REP International, SAS
France
This company is main exhibitor of
Location
Hall map
Fairground map
Our range of products
Product categories
- 03 Machinery and equipment for the plastics and rubber industries
- 03.02 Machinery and plant for processing
- 03.02.002 Injection moulding machines
- 03.02.002.01 Injection moulding machines, general purpose
- 03.02.002.01.01 Injection moulding machines up to 250 kN clamping force
Injection moulding machines up to 250 kN clamping force
- 03 Machinery and equipment for the plastics and rubber industries
- 03.02 Machinery and plant for processing
- 03.02.002 Injection moulding machines
- 03.02.002.01 Injection moulding machines, general purpose
- 03.02.002.01.02 Injection moulding machines above 250 kN to 1000 kN clamping force
Injection moulding machines above 250 kN to 1000 kN clamping force
- 03 Machinery and equipment for the plastics and rubber industries
- 03.02 Machinery and plant for processing
- 03.02.002 Injection moulding machines
- 03.02.002.01 Injection moulding machines, general purpose
- 03.02.002.01.03 Injection moulding machines above 1000 kN to 4000 kN clamping force
Injection moulding machines above 1000 kN to 4000 kN clamping force
- 03 Machinery and equipment for the plastics and rubber industries
- 03.02 Machinery and plant for processing
- 03.02.002 Injection moulding machines
- 03.02.002.01 Injection moulding machines, general purpose
- 03.02.002.01.04 Injection moulding machines above 4000 kN to 10000 kN clamping force
Injection moulding machines above 4000 kN to 10000 kN clamping force
- 03 Machinery and equipment for the plastics and rubber industries
- 03.02 Machinery and plant for processing
- 03.02.002 Injection moulding machines
- 03.02.002.01 Injection moulding machines, general purpose
- 03.02.002.01.05 Injection moulding machines above 10000 kN clamping force
Injection moulding machines above 10000 kN clamping force
- 03 Machinery and equipment for the plastics and rubber industries
- 03.02 Machinery and plant for processing
- 03.02.002 Injection moulding machines
- 03.02.002.02 Injection moulding machines, multi-component
Injection moulding machines, multi-component
- 03 Machinery and equipment for the plastics and rubber industries
- 03.02 Machinery and plant for processing
- 03.02.002 Injection moulding machines
- 03.02.002.03 Injection moulding machines, multi-station
Injection moulding machines, multi-station
- 03 Machinery and equipment for the plastics and rubber industries
- 03.02 Machinery and plant for processing
- 03.02.002 Injection moulding machines
- 03.02.002.06 Injection moulding machines, for rubber
Injection moulding machines, for rubber
- V19 C-Frame
- V29
- V39
- Performance Range: V410 Extended - 1,600kN
- Performance Range: V510 Extended - 3,050kN
- Performance Range: V710 Extended - 5,100kN
- Performance Range: V810 Extended - 8,200kN
- Performance Range: V910 Extended - 10,200kN
- H49
- H59
- Performance Range: H610 Extended - 4,000kN
- CMX - Compact-Multi-Station
- Lean Range
- Special Presses - Customized or Dual-Compound
- Entry Range: RT
- REP Pack 4.0
- HSM Devulcanization
- 03 Machinery and equipment for the plastics and rubber industries
- 03.02 Machinery and plant for processing
- 03.02.004 Presses
- 03.02.004.01 Compression moulding machines and transfer moulding machines
- 03.02.004.01.02 Compression and transfer moulding presses for rubber
Compression and transfer moulding presses for rubber
Our products
Product category: Injection moulding machines above 250 kN to 1000 kN clamping force, Injection moulding machines, for rubber
V19 C-Frame
Machine features:
- Clamping force: 400 kN.
- Size of the platens: 435 x 400 mm.
- Injection volume: 125 cm³.
Its "C-Frame” design gives access from three sides, what is essential for all profile and extruded hose welding applications.
Closing from the top allows for the lower mold to be fixed so as to prevent the profiles from moving.
Target Products
Complex Geometry
Product category: Injection moulding machines above 1000 kN to 4000 kN clamping force, Injection moulding machines, for rubber
Performance Range: V410 Extended - 1,600kN
- Clamping force: 1,600 kN.
- Size of the platens: 430 x 510 mm.
- Injection volume: 1,000 cm³.
The G10 Extended range, performance for complex processes.
Designed to better meet the various customer requirements with its embedded intelligent solutions.
Target Products
Complex Geometry
Product category: Injection moulding machines above 1000 kN to 4000 kN clamping force, Injection moulding machines, for rubber
Performance Range: V510 Extended - 3,050kN
- Clamping force: 3,050 kN.
- Size of the platens: 500 x 630 mm (630 x 630 mm optional).
- Injection volume: 1,000 or 2,000 cm³.
The G10 Extended range, performance for complex processes.
Designed to better meet the various customer requirements with its embedded intelligent solutions.
Target Products
Complex Geometry
Product category: Injection moulding machines above 4000 kN to 10000 kN clamping force, Injection moulding machines, for rubber
Performance Range: V710 Extended - 5,100kN
- Clamping force: 5,100 kN.
- Size of the platens: 630 x 800 mm (800 x 800 mm optional).
- Injection volume: 2,000; 5 000; 8,500 or 11,000 cm³.
The G10 Extended range, performance for complex processes.
Designed to better meet the various customer requirements with its embedded intelligent solutions.
Target Products
Complex Geometry
Product category: Injection moulding machines above 4000 kN to 10000 kN clamping force, Injection moulding machines, for rubber
Performance Range: V810 Extended - 8,200kN
- Clamping force: 8,200 kN.
- Size of the platens: 1,000 x 1,000 mm.
- Injection volume: 2,000; 5,000; 8,500 or 11,000 cm³.
The G10 Extended range, performance for complex processes.
Designed to better meet the various customer requirements with its embedded intelligent solutions.
Target Products
Complex Geometry
Product category: Injection moulding machines above 10000 kN clamping force, Injection moulding machines, for rubber
Performance Range: V910 Extended - 10,200kN
- Clamping force: 10,200 kN.
- Size of the platens: 1,200 x 1,200 mm.
- Injection volume: 5,000; 8,500 or 11,000 cm³.
The G10 Extended range, performance for complex processes.
Designed to better meet the various customer requirements with its embedded intelligent solutions.
Target Products
Complex Geometry
Product category: Injection moulding machines above 1000 kN to 4000 kN clamping force, Injection moulding machines, for rubber
H49
- Clamping force: 1,950 kN.
- Size of the platens: 450 x 450 mm.
- Injection volume: 1,000 cm³.
The H49 is designed for:
- Automated production.
- Injection molding (more or less simple parts).
- Low floor space and height requirement.
- An optimized cycle time.
- etc.
Target Products
Complex Geometry
Product category: Injection moulding machines above 1000 kN to 4000 kN clamping force, Injection moulding machines, for rubber
H59
- Clamping force: 3,100 kN.
- Size of the platens: 550 x 550 mm.
- Injection volume: 1,000 cm³ or 2,000 cm³.
The H59 is designed for:
- Automated production.
- Injection molding (more or less simple parts).
- Low floor space and height requirement.
- Optimized cycle time.
- etc.
Target Products
Complex Geometry
Product category: Injection moulding machines above 1000 kN to 4000 kN clamping force, Injection moulding machines, for rubber
Performance Range: H610 Extended - 4,000kN
- Clamping force: 4,000 kN.
- Size of the platens: 750 x 800 x 80 mm.
- Injection volume: 2,000 cm³ or 5,000 cm³.
The H610 is designed for:
- Automated production.
- Injection molding (more or less simple parts).
- Low floor space and height requirement.
- Optimized cycle time.
- etc.
High technology range: G10 Extended, performance for complex processes.
Target Products
Complex Geometry
Product category: Injection moulding machines above 1000 kN to 4000 kN clamping force, Injection moulding machines, multi-component, Injection moulding machines, multi-station, Injection moulding machines, for rubber
CMX - Compact-Multi-Station
The CMX machine is available with two clamping forces: 1,540 kN or 2,544 kN.
This machine type is also available for dual-compound applications.
Target Products
Complex Geometry
Product category: Injection moulding machines above 1000 kN to 4000 kN clamping force, Injection moulding machines, for rubber, Injection moulding machines above 4000 kN to 10000 kN clamping force
Lean Range
The G10 Core is a machine line, which has been matched for less demanding processes.
The G10 Core presses are cost-optimized presses of generation G10 with all major functionalities and the expertise of REP.
Target Products
Complex Geometry
Product category: Injection moulding machines above 1000 kN to 4000 kN clamping force
V410 LSR - 1,600kN
- Clamping force: 1,600 kN.
- Size of the platens: 430 x 510 mm.
- Injection volume: 1,000 cm³.
Machine which is particularly appropriate for the production of flat gaskets as used in fuel cell applications.
LSR part injection molding.
Flashless injection molding.
Applications
Electronics,
Miscellaneous
Target Products
Film/Sheet,
Complex Geometry
Product category: Injection moulding machines, multi-component, Injection moulding machines, for rubber, Injection moulding machines, multi-station
Special Presses - Customized or Dual-Compound
Leading-edge expertise supported by the guarantees of the REP GROUP!
A team of engineers at your disposal for the development and design of presses intended for special applications.
Target Products
Complex Geometry
Product category: Injection moulding machines up to 250 kN clamping force
Microject
Usability and flexibility. Plug and Produce!
Target Products
Complex Geometry
Product category: Injection moulding machines above 1000 kN to 4000 kN clamping force, Injection moulding machines above 4000 kN to 10000 kN clamping force, Injection moulding machines, for rubber
Entry Range: RT
A REP injection unit combined with a closing unit of a Tung Yu press.
This combined technology offers open-ended options:
- Separate extrusion and injection thanks to the "Y" type injection unit.
- 2- or 3-stroke closing unit.
- Proportional closed-loop temperature control.
- Optimized floor space and ergonomics thanks to its modular design.
Target Products
Complex Geometry
Product category: Injection moulding machines, for rubber
REP Pack 4.0
Thanks to REP Pack 4.0, REP introduces the new technologies amid the industrial processes of their customers.
REP Pack 4.0 includes 11 modules: REP Net 4.0 / REP CostAdvisor / REP ProdDoc / REP Predict / REP HandShake / REP Tag / REP Viewer 4G / REP PressDoc / REP Sequence / REP Net App / REP WattMeter. They allow for the real time supervision of the workshop, centralized settings and the analysis and calculation of the process profitability.
Target Products
Complex Geometry
Product category: Injection moulding machines, for rubber
HSM Devulcanization
The purpose of HSM technology consists in devulcanizing rubber waste for reintroduction into the production chain.
This process is used to recycle production waste and to obtain a true substitute for the basic compound.
Product category: Compression and transfer moulding presses for rubber
Tungyu's Rotocure
The Rotocure is a continuous curing conveyor, suitable for the production of rubber sheets of specific dimensions and shapes.
Target Products
Film/Sheet,
Semisolid,
Flexible/Elastic
Product category: Compression and transfer moulding presses for rubber
Tungyu's TYC-series
There are two series of them: 2RT or 3RT depending on the mold (2-layer or 3- layer mold)
Equipped with a 4-column style mechanism with high precision of parallelism, their adjustable opening stroke permits different mold heights. Their vacuum cover design allows for cure time reduction and increases production efficiency.
Target Products
Complex Geometry
Product category: Compression and transfer moulding presses for rubber
Tungyu's Rubber Oil Seal Presses (THP Series)
There are two series of them: 2RT or 3RT depending on the mold (2-layer or 3- layer mold)
Simplicity in mechanism for easy maintenance, single station unit or two-station unit, vacuum cover design allowing for cure time reduction. Their vacuum cover design allows for cure time reduction and increases production efficiency.
Target Products
Complex Geometry
About us
Company details
With more than 60 years experience in the design and construction of rubber injection machines, the company has an extremely broad understanding of rubber molding and also provides solutions for the thermoplastic and polymer industries.
REP presses are mainly used in the automotive industry for anti-vibration systems and sealing applications. But they are also used in other fields like the pharmaceutical industry, household equipment sector or agriculture.
Thanks to various partnerships, REP international also offers compression presses, thermoset and composite molding presses, machines for mold cleaning and rubber devulcanizing machines.
Company data
Number of employees101 - 500
Foundation1907
Area of business- Machinery and equipment for the plastics and rubber industries
- Services for the plastics and rubber industries
Rubber manufacturing / processing