Enginy S.L.

C/ Castellgali, 16, 08295 Sant Vicenc de Castellet
Spain
Telephone +34 93 8330566
Fax +34 93 8330047
enginy@enginy.es

Hall map

K 2019 hall map (Hall 13): stand D25

Fairground map

K 2019 fairground map: Hall 13

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.005  Machinery for foam and reactive resins
  • 03.02.005.01  Preexpanders, foaming machinery for parts and blocks (for EPS, EPP, EPE)

Preexpanders, foaming machinery for parts and blocks (for EPS, EPP, EPE)

Our products

Product category: Preexpanders, foaming machinery for parts and blocks (for EPS, EPP, EPE)

CONTINUOUS PREEXPANDER

Preexpander:
Rugged construction for a continuous operation without maintenance.
Automatic shut down and start up system that assures no lumps.
Feed system that allows high flexibility on flows for high and low densities, using an adjustable frequency drive.
Inside view with glasses at two levels.
Doors allow access to preexpander inside for lumps removal if needed. The agitator shaft can be removed. The feed screw can be dissembled for cleaning.
PLC control can be connected to an automated silos control operation.

Fluid bed:
Oversized for current market resins.
Air pre-heater can be installed to the bed in order to dry more effectively and to decrease the residence time in silos and molding cycles.
The outlet material goes trough a screen taking the lumps to a grinder, assuring the correct molding machine operation.

More Less

Product category: Preexpanders, foaming machinery for parts and blocks (for EPS, EPP, EPE)

DISCONTINUOUS PREEXPANDER

PREEXPANDER:
Rugged construction in stainless steel in the parts in contact with the product.
Production capacity and flexibility in a wide density range with minimum energy consumption.
Vessel mixer, with variable speed, to make a good material treatment according density.
Automatic control process with PLC and touchable digital screen:
- Process is shown on the screen in real time.
- Charged material weight system regulated by the density control.
- File managing system in memory of the control parameters, depending on material type and desired density.
- Include possibility of the automatic silos managing system.
Density mesurement for its automatic regulation and data store.
Material feeding container with two speed rotating screw, for accurate weight adjustment. Automatic complete container emptying. Multiple container system for different densities, with beads aspiration under vacuum system.

FLUIDIZED BED:
Aluminium construction. Oversized for the actual resins market.
Fluidification screens of the fluidized bed in stainless steel with a perfect air distribution, easy cleaning and avoiding the tissues changing tasks.
Automatic fluid bed emptying at the end of the automatic operation.
Possible installation of the air preheated, to dry the pearls quicker and decrease the storage times in silos and production cycles times.

More Less

Product category: Preexpanders, foaming machinery for parts and blocks (for EPS, EPP, EPE)

CFF SHAPE CUTTING

The ENGINY shape cutting machine type CFF, the EPS block installed over a fixed frame, over the fixed frame moves another frame where the hot wires are installed. The shape cutting machine type CFF has a higher cutting accuracy than the shape cutting machine type CFM. Also, this machine allows the lateral scraps in only one operation.

The CAD software is easy to operate and has a very simple learning process. Absolute and incremental coordinates can be used along with the mouse to produce the desired shapes. It can be included also a graphic table.
The CAD software is easy to operate and has a very simple learning process. Absolute and incremental coordinates can be used along with the mouse to produce the desired shapes. It can be included also a graphic table.
PC, IBM compatible programs for cutting can be made in the board and modified in the machine if needed.
High accuracy of the cut shape, due to the control operation with a CNC, with positioning feedback with encoders. Precision ±0.1 mm.
The cutting speed is defined on each program step and can be modified during the machine operation.
The temperature is regulated by a potentiometer and adjusted constantly by tiristors.
The shape cutting machine is made at the specified size required by the customer.
The fans over hot wires assure a higher block cutting speed only limited by the material to be cut.
In the cutting operation, the shape cutting machine stops a fixed time at the end of each instruction. This option allows to have a smoother cutting shape in the pieces and a bigger production capacity.
We have developed a cutting shape machine included in a complete cutting line, that allows to cut any type of pieces required by the market.

Mechanical and electrical features:
Built in a rugged and solid construction, with 3 paint layers..
The movable parts over the linear motion guides are made in aluminum.
Brushless servomotors.

More Less

Product category: Preexpanders, foaming machinery for parts and blocks (for EPS, EPP, EPE)

CFM SHAPE CUTTING

The ENGINY shape cutting machine type CFM, the EPS block installed over a belt moved with a motor controlled by CNC. The hot cutting wires are installed on a support over a linear motion guides located on a fixed frame, that is moved with a motor controlled by a second CNC. The two axis movement is controlled by CNC driven motors.

The shape cutting machines type CFM have the following main features:
The CAD software is easy to operate and has a very simple learning process. Absolute and incremental coordinates can be used along with the mouse to produce the desired shapes. It can be included a graphic table.
PC, IBM compatible programs for cutting can be made in the board and modified in the machine if needed.
High accuracy of the cut shape, due to the control operation with a CNC, with positioning feedback with encoders. Precision ±0.1 mm.
The cutting speed is defined on each program step and can be modified during the machine operation.
The temperature is regulated by a potentiometer and adjusted constantly by tiristors.
The fans over hot wires assure a higher block cutting speed only limited by the material to be cut.

Mechanical and electrical features:
Built in a rugged and solid construction, with 3 paint layers.
The movable parts over the linear motion guides are made in aluminium.
Brushless servomotors.

More Less

About us

Company details

ENGINY,S.L. designs and manufactures machines and plants to process EPS/EPP and for vacuum applications.

Our firm has focused our activity to guarantee, through a long experience, a number of factors that increase our market advantage: quality, specialization, product, costs and customer's proximity. Every year, we are working hard to achieve better industrial automation, search for new technologies and investigate new materials application in order to satisfy our customer needs.

Our products line include:
Vertical block machines.
Cutting lines, oscillating/hot wires.
Preexpanders continuous y discontinuous.
Central vacuum systems.
Water refrigeration units.
EPS recycling units.
EPS dust separation units.
EPS/EPP Storaging silos.
Industrial automations.
Film wrapping machines.
Projects "key in hand" for EPS/EPP plants.

More Less