FUX Maschinenbau- und Kunststofftechnik GmbH

Rossleithen 72, 4575 Rossleithen
Telephone +43 7562 6111-0
Fax +43 7562 6111-57


Hall map

K 2016 hall map (Hall 12): stand E49-1

Fairground map

K 2016 fairground map: Hall 12

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.04  Machinery and plant for finishing, decorating, printing and marking
  • 03.04.004  Laminating plant

Our products

Product category: Laminating plant

Profile Bending Machine 17-PB-00

This model variation is designed for serial arches and single arches. Because of the solid construction the machine is almost maintenance-free. On account of the hand wheel radius adjustment system the setup time is reduced to a minimum. Therefore with this FUX bending system a higher production capacity can be reached than with any other bending machine on the market in that price category. The side press cylinders and the press plate on top guarantee an optimum product quality. Because FUX profile bending machines work „dry“ and clean, it is possible to set up these machines in all production areas. Many arches like half round arches, round arches, arches with straight sides, gothic arches, cage arches, segment arches, positive and negative arches as well as different special forms can be produced with this machine.

More Less

Product category: Laminating plant

Seal Connecting Machine 79-SC-50 + 79-SC-55


With this automatic FUX seal connecting machine it is possible to connect EPDM seals together. The advantage of our bonding method is that the seal remains elastic and compressible in the connected corners and does not become hard as it would from the usual welding of TPE and soft-PVC seals.

The process takes approximately 30 seconds depending on the seal geometry.

With the automatic FUX seal connecting machine, seals which are cut in mitre on the FUX seal cutting machine are connected to a complete frame (up to 4 corners) in one production step.

This NEW operation has been applied for patent by FUX.



With this automatic FUX seal cutting machine EPDM seals are cut to length with accuracy to a millimetre for processing on the FUX seal connecting machine.

The desired cutting length are entered by means of a touch screen terminal, the positioning of the tools takes place by servo drives. The pneumatic cut activates depending on request in metre (45°) or straight (90°) .

Due to the method of clamping there is no over expanding or compression of the seal.

This NEW operation has been applied for patent by FUX.

More Less

Product category: Laminating plant

Doble Side Profile Laminating Machine 83-DLM-300D

This model variation was developed for professionals and is also suitable for companies starting lamination production because of its user friendliness.

With this machine profiles made of plastic, PVC, wood, metal and aluminium can be coated on both sides simultaneously with foil and lamination films as roll product.

The highly loadable mechanical version guarantees a long life. The machine is equipped to a professional level and the high quality standard of the end product is ensured by many

machine features.

The continual check of the profile, foil and adhesive temperatures always enable control of quality and consistency of the lamination process.

The synchronization control of adhesive supply, roll and primer pump to the production speed guarantees minimum primer and adhesive use and the highest product quality.

The FUX exchangeable cartridge system of the whole pressing zone enables shortest changeover times.

More Less

Product category: Laminating plant

Seal Inserting Maschine 77-SI-00

This FUX seal inserting machine was developed for inserting EPDM, TPE and soft PVC seals into profile. The seals can be inserted in PVC, aluminium and wood profiles.

Depending on customer requests more seals can be inserted into the profile at the same time. According to customer requirements the machine can process 1 to 7 meter profiles and cut off seals at 90 ° or 45°. The seal inserting machine can also be placed in a production line.

More Less

About us

Company details

FUX's young and dynamic team has focused on the development and
manufacture of new, innovative products for the window industry.

Economy, quality and protection of the environment are the
mainstays of the FUX technology which has reaped success worldwide.

Our company's slogan is:

Perfect technology for your success
FUX guarantees Know-How in window construction

More Less