Erimaki S.N.C.

Via Timavo, 36, 20037 Paderno Dugnano (MI)
Italy
Telephone +39 02 99044723
Fax +39 02 99044729
info@erimaki.it

Hall map

K 2019 hall map (Hall 11): stand B21

Fairground map

K 2019 fairground map: Hall 11

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.01  Machines and equipment for preprocessing and recycling
  • 03.01.011  Separating and sorting systems for waste

Our products

Product category: Separating and sorting systems for waste

Trommel rotary separator

The material is loaded into a drum equipped with a mesh, slightly sloping; screening is driven by the cylinder rotation.

Oversize powder is collected at the other end of the cylinder (rejected material outlet); the screened material is collected under the cylinder (powder outlet).

The operating principle of the rotary screen is extremely simple. The product is fed into the machine from the loading mouth and, through an auger, is sent to sieving cylinder, partly consisting of a closed sheet and partly of a mesh or a drilled sheet allowing separation.

Driven by the auger, the product comes into contact with the mesh, which lets through the solid fraction (e.g. pulverised shavings), which shall be discharged from the hopper. Impurities (e.g. shavings), instead, are held back and, proceeding inside the mesh are then conveyed to the secondary discharge mouth.

The machine may be equipped with a brush self-cleaning system, to ensure that the screening surface is always in good working order and clean.

ERIMAKI manufactures and sells the rotary separator in two different models, featuring different dimensions and thus hourly rates, to meet the different customer requirements.

The machine may be made of painted carbon steel or of AISI 304/316 stainless steel.
The latter, upon request, may be supplied with a satin or sand-blasted surface finishing.

Removing the inner components of the rotary screen is extremely simple, for easier cleaning and periodic maintenance.

More Less

Product category: Separating and sorting systems for waste

Rotary separator

The rotary separator is ideal for control and refinement sieving, as it assures the particle size uniformity and the absence of impurities in the treated product.

This operation is often required before product packaging; this implies the need to meet two basic requirements:
1) optimum sieving degree;
2) high level of productivity.

The operating principle of the rotary separator is extremely simple. The product is fed into the machine from the loading mouth and, through an auger, is sent to sieving chamber, consisting of a mesh drum. Here, stirred by special rotating bars, the product comes into contact with the mesh, letting through the "fine" fraction, which shall be discharged from the main mouth. Impurities, instead, are held back and, proceeding inside the mesh are then conveyed to the secondary discharge mouth. The sieving machine is equipped with compressed air connectors in the front and rear section, to keep the powder away from bearings. 

ERIMAKI manufactures the rotary separator in three models, featuring different dimensions and thus hourly rates, to meet the different customer requirements. The machines may be made of carbon steel or stainless steel. The latter, upon request, may be supplied with a mirror-polished surface finishing.

Removing the inner components of the rotary separator is extremely simple, for easier cleaning. The following are just a few of the products which are typically sieved using the rotary separator.

More Less

Product category: Separating and sorting systems for waste

Rotary separator

The rotary separator is ideal for control and refinement sieving, as it assures the particle size uniformity and the absence of impurities in the treated product.

This operation is often required before product packaging; this implies the need to meet two basic requirements:
1) optimum sieving degree;
2) high level of productivity.

The operating principle of the rotary separator is extremely simple. The product is fed into the machine from the loading mouth and, through an auger, is sent to sieving chamber, consisting of a mesh drum. Here, stirred by special rotating bars, the product comes into contact with the mesh, letting through the "fine" fraction, which shall be discharged from the main mouth. Impurities, instead, are held back and, proceeding inside the mesh are then conveyed to the secondary discharge mouth. The sieving machine is equipped with compressed air connectors in the front and rear section, to keep the powder away from bearings. 

ERIMAKI manufactures the rotary separator in three models, featuring different dimensions and thus hourly rates, to meet the different customer requirements. The machines may be made of carbon steel or stainless steel. The latter, upon request, may be supplied with a mirror-polished surface finishing.

Removing the inner components of the rotary separator is extremely simple, for easier cleaning. The following are just a few of the products which are typically sieved using the rotary separator.

More Less

Product category: Separating and sorting systems for waste

Direct discharge screen with two side motors

The direct discharge vibrating screens with two side motors are used to carry out “in line” control sieving, thanks to the central feeding system aligned with the discharge hopper, below the screened product. 

ERIMAKI manufactures this model of vibrating screen in different diameters, ranging between Ø400 mm and Ø1500 mm.
It may be made of AISI 304/316 stainless steel or of painted carbon steel.
Upon request, it also available with mirror-polished surface finishing.

This type of screens allows to use very fine meshes, for extremely accurate filtering of the liquid fraction, or multiple overlapping meshes, to separate the solid fraction according to particle size.

More Less

About us

Company details

We manufacture and sell screens and circular vibrating screens, sieves and electrical sieving machines, rotary separators and static separators, direct discharge screens, tumbler screens. Productivity and professionalism in screening and separation: this has been our company's philosophy for over thirty years.

More Less