Manage stand orders
Select Option
BFM S.r.l.
Via 4 Novembre, 159,
21058
Solbiate Olona (VA)
Italy
Italy
Location
Hall map
Fairground map
Our range of products
Product categories
- 03 Machinery and equipment for the plastics and rubber industries
- 03.03 Post processing machines and downstream equipment
- 03.03.005 Winding equipment
Winding equipment
- 03 Machinery and equipment for the plastics and rubber industries
- 03.04 Machinery and plant for finishing, decorating, printing and marking
- 03.04.001 Printing equipment for plastic and rubber products
Printing equipment for plastic and rubber products
Our products
Product category: Printing equipment for plastic and rubber products
BM 180/T/EL mod.800 (Sac a poche)
Sac a Poche width ( roller width) from 170 to 280 mm
Sac a Poche length (material feeding)from 400 to 650 mm
Sac a Poche thicknessfrom 70 to 100 Microns
Production Output50 Strokes/min ( equal to 100 bags/min)
Mother reel diametermax 800 mm
Line total length8m approx.
Line total width 2,5 m. approx.
Installed power 24 KW
Required compressed air 500 lit/min – 7/8 ba
Sac a Poche length (material feeding)from 400 to 650 mm
Sac a Poche thicknessfrom 70 to 100 Microns
Production Output50 Strokes/min ( equal to 100 bags/min)
Mother reel diametermax 800 mm
Line total length8m approx.
Line total width 2,5 m. approx.
Installed power 24 KW
Required compressed air 500 lit/min – 7/8 ba
Product category: Printing equipment for plastic and rubber products
Mercury 10 colors gearless
10 colors with motorized printing groups and "sleeves change" in machine
The "Mercury" is a rotative Flexo Printer of high precision with the characteristic of the central drum, that guarantees a good quality of printing even on very thin and elastic materials.
Primarily used for works 10+0, it allows to perform printing of quadricromie of high resolution with centesimal precisions of register.
It is mainly used for the printing of plastic materials: LDPE, HDPE, BOPP, PP, PVC.
The strong structure allows to use it also for the printing of paper, with a speed of production up to 300/350 mt/min.
All Models are composed with horizontal printing groups and Doctor Blade chambers completely motorized, that allow to perform all the regulations of the movements, also staying in front of the videocamera of printing control.
The translation of the anilox and portaclichè cylinders has been realized with stepping motors, steel prismatic guides and ballscrew.
Also the longitudinal-transversal registers have been motorized with stepping motors.
All the movements are checked through by the operator with the device "UFO" with a precision of 0,01 mms.
Each printing group is driven independently, and it is provided with electronic sequential split rolls at the stop of printing process and electric ink grinding unit.
They are provided with electric ink pumps circulation complete with stainless steel tanks.
The employed technical solutions of construction, and the "CANTILEVER SYSTEM" for the change of "SLEEVES" both anilox and portaclichè, have allowed to reduce drastically the changes of work.
The "Mercury " Printer is completed as follow:
The "Mercury" is a rotative Flexo Printer of high precision with the characteristic of the central drum, that guarantees a good quality of printing even on very thin and elastic materials.
Primarily used for works 10+0, it allows to perform printing of quadricromie of high resolution with centesimal precisions of register.
It is mainly used for the printing of plastic materials: LDPE, HDPE, BOPP, PP, PVC.
The strong structure allows to use it also for the printing of paper, with a speed of production up to 300/350 mt/min.
All Models are composed with horizontal printing groups and Doctor Blade chambers completely motorized, that allow to perform all the regulations of the movements, also staying in front of the videocamera of printing control.
The translation of the anilox and portaclichè cylinders has been realized with stepping motors, steel prismatic guides and ballscrew.
Also the longitudinal-transversal registers have been motorized with stepping motors.
All the movements are checked through by the operator with the device "UFO" with a precision of 0,01 mms.
Each printing group is driven independently, and it is provided with electronic sequential split rolls at the stop of printing process and electric ink grinding unit.
They are provided with electric ink pumps circulation complete with stainless steel tanks.
The employed technical solutions of construction, and the "CANTILEVER SYSTEM" for the change of "SLEEVES" both anilox and portaclichè, have allowed to reduce drastically the changes of work.
The "Mercury " Printer is completed as follow:
- Automatic edge guide before printing stations
- Automatic edge guide before re-winding stations
- Heating system by electric batteries
- Electric or pneumatic pumps for ink
- Videocamera for printing process control
- Chiller for temperature control of central drum
- Inversion diagonal system (triangle) for 10+10 on 50% of material
- Inversion diagonal system (triangle) external of the machine - for 5+5 on 100% of material
- Washing system for ceramic anilox & Doctor blade system ( automatic and/or semi-automatic)
- Heating system by Gas, Gpl , Diathermic oil
- Electronic Viscosimeters for solvent
Applications
Consumer
Target Products
Film/Sheet,
Printed/Decorated,
Flexible/Elastic
About us
Company portrait
bfm structure is placed in Solbiate Olona (Va), in the North of Italy, just 20 km far from Milan and near the Malpensa International Airport.
The experience reached in these years and the positive reply obtained in over 80 countries, are parameters of guarantee and reliability.
TECHNICAL OFFICE:
is composed by a Team of People, all qualified for the use of CAD systems, for a management of the machines in planning and development "Full Tech".
The sinergia in action among Technical Office and Commercial Office and the "Know-how" matured in the planning and construction of the machines, allows bfm to give always an answer to the Customers requests.
COMMERCIAL OFFICE:
primary aim and philosophy of bfm is well represented into reaching and consolidating the relationships with the Customers, putting in the foreground their satisfaction taking care of all the Commercial and Technical aspects.
bfm staff originates from the Technical area and it is prepared first of all to understand the "real requirements" of the Customers.
PRODUCTION:
A staff of people, mechanical and eletronical operators, is devoted to guarantee the best assemby of the different machines.
QUALITY:
bfm uses avantguarde components , whose quality is guaranteed from controls done during the assembly and from an accurate final testing, performed with client materials to guarantee a real production test.
POST-SALE ASSISTANCE:
is one of bfm main characteristics and it is done from qualified people , that can solve with the formula "Just in Time" the possible Customers problems.
bfm - technicians directly from Factory are able to communicate by Modem with the machines installed at Customer's place.
The experience reached in these years and the positive reply obtained in over 80 countries, are parameters of guarantee and reliability.
TECHNICAL OFFICE:
is composed by a Team of People, all qualified for the use of CAD systems, for a management of the machines in planning and development "Full Tech".
The sinergia in action among Technical Office and Commercial Office and the "Know-how" matured in the planning and construction of the machines, allows bfm to give always an answer to the Customers requests.
COMMERCIAL OFFICE:
primary aim and philosophy of bfm is well represented into reaching and consolidating the relationships with the Customers, putting in the foreground their satisfaction taking care of all the Commercial and Technical aspects.
bfm staff originates from the Technical area and it is prepared first of all to understand the "real requirements" of the Customers.
PRODUCTION:
A staff of people, mechanical and eletronical operators, is devoted to guarantee the best assemby of the different machines.
QUALITY:
bfm uses avantguarde components , whose quality is guaranteed from controls done during the assembly and from an accurate final testing, performed with client materials to guarantee a real production test.
POST-SALE ASSISTANCE:
is one of bfm main characteristics and it is done from qualified people , that can solve with the formula "Just in Time" the possible Customers problems.
bfm - technicians directly from Factory are able to communicate by Modem with the machines installed at Customer's place.