Eltex-Elektrostatik GmbH of Weil am Rhein at K 2019 in Düsseldorf -- K Trade Fair

Eltex-Elektrostatik GmbH

Blauenstr. 67-69, 79576 Weil am Rhein
Germany
Telephone +49 7621 7905422
info@eltex.de

Hall map

K 2019 hall map (Hall 10): stand H38

Fairground map

K 2019 fairground map: Hall 10

Contact

Marc Rechberger

Sales Manager Static Control

Eltex-Elektrostatik-GmbH
Blauenstraße 67-69
79576 Weil am Rhein, Germany

Phone
+49 7621 7905-404

Email
marc.rechberger@eltex.de

Walter Schwarzwälder

Sales Manager Grounding

Eltex-Elektrostatik-GmbH
Blauenstraße 67-69
79576 Weil am Rhein, Germany

Phone
+49 7621 7905-425

Email
walter.schwarzwaelder@eltex.de

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.04  Machinery and plant for finishing, decorating, printing and marking
  • 03.04.009  Equipment for In-Mould-Labeling (IML)
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Ancillary equipment
  • 03.09.004  Dust and fume extraction systems / Dedusting systems
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Ancillary equipment
  • 03.09.010  Electrostatic systems

Our products

Product category: Dust and fume extraction systems / Dedusting systems

Fokus K2019: Effective cleaning and discharging with Eltex Ion Blower Technology

Eltex electrostatic cleaning systems optimize production by removing interfering particles, dust and electrostatic charges from a wide variety of surfaces with the use of compressed air. Effective cleaning and discharge ensures a smooth-running production process.

The spectrum ranges from stationary systems with ion blower nozzles for smaller, precise cleaning of surfaces to the SCC  leaning station for larger distances and better cleaning performance thanks to rotating nozzles. Eltex also offers manual systems using blow pistols and nozzles to cleaning small 3D parts to large components (bumpers, film wraps, etc.). Eltex also offers solutions for Ex areas.

More Less

Product category: Dust and fume extraction systems / Dedusting systems

Eltex Ion Blower Nozzles and Pistols for Cleaning and Dedusting

Eltex Ion Blower Nozzles and Pistols for cleaning and dedusting
Compared with similar products, the ion blower technology delivers higher ionization power and a larger ionizing range. While the ion blower nozzles and the ion blower nozzle bar are fixed in place, the ion blower pistols show their true strength in hand-held use.
The compact design and the high effectiveness of the unit allow a variety of different uses and applications.

More Less

Product category: Dust and fume extraction systems / Dedusting systems

Eltex STATIC COMBI CLEANER - Dynamic ionizing blow-off station

Static Combi Cleaner SCC is a highly effective ionizing blowing station for contact-free removal of undesirable dust and dirt deposits on three-dimensional or structured surfaces. Statically adhesive dust is discharged and blown off by pulsating air jets. Effective removal of electrostatic charges from the cleaned surface prevents fast re-contamination of the products. The Static Combi Cleaner is ideal for drying workpieces and tools.

More Less

Product category: Electrostatic systems

Eltex flexION R60 and flexION R60 air

Eltex flexION R60 and flexION R60 air
The Series R60 discharging bars flexION are designed for the active discharging of disruptive static charges which develop in production processes.The bars are operated with an alternating voltage of 5 kV at 50 / 60 / 100 Hz and are designed for discharging moving and non moving surfaces.
Due to differences in the sur-face charge profiles on diffe-rent materials, charges with both polarities are provided by the discharging bars.

The advantages of the flexION discharging bars:
  • high discharge range at minimum operating high voltage, hence great depth effect
  • excellent active dis-charging performance at close and far range due to patented bar design
  • flexible, free-standing emission tip with new resistance technology, no danger of injury, e.g. during cleaning
  • 4 times more emission tips compared to other products
  • high level of safety due to passive discharge even when the power supply is off
  • variable use in tight, grounded machine spaces
  • easy to clean thanks to an extremely hard, dirt-resistant surface

More Less

Product category: Electrostatic systems

Eltex Discharging Systems

The discharging process is always used when materials are electrostatically charged within a process. Interference can result from uncontrolled discharges. There are no longer any unpleasant side effects resulting from operating personnel making contact with charged materials.

Eltex Discharging Systems
Discharge electrodes for different distances, production speeds and connected loads.

Eltex Discharge electrodes for different distances, production speeds and connected loads.

Eltex Power supplies for AC discharges in different power levels and adapted to the customer application.

Eltex Ion Blower Heads, Blower Nozzles and Pistols for large surface areas and point-to-point discharging and dedusting. Air support guaranteeing a high degree of efficiency even across large distances.

More Less

Product category: Equipment for In-Mould-Labeling (IML), Electrostatic systems

NEW: Eltex High Voltage Generator POWER CHARGER

The POWER CHARGER PCSC high voltage generator is a universal high voltage supply unit for controlled charging and use of electro-static effects.

All generators of the POWER CHARGER PCSC family offer the following features:
  • Up to 50% higher charging power than comparable Eltex charging generators
  • Parallel control of charging voltage, charging current and charging capacity
  • Temperature-controlled power limitation
  • Robust, compact design
  • Easy installation
  • Low weight
  • Industry-grade high voltage plug connection
  • Integrated function and error monitoring
  • LED display for visualiza-tion of the operating status
  • Touchscreen operation (optional)
  • Easy setup via an analog interface
  • Integration of the generator into CANopen® net-works
  • Industrial Ethernet support

More Less

Product category: Electrostatic systems, Equipment for In-Mould-Labeling (IML)

Eltex Charging Systems

Eltex Charging Systems
Electrostatic charging is used when products are electrostatically adhered together for a limited time to improve a production process (e.g. For example, in the plastics industry the "neck-in" can be eliminated by the targeted use of point charging electrodes.

Eltex Charging Electrodes
Heavy-duty and precise bars for targeted charging

Eltex High Voltage Generators
Universally useable power supply units for Eltex charging electrodes

More Less

Company news

Date

Topic

Download

Aug 21, 2019

Press Release K2019

More Less

May 17, 2019

Eltex Company profile

Eltex-Elektrostatik-GmbH in Weil am Rhein, Germany, is a leading manufacturer of electrostatic systems. For more than 60 years, Eltex has focused on one thing: using electrostatics to optimize production processes where they are needed and effectively eliminating them where they have undesirable consequences. 

Electrostatic systems from Eltex enable higher production speeds, more efficient work, significantly improved quality, reduced energy consumption, fewer disruptions and minimized downtime and waste.

Competent advice from our experienced application engineers, problem analyses and solutions are our core competence.

Our global presence is provided by an international sales network of 50 representatives.

More Less

About us

Company data

Sales volume

5 - 20 Mill. US $

Export content

max. 50%

Number of employees

31 - 100

Foundation

1953

Area of business

Machinery and equipment for the plastics and rubber industries

Target groups
  • Plastic product manufacturing
  • Chemical industry
  • Machinery construction
  • Packaging / distribution
  • Vehicle construction / aerospace
  • Electronics / electro technology
  • Medical technology / precision engineering / optics
  • Other industries