with AMK (optional) activated thanks to the cooling of the air through the exchange with colder air. The reduction of the energy consumption is granted and becomes more advantageous, the longer the external air temperature is lower than the one required for the desired cooling.
Target Products
Film/Sheet,
Flexible/Elastic
Product category: Heating and cooling units
3FLOWSevo - Water and oil temperature control units - Heating capacity 3/24 kW
STRUCTURE : Structure with removable side-panels and a front handle, large rear wheels and front feet to ensure stability
HEATER : Forced flow heater with integrated air breather
EXCHANGER : Plates (optional)
PUMP : Low noise centrifugal pump
TANK : 3FLOWSevo-A/O: stainless steel open internal tank, capacity 12 lt - 3FLOWSevo-P: galvanized steel internal expansion tank, capacity 5 lt
BY-PASS : Internal, hydraulic safety by-pass
PIPES : Multilayer plastic material pipes
AIR DISCHARGE : 3FLOWSevo-A/P: Automatic - 3FLOWSevo-O: Automatic air overflow on filling by solenoid valve
FILLING : Automatic, independent filling system (only 3FLOWSevo-A/P)
CONTROL : Gefran 650 control system with digital display and COOLDOWN SOFTWARE (automatic cooling cycle when the pump switches off)
CERTIFICATE : CE
HEATER : Forced flow heater with integrated air breather
EXCHANGER : Plates (optional)
PUMP : Low noise centrifugal pump
TANK : 3FLOWSevo-A/O: stainless steel open internal tank, capacity 12 lt - 3FLOWSevo-P: galvanized steel internal expansion tank, capacity 5 lt
BY-PASS : Internal, hydraulic safety by-pass
PIPES : Multilayer plastic material pipes
AIR DISCHARGE : 3FLOWSevo-A/P: Automatic - 3FLOWSevo-O: Automatic air overflow on filling by solenoid valve
FILLING : Automatic, independent filling system (only 3FLOWSevo-A/P)
CONTROL : Gefran 650 control system with digital display and COOLDOWN SOFTWARE (automatic cooling cycle when the pump switches off)
CERTIFICATE : CE
Product category: Heating and cooling units
MAXY - Water temperature control units - Heating capacity 3/24 kW
STRUCTURE : Self-standing, on castors, with removable side-panels
HEATER : Immerse
EXCHANGER : Plates
PUMP : Submersible peripheral pump (reverse function: optional)
TANK : Stainless steel tank, capacity 25 lt
FILLING : Automatic, independent filling system with filter
CONTROL : Gefran 650 control system with digital display and PID function during heating/cooling phases
CERTIFICATE : CE
HEATER : Immerse
EXCHANGER : Plates
PUMP : Submersible peripheral pump (reverse function: optional)
TANK : Stainless steel tank, capacity 25 lt
FILLING : Automatic, independent filling system with filter
CONTROL : Gefran 650 control system with digital display and PID function during heating/cooling phases
CERTIFICATE : CE
Product category: Heating and cooling units
3FLEX - Water (up to 160°C) temperature control units - Heating capacity 3/12 kW
3FLEX-P - Water up to +140°C
STRUCTURE : Structure with removable side-panels made of painted steel with castors
HEATER : Heater controlled by solid state relays (SSR)
EXCHANGER : Plates
PUMP : Low noise centrifugal pump
TANK : Stainless steel open expansion tank, capacity 12 lt with automatic pressurization over 80°C
3-WAY VALVE : 3-way modulating valve on process side with antiscale function (optional)
BY-PASS : Internal, hydraulic -safety by-pass
AIR DISCHARGE : Automatic with solenoid valve
FILLING : Automatic, independent with solenoid valve
CONTROL : PLC control system with 4.5 "touch screen panel and COOLDOWN SOFTWARE (automatic cooling cycle when the pump switches off)
PLUS : Pressure transducers for the digital control of the flow rate and of the working pressure - Inverter pump (optional)
CERTIFICATE : CE
3FLEX-HP - Water up to 160°C
STRUCTURE : Structure with removable side-panels made of painted steel with castors
HEATER : Heater controlled by solid state relays (SSR)
EXCHANGER : Plates
PUMP : Magnetic drive peripheral pump
TANK : Stainless steel open expansion tank, capacity 12 lt with automatic pressurization over 80°C
3-WAY VALVE : 3-way modulating valve on process side with antiscale function
BY-PASS : Internal, hydraulic safety by-pass
AIR DISCHARGE : Automatic with solenoid valve
FILLING : Automatic, independent with solenoid valve
CONTROL : PLC control system with 4.5 "touch screen panel and COOLDOWN SOFTWARE (automatic cooling cycle when the pump switches off)
PLUS : Pressure transducers for the digital control of the flow rate and of the working pressure - Inverter pump (optional)
CERTIFICATE : CE
STRUCTURE : Structure with removable side-panels made of painted steel with castors
HEATER : Heater controlled by solid state relays (SSR)
EXCHANGER : Plates
PUMP : Low noise centrifugal pump
TANK : Stainless steel open expansion tank, capacity 12 lt with automatic pressurization over 80°C
3-WAY VALVE : 3-way modulating valve on process side with antiscale function (optional)
BY-PASS : Internal, hydraulic -safety by-pass
AIR DISCHARGE : Automatic with solenoid valve
FILLING : Automatic, independent with solenoid valve
CONTROL : PLC control system with 4.5 "touch screen panel and COOLDOWN SOFTWARE (automatic cooling cycle when the pump switches off)
PLUS : Pressure transducers for the digital control of the flow rate and of the working pressure - Inverter pump (optional)
CERTIFICATE : CE
3FLEX-HP - Water up to 160°C
STRUCTURE : Structure with removable side-panels made of painted steel with castors
HEATER : Heater controlled by solid state relays (SSR)
EXCHANGER : Plates
PUMP : Magnetic drive peripheral pump
TANK : Stainless steel open expansion tank, capacity 12 lt with automatic pressurization over 80°C
3-WAY VALVE : 3-way modulating valve on process side with antiscale function
BY-PASS : Internal, hydraulic safety by-pass
AIR DISCHARGE : Automatic with solenoid valve
FILLING : Automatic, independent with solenoid valve
CONTROL : PLC control system with 4.5 "touch screen panel and COOLDOWN SOFTWARE (automatic cooling cycle when the pump switches off)
PLUS : Pressure transducers for the digital control of the flow rate and of the working pressure - Inverter pump (optional)
CERTIFICATE : CE
Company news
Date
Topic
Download
Sep 9, 2019
Ecological cooling
We recently completed the installation of the 1st step of a system consisting of ADY-NAX air cooled chillers coupled to ADcooler adiabatic coolers, both supplied with self-draining execution, providing for 4 MW cooling capacity.
The energy savings solution above allows the Slovenian end-user to work without glycol thus boosting the cooling peformances and significantly reducing costs, whilst safeguarding the environment.
The energy savings solution above allows the Slovenian end-user to work without glycol thus boosting the cooling peformances and significantly reducing costs, whilst safeguarding the environment.
About us
Company details
Established in 1990, Eurochiller is today a group which comprises industry leading specialist companies that come together to offer its customers world class products and services of the highest quality. Our teams of experts deliver innovative solutions and provide specialist skills for cutting edge projects.
Company data
Sales volume20 - 100 Mill. US $
Export contentmax. 50%
Number of employees101 - 500
Foundation1988
Area of businessMachinery and equipment for the plastics and rubber industries
Target groups- Plastic product manufacturing
- Rubber manufacturing / processing
- Agriculture