Basar Agir Makina Sanayi ve Tic. Ltd. Sti.

Birlik Sanayi Sitesi, 2 Cadde, No: 46, Beylikdüzü, 34520 Istanbul
Telephone +90 212 8760386
Fax +90 212 8752686


Hall map

K 2016 hall map (Hall 11): stand D25-01

Fairground map

K 2016 fairground map: Hall 11

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.02  Machinery and plant for processing
  • 03.02.001  Extruders and extrusion lines
  •  Extrusion lines
  •  Extrusion lines for pipes and profiles

Extrusion lines for pipes and profiles

Our products

Product category: Extrusion lines for pipes and profiles

Pipe heads

Pipe heads which are also called a kind of pipe moulds, are tied outlets of extruders.This dies gives pipe form to platicmaterial and adjusts the Wall thickness of pipes.Our company supplies wide working range heads with high capacity to our customers

· Wide working ranges at same pipe head by means of different adapters

· All wall thicknesses are together in one die set by ‘’pluggable system’’

· All pipe head materials are nitrated

· All surfaces are polished where the plastic material touches

· Materials and resistances with European standards

More Less

Product category: Extrusion lines for pipes and profiles

Adjustable calibrating sleeves

Adjustable calibrating sleeves are the parts which has much easiness and offers many advantages in calibrating systems.Adjustable calibrating sleeve’s most imortant superiority against normal calibrators is possibility to get all pressure classes of pipes from PN4 upto PN32 in one calibrator.Also adjustable sleeves gives possibility for special productions.You can get both in ISO standard pipes and also inch standard pipes from one calibrator.Furthermore it is not be needed to change vacuum degrees if the raw material changes.İn addition these sleeves provides to save high ratios of raw materials by approching ‘’0’’ in outside diameter tolerance. 

· For PE and PP pipes

· Calibrates pipes at a defined diameter

· Possible to get all pressure classes ( PN4-PN32) in one calibrator.

· Possible to save and ger rid of the raw material

· Decreases the setting-up time

· Strong against heating and corrosion

· All parts of calibrators made from Special Al-Bronze alloy and AISI 304 material

More Less