Heat Source

115, Jaywant Industrial Estate, 63, Tardeo Road, Haji Ali., 400 034 Tardeo, Mumbai
Telephone +91 22 23531025
Fax +91 22 23517431


Hall map

K 2016 hall map (Hall 12): stand D23-03

Fairground map

K 2016 fairground map: Hall 12

Our range of products

Product categories

Our products

Product category: Heating elements


Max. Watt density: 58 W/Sq. inch.
Max. surface temp. 650 Deg. C.

HALF SHEATHED : Eight convenient sizes. Consist of MgO insulated heating coil with terminal studs. Being sheathed in one side only, it has very little residual heat.

FULLY SHEATHED : Used where chances of falling liquid on it and where atmosphere contain more humidity.

· Heating of Dies, moulds, packaging machines. Soft metal melting etc.

More Less

Product category: Heating elements


Max. Watt density: 40 W/Sq. inch.
Max. temp. up to 700 Deg. C.

Ceramic Knuckles Heaters withstand very high temperature and it is much rugged in compare to micanite insulating sheet. Heater will have double jacket. Inner jacket will prevent radiated heat loss and outer jacket will keep hot surface hidden inside and will not give scorching effect if touched mistakenly. So, it is much safer for the machine operator. This Jacketed heater will save power considerable, by preventing heat loss. It heats the job more quickly & efficiently, this increases productivity and decreases loss of time.

Heat cylinders / barrels of plastic processing machinery / soft metal melting pots/ Vessels / where the heaters are installed without cover and in visible manner.

More Less

Product category: Heating elements


Max. Watt density: 95 W/Sq. inch.
Max. surface temperature up to 700 Deg. C. (1300 Deg. F).

*A very wide contact surface results in exceptionally high levels of thermal conductivity towards the body that needs to be heated.

* Wide range of possible shapes & heavy-duty construction results in very highresistance to mechanical shocks. Heaters can be incorporated in to brass or aluminum casting.

Heating of Plastic injection nozzles. Aerospace, railway, chemical, metalworking, food industry, glass & paper industry, automotive, packing & medical industry.

More Less

Product category: Heating elements


Max. Watt density: 30 W/Sq. inch.

Max. surface temp. 870 Deg. C. Wave length: 2.55 microns.

Medium wavelength radiation. * The most preferred source of heat when rapid heater response is needed. * Comprises of series of quartz tube sheathed heating element within highly reflective steel housing. Available in overall sizes of modules (in mm) 248 x 62, 125 x 62, 62 x 62, 248 x 117, 125 x 125.
(150 to 1250 Watts).

·Various industrial heating application, drying, curing, softening etc.

More Less

Product category: Heating elements


Max. Watt density: 10 W to 160 W/Sq. inch,
Max. surface temp. 800 Deg. C.

Can be fabricated as per requirement, in different diameters, lengths & supply Voltages (from 12 to 460 Volts), with or without thermocouple. Having variety of terminal types (leads, screw type or pin type). Heater sheath materials depends upon temperature requirement (may be of incoloy, inconel, stainless steel or brass). It is advisable to use high Watt density heater through Thyristor Controller.

· Heating of dies, moulds, packaging machines.

More Less

Product category: Heating elements


Max. Watt density: 35 W/Sq. inch.

Consist of refractory insulated heating element, covered with zinc plated MS or SS sheet with fixing holes. Finned heaters for more coverage of surface area.

·Air Heating purpose. Finned heaters are used where high velocity of air to be heated.

More Less

About us

Company details

Heat Source is a Partnership company & known as a prominent manufacturer of Electrical heaters, Thermocouple and Equipments. The company is supported by a sound infrastructure and an advanced quality control department, along with technical team having experience of since last five decades. Heat Source believes “Quality is never an accident, it is always a result of Intelligent effort”, Heat Source, continuously optimizes and improves its technologies to maintain its widely acknowledged reputation.

The company engages itself in constant research and endeavors to introduce latest technologies which meet and exceed the requirements of its clients. The company has earned a distinctive recognition by delivering an innovative line of products at highly economical prices.

Heat Source is authorized distributor & of Rotfil (Italy) & Mor Electric USA. It maintains the international quality standards in all its industrial heating elements and allied products and as such these are acclaimed all over Asia earning the company a massive market base at the international level.

With the support of a well developed infrastructural setup and experienced professionals, Heat Source is able to fabricate a wide range of Industrial heaters, Thermocouples and Equipments as per the needs and requirements of the valued customers.

More Less