Labtech Engineering Co., Ltd. of Samutprakarn at K 2019 in Düsseldorf -- K Trade Fair

Labtech Engineering Co., Ltd.

Bangpoo Industrial Estate, 818 Moo 4 Soi 14B, Suhkumvit Rd, Praksa, Muang, 10280 Samutprakarn
Thailand

Hall map

K 2019 hall map (Hall 7, level 1): stand C37

Fairground map

K 2019 fairground map: Hall 7, level 1

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.001  Mixers
  • 03.01.001.03  Mixers, batch type, for solids

Mixers, batch type, for solids

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.006  Pelletizers

Pelletizers

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.009  Compounding lines
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.02  Single screw extruders

Single screw extruders

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.03  Twin screw extruders
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.06  Extrusion lines
  • 03.02.001.06.01  Extrusion lines for blown film
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.06  Extrusion lines
  • 03.02.001.06.02  Extrusion lines for flat film and sheets

Extrusion lines for flat film and sheets

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.06  Extrusion lines
  • 03.02.001.06.03  Extrusion lines for tapes

Extrusion lines for tapes

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.06  Extrusion lines
  • 03.02.001.06.04  Extrusion lines for mono- and multifilaments

Extrusion lines for mono- and multifilaments

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.06  Extrusion lines
  • 03.02.001.06.05  Extrusion lines for pipes and profiles

Extrusion lines for pipes and profiles

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.06  Extrusion lines
  • 03.02.001.06.06  Extrusion lines for laminating and coating

Extrusion lines for laminating and coating

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.06  Extrusion lines
  • 03.02.001.06.07  Extrusion lines for sheathing of pipes and cables

Extrusion lines for sheathing of pipes and cables

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  • 03.02.001.06  Extrusion lines
  • 03.02.001.06.08  Extrusion lines for flexible hoses

Extrusion lines for flexible hoses

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.003  Blow moulding machines
  • 03.02.003.01  Extrusion blow moulding machines
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.003  Blow moulding machines
  • 03.02.003.02  Extrusion stretch blow moulding machines
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.004  Presses
  • 03.02.004.01  Compression moulding machines and transfer moulding machines
  • 03.02.004.01.01  Compression and transfer moulding presses for plastics

Compression and transfer moulding presses for plastics

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.004  Presses
  • 03.02.004.01  Compression moulding machines and transfer moulding machines
  • 03.02.004.01.02  Compression and transfer moulding presses for rubber

Compression and transfer moulding presses for rubber

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.006  Calenders

Calenders

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.008  Sheet casting machines

Sheet casting machines

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Process automation
  • 03.07.007  Material handling
  • 03.07.007.05  Dosing and metering equipment
  • 03.07.007.05.01  Volumetric dosing and metering equipment

Volumetric dosing and metering equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.07  Process automation
  • 03.07.007  Material handling
  • 03.07.007.05  Dosing and metering equipment
  • 03.07.007.05.02  Gravimetric dosing and metering equipment

Gravimetric dosing and metering equipment

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.09  Ancillary equipment
  • 03.09.007  Melt pumps

Melt pumps

Our products

Product category: Extrusion lines for blown film

MULTILAYER CO-EX FILM BLOWING LINES

We have a large range of co ex film blowing lines starting from two layers and up to 11 layers. And the lines can be equipped with a multitude of single screw extruders sizes from our smallest 12.5 mm conical version to our largest 60 mm size. And our pancake type dies are design by our Canadian consultant Mr. John Perdikulas of Compuplast, ensuring that each film layer will meet with customers exact requirement. The lines are a large lay flat film sizes as listed below and they can be equipped with a lot features such of which a few are as following

  • Duplex air cooling ring with high efficiency
  • Oscillating Nip-Roll for very even film rolls
  • From traditional digital controls to fully computerized lines
  • Single or multi station wind ups
  • Computerized gravimetric hopper feeding system for precise control of layer thicknesses
  • Towers for Co-Ex film lines

More Less

Applications
Packaging

Target Products
Film/Sheet, Flexible/Elastic

Product category: Extrusion lines for blown film

SINGLE LAYER FILM BLOWING LINES

Single and Multi-layer film blowing lines for film lay-flat widths of up to 550 mm. with many features such as twin channel air cooling ring, variable speed haul-off and nip-rolls, etc.

The film blowing attachment is connected to our single screw extruder via a C-clamp on the flange of the extruder unit. The attachment is built up on an individual self-supporting frame with lockable casters and thus can be easily removed from the extruder.

The die is mounted on the two tower aluminum pillars, adjustable in height to align with the extruder flange.

The film blowing attachment is equipped with film bubble stabilizing cage and synchronous adjustable film collapsing frames with polished teak wood or carbon roller gate rods.

More Less

Applications
Packaging

Target Products
Film/Sheet, Flexible/Elastic

Product category: Extrusion lines for blown film

DOWNWARD BLOWN FILM LINE WITH WATER QUENCHING OF FILM BUBBLE

This line with water cooling of the film bubble will enable extremely high film clarity which is due to the rapid cooling of the melt coming out from the die. This is for example very useful for blowing PP film which will have very high transparency and gloss. Also PP is easy to blow this way contrary to conventional upward air cooled film blowing. But this method of blowing films is also suitable for other difficult to blow resin types and we can also supply this line in a multi-layer configuration. the line is equipped with a system which completely removes the water from the film. The line shown here is for a max lay flat width of 350 mm and it is equipped with 25 mm, 30 L/D extruder.

More Less

Applications
Packaging

Target Products
Film/Sheet, Flexible/Elastic

Product category: Extrusion lines for blown film

VERTICAL MACHINE DIRECTION STRETCHING UNITS (MDO)

Vertical Machine Direction Stretching units (MDO) now available in 4 sizes from roll widths 350 to 800 mm. Also available with 2 stretching gaps.

These highly efficient units can be placed in line with a film blowing or cast film unit, either in single or multi-layer versions and they can also be used free standing, fed by pre produced films in rolls. All our MDO units are designed as stand up vertical versions taking up minimum floor space. They are available with both water and oil roll heating units for a max temperature of 220 °C and they all are equipped with a very practical chain driven film threading system for easy and quick set up. Depending on film composition, the film can be stretched up to 10 times with either one or two stretching stations.

More Less

Applications
Packaging

Target Products
Film/Sheet, Flexible/Elastic

Product category: Extrusion blow moulding machines, Extrusion stretch blow moulding machines

CO-EXTRUSION BOTTLE BLOW MOULDING LINE

Fully automatic hydraulic bottle blow moulding attachment can be attached to our 20 and 25 mm single screw extruders. The lines used a streamlined die for optimum color dispersion. A minimum amount of purging is needed for color change over.

Our range of Blow Moulding lines produces single layer or multilayer bottles of up to 125 ml size and can produce bottle in practically all resin types that can be blown.

Our new larger bottle blow moulding attachment can produce bottles of up to 250 ml. The attachment is hydraulic with high clamping force. The co-ex 2 and 3 layer dies are made with adjustable parison thickness and they produce a very even layer thickness over the entire bottle.

More Less

Applications
Consumer

Target Products
Hollow Articles

Product category: Extrusion blow moulding machines, Extrusion stretch blow moulding machines

SINGLE LAYER BOTTLE BLOW MOULDING LINE

Fully automatic hydraulic bottle blow moulding attachment can be attached to our 20 and 25 mm single screw extruders. The lines used a streamlined die for optimum color dispersion. A minimum amount of purging is needed for color change over.

Our range of Blow Moulding lines produces single layer or multilayer bottles of up to 125 ml size and can produce bottle in practically all resin types that can be blown.

Our new larger bottle blow moulding attachment can produce bottles of up to 250 ml. The attachment is hydraulic with high clamping force. The co-ex 2 and 3 layer dies are made with adjustable parison thickness and they produce a very even layer thickness over the entire bottle.

More Less

Applications
Consumer

Target Products
Hollow Articles

Product category: Compounding lines, Twin screw extruders

TWIN SCREW EXTRUDER 36 MM

This NEW production version of our 36 mm Co-rotating Twin Screw Extruder is made with closed sectional barrel modules with inserted wear linings made from PM-HIP steel. In other words, the barrel is no longer of clam shell type which we deemed not feasible for this larger twin. Each barrel module has a length of 4D and the twin is available with many L/D sizes ranging from 40 to 60+. Also screw elements are made from high wear resistant PM-HIP steel and are mounted on our new high torque splined shafts. This 36 mm twin is available in two main versions, standard as well as Maxi36compounder with drives from 55 up to 90 kW, with optional fan or water cooled motors and with up to 1200 RPM

More Less

Product category: Compounding lines, Twin screw extruders

COMBI TWIN SCREW EXTRUDER 26 MM

The New 26 mm COMBI Twin with co- as well as counter rotating screws with a gear selector for easy change over.The Scientific 26 mm Combi Co and Counter-rotating Twin Screw Extruders are made with a complete modular build-up of the clam shell barrel, where each barrel section have a length of 4 D or104 mm. The standard twin has a drive power of 15 KW and a max screw PRM of 400 for counter and 800 for Co-rotating. It has a re-designed high torque gear box comprising of additional shaft supporting gears and a direct driven gear pump for closed loop forced oil lubrication and cooling.

More Less

Product category: Compounding lines, Twin screw extruders

TWIN SCREW EXTRUDER 26 MM

Modular Co-rotating Twin Screw Extruders are available with clamshell barrel inserts. With screw diameters of 12, 16, 20 and 26 mm for small batch productions.Single elements mounted on hexagonal shafts of screws for optimum flexibility of screw configurations.Available on both Single and Twin Screw Extruder are optional hopper feeders, vacuum pump with multiple vent outlets on the barrel, twin-screw side feeder, liquid feeders, quick screen changer and a multitude of screw element types and combinations.High Output 26 mm. Maxi Compounder with 22 kW drive motor and 1200 max screw RPM.

More Less

Product category: Compounding lines, Twin screw extruders

TWIN SCREW EXTRUDER 16 MM

Available with gravimetric feeders which are modified to meet the requirement of feed rates adapted to the output of these small Twin Screw Extruders.Our 16mm Twin Screw Extruder is available with forced air cooling for all barrel zones as well as side feeders (FAC version).Available in manual or fully computerized touch screen controllers with possibility to download and process all data on a PC.

More Less

Product category: Compounding lines

TWIN SCREW EXTRUDER 12 MM

Available with gravimetric feeders which are modified to meet the requirement of feed rates adapted to the output of these small Twin Screw Extruders.Available in manual or fully computerized touch screen controllers with possibility to download and process all data on a PC.

More Less

Product category: Two roll mills

FULLY COMPUTERIZED MILLS WITH AUTOMATIC MIXING OF THE BATCH

From manual versions to fully automatic hands-free computerized mills used for color matching, quality control and research.

More Less

Product category: Two roll mills

MILLS WITH ELECTRIC OR OIL HEATED OR WATER COOLED ROLLS

Polymer mills available with roll diameters of 100, 110, 150 and 200 mm. Roll heating is available in 3 ways, with our Standard 3-Zone or TRUE 3-Zone electric roll heating system, with Oil heating and cooling system, or with Electric roll heating and water cooling system.

More Less

Product category: Two roll mills

FULLY COMPUTERIZED RUBBER MILLS WITH WATER COOLED OR OIL HEATED & COOLED ROLLS

Rubber mills with water cooled or oil heated and cooled rolls. With variable speed heavy-duty direct drives to the rolls.

More Less

Product category: Two roll mills

MILLS WITH ELECTRIC OR OIL HEATED OR WATER COOLED ROLLS

Polymer mills available with roll diameters of 100, 110, 150 and 200 mm. Roll heating is available in 3 ways, with our Standard 3-Zone or TRUE 3-Zone electric roll heating system, with Oil heating and cooling system, or with Electric roll heating and water cooling system.

More Less

Product category: Two roll mills

FULLY COMPUTERIZED RUBBER MILLS WITH WATER COOLED OR OIL HEATED & COOLED ROLLS

Rubber mills with water cooled or oil heated and cooled rolls. With variable speed heavy-duty direct drives to the rolls.

More Less

Product category: Two roll mills

RUBBER MILLS WITH WATER COOLED OR OIL HEATED & COOLED ROLLS

Rubber mills with water cooled or oil heated and cooled rolls. With variable speed heavy-duty direct drives to the rolls.

More Less

Product category: Two roll mills

BENCH TOP MILL

The Micro Scientific Bench Top Two Roll Mills type LRM-M-100 is intended mainly for learning institutes and for laboratories where a smaller batch size is preferred.

More Less

Product category: Single screw extruders

SINGLE SCREW EXTRUDER UP TO 45 MM

Single Screw laboratory extruders with diameters from 12.5 to 45 mm, all with an L/D ratio of 30. The 25, 30, 40 and 45 mm extruders are available both as vented or non-vented versions and with plain screws or equipped with Maddock mixing elements as well as a mixing section on the screw tip.The amazing 12.5 mm. conical extruder. The 12.5 and 20 mm extruder are available as a Table Top version.Extruder is equipped with our weighing hopper feeders which has a large touch screen controller mounted on the central control cabinet. This system enables a very easy and precise control of the layer thicknesses where you can key in the desired layer thickness in % of total film thickness or in weight units of total weight.

More Less

About us

Company details

Our Company was founded in Thailand in the year of 1983 and it is today the largest producer in the world of its kind, covering laboratory and pilot plant polymer processing machines. Our machines are produced under Swedish management and technology combined with a very skilled and dedicated Thai staff of engineers and technicians. In 2010 we moved into our ultra-modern manufacturing facility with state of the art equipment.

More Less