Eurochiller S.r.l.

Via Milano, 69, 27030 Castello d'Agogna (PV)
Telephone +39 0384 298985
Fax +39 0384 298984


Hall map

K 2016 hall map (Hall 10): stand A80

Fairground map

K 2016 fairground map: Hall 10



Lager/Material, Logistik, Transport

Via Milano, 69

+39 030 6185400

+39 030 6347003


Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.08  Ancillary equipment
  • 03.08.002  Heating and cooling technology
  •  Heating and cooling units
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.08  Ancillary equipment
  • 03.08.002  Heating and cooling technology
  •  Water chillers

Our products

Product category: Heating and cooling units

ICETEMP: Precision water cooled chillers to be placed on machine side

ICETEMP is a water cooled chiller for inside installation suitable for the precise temperature control of injection moulds.
The main features of the ICETEMP are as follows:
• accurate temperature control (+/-0,1°C) at the mould
• facility to provide high water flow rates with increased pressure to reduce Delta T on the mould

To provide the optimum performance when producing packaging or any thin-wall mouldings. In fact by keeping the temperature stable and constant, results in the following:
• repeatibility of production
• control of production costs
• increased production output
• consistent quality

The use of the ICETEMP beside the machine is convenient due to:
• the position of the units results in reduced pipe lengths which need to be insulated
• the units being supplied with internal tank, so no external storage tank is required

More Less

Product category: Heating and cooling units

ABF AGRI LINE: Precision chillers for the agricultural film cooling

Our solution: INVERTER DRIVE
The top energy efficiency provided by the ABF AGRI-LINE Series comes from the installation of 2 Inverters, one for each motor. As a result performances are boosted with the additional plus coming from the use of the compressors on 24 hours cycles, with daily but also seasonal temperatures
quite different one from the other.

Heat exchanger fitted with hydrophilic fins.
Air blowers with highly efficient distributors and ducts.
Easy remove: easy removal of air filters with double surface.

More Less

Product category: Heating and cooling units

3FLOWS HIPER: Water TCU up to 160°C with touch screen panel

Heating capacity from 6 to 24 kW for continuous operation up to 160°C
Peripheral magnetic drive pump
Heating by an highly efficient heater made of stainless steel with aluminium diffusers and over-temperature control
Cooling by plate heat exchanger made of stainless steel
Touch screen panel displaying temperatures, flow rates and alarms
Structure with removable side-panels made of pre-painted steel
IP54 rated electrical control panel

More Less

Product category: Heating and cooling units

EC ON-AIR: Remote control system

ON-AIR is a remote control system designed and built to handle in the best way EUROCHILLER's products.

Local supervision: on site monitoring by the end-user
Remote monitoring: On-line control of the unit and of its parameters
Remote assistance: Interaction with the end-user in case of malfunctions
Prompt intervention: The service is notified in real time when intervention is required and may react promptly
Quarterly reports: Detailed reports of operating conditions

More Less

Product category: Water chillers

ADXevo - ADXevo-FC: Adiabatic air cooled chillers, also with integrated free-cooler

ADXevo chillers combine the construction and functional features of the standard models, with the energy efficiency achieved with the pre-cooling of the air entering the condensers utilising adiabatic pads, which allows during high ambient conditions when the electrical consumption of the compressors reaches its peak, the required cooling duty while consuming a moderate amount of energy, which is only normally achieved during average climate conditions. Also available in FREE-COOLING VERSION.

More Less

About us

Company details

Established in 1990, EUROCHILLER designs, manufactures and assists industrial cooling systems with capacity included between 3 and 1100 kW as well as water and oil temperature control units with heating capacity ranging between 3 and 144 kW.

Our leading position in several areas of the market has been achieved through a series of successful industrial patents. "Be ready to accept new challenges" is our motto.

All this is possible thanks to our focus on quality. Each single unit is designed and manufactured in Italy and must pass through stringent quality tests before shipping.

We also maintain a tight control on the quality of parts supplied, drawing upon a network of exclusive partnerships with important Italian and European OEMs.

Since 2011 EUROCHILLER founded EUROCHILLER GROUP, a group of companies (three of production and two of services) able to offer the market a varied and complete range of opportunities, in the forefront from both the quality and the performance points of view.

More Less

Company data

Sales volume

5 - 20 Mill. US $

Export content

max. 75%

Number of employees

31 - 100



Area of business

Machinery and equipment for the plastics and rubber industries

Target groups
  • Plastic product manufacturing
  • Chemical industry
  • Rubber manufacturing / processing
  • Machinery construction
  • Packaging / distribution

Company information as a PDF file