Via alla Spiaggia N.7/A, 23900 Lecco
Telephone +39 0341 7002-33
Fax +39 0341 7002-35


Hall map

K 2016 hall map (Hall 1): stand D23

Fairground map

K 2016 fairground map: Hall 1

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.06  Moulds and dies
  • 03.06.001  Injection and compression moulds

Our products

Product category: Injection and compression moulds

Single face moulds


Thin Wall Packaging
Industrial Packaging
Consumer Goods
Caps & Closures
Technical/Ultra Precision

The simplest form of a mold is a single face mold. A mold level, or face, is defined as the parting
line dividing the core and cavity sides of a tool. The more cavities per face increase the number of
parts per cycle, thus increasing the productivity of a mold/machine system. The number of cavities
on each face is driven by either machine tonnage or tie bar spacing availability. Mold ejection
functions are usually tied to the machine’s knockout functions, and/or combined with machine
logic functions (if two or more ejection stages, or simply air eject).


Convertibility optional design to two or more levels
Applicable to any product type market application
Our approach allows for pre-engineered convertible molds with 1, 2 or 3 opening faces
converted to a greater number of opening faces, should
future part volume increase.

More Less

Product category: Injection and compression moulds

Stack Moulds


Thin wall packaging
Industrial packaging
Consumer Goods
Caps & Closures

Copyright © CANTONI SRL 2016

Mold is “stacked” next to the other level and has the same dimensions and surface area so it fits
within the same tie bar spacing. This allows the molder to double productivity per cycle by doubling
the number of cavities on the same given machine/tonnage.

Stack molds can meet a variety of molding demands because they are available in configurations
that best help the user achieve an optimum tooling solution.


Increase output efficiency per machine
Decreases number of machines required to produce a given production requirment
Can lower a machine’s tonnage or size requirement, vs. multi cavity single face molds.
Allows molders to optimize floor space, by reducing number of machines
Mold ejection functions are self-contained, in many cases driven mechanically by the mold’s opening stroke.

More Less

Product category: Injection and compression moulds

PET Preforms Moulds

PET Preforms Moulds

Our moulds design guarantees fast and
easy servicing and maintenance.

Manufactured to very high standards
with corrosion-resistant steel plates
and optimized for preform production,
CANTONI ® moulds have a long
service life before refurbishing
becomes necessary.

CANTONI ® moulds are very
operator-friendly. Regular maintenance
work can be carried out directly at the
machine with minimum time inputs.

The core and cavity inserts parts are easy to
exchange and enable production of different
preforms from the same mould

More Less

About us

Company details

CANTONI ® is capable to manufacture a wide range of injection moulds, and
complete systems, matching clients needs and product designs to the most effective
and efficient production tooling solution in the field.

   - A wide spectrum of tooling professionals

   - Expertised mould and part designers

   - Most advanced machine tools

   - 4 test machines

LATHING The CNC turning department is composed by 3 axes machines, which allow to make perforations and millings. This quickens and increases the precision in
harder works.
MILLING The milling department is equipped with 3 and 5 axes CNC machines, linked
to an internal net with the planning department, which offers quickness and precision
in the work execution.
EROSION The CNC erosion department is completely automated and linked to the
production net. All programs are executed and checked with a program created by the
CANTONI, which has quickened the executions and guarantees a perfect precision.
QUALITY CONTROL Dimensional and functional controls are executed at every
operation in the production departments, but the item conformity is given to the
assembly department after a careful control.
TEST The test phase is monitored with care in order to verify the mould functionality
and performance. A form is filled at every test, where the final client will find the
indications and parameters to optimize the moulding cycle. Samplings and pre-series can be given upon client's request.

More Less