S.N. Suteau-Anver

P.O. Box 40036, 49450 St.-Macaire-en-Mauges
106, rue Choletaise, 49450 St.-Macaire-en-Mauges
Telephone +33 2 41491199
Fax +33 2 41552969


Hall map

K 2016 hall map (Hall 3): stand A20

Fairground map

K 2016 fairground map: Hall 3

Our range of products

Product categories

  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.03  Post processing machines and downstream equipment
  • 03.03.004  Cutting machines
  • 03  Machinery and equipment for the plastics and rubber industries
  • 03.03  Post processing machines and downstream equipment
  • 03.03.008  Punching and perforating machines

Punching and perforating machines

Our products

Product category: Cutting machines

Mechanical die cutting press – Model 110/120/135/150

SUTEAU-ANVER designs and manufactures an entire range of automatic cutting presses with slider ; ranging from a single machine to the complete line your rolls or sheets of soft material can be fully or half cut, cut into strips, trimmed and your soft materials unwound and re-wound.

Depending on your rate of feed, this type of machine allows you to achieve up to 180 cuts a minute, given that, for example, one cut may represent twenty or so imprints (depending on the dimensions of the dies and the machine’s cutting power).

Technical features :

Power from 10 to 50 tons
Stroke of the upper plate 61 mm fixed
Working area from 250 X 350 mm to 600 x 600 mm
Maxi rate 180 strokes/mn for a step of less than 50 mm and 130 strokes/mn for step from 50 to 400 mm
Min. rate 60 strokes/mn
Mechanical accuracy of advance +/- 0,1 mm
Manual adjustment of the cut accurate to 0,01 mm
Double roller feed up line and down line of the cutting area with pneumatic opening
Electrical power from 7 to 20 Kw

More Less

Product category: Cutting machines

Cutting press with receding beam and rising table Model XPM

This cutting press designed and manufactured by SUTEAU-ANVER is solidly-built, accurate and silent, and specially designed for cutting any non-metallic materials, depends on its built-in hydraulics.

Our patented oil injection system operates through a main cylinder with check valves into the 2 or 4 table cylinders. There is an EC certified cell barrier to ensure the machine’s safety system at the front, and guards at the back.

It is used for cutting soft materials with one or more thicknesses into rolls or sheets up to a width of 3000 mm. Fields of application : synthetics, textiles, leather, gaskets, foam materials, plastics, carpet, felt, rubber, etc. The material can either be fed in from the front or from the back by, for example, using a double roller material feed. The work area is completely protected with accessibility at the front for greater proximity to the material.

Technical features :

Useful cutting power : from 80 T to 300 Tons
Speed of the beam, forward and back : 52 m/mn
Accuracy of beam stop : +/-5 mm
Stroke adjustable : 20 to 120 mm (220 mm in option)
Speed of cut : 22 mm/s not adjustable
Dayligth between table and beam (without die and without block) : 40 to 160 mm (250 mm in option)
Height of the work surface : 940 mm

More Less

Product category: Cutting machines

Cutting press with movable beam – Model VFS

This cutting press with movable beam is the top of SUTEAU-ANVER’s range of presses, setting the benchmark in the industry internationally.

Designed and manufactured by SUTEAU-ANVER, this press is sturdy, accurate, silent and specially developed for cutting all non-metalic materials ; its integrated hydraulic system makes it both highly efficient and productive.

Designed for mass production, your materials can be cut into rolls or sheets on a belt, or steel or polypropylene plate.

Technical features :

Electric energy : 400 Volts threephase + Neutral + Earth 50hz
Power : 11 KW to 30 KW according to the versions
Pneumatic energy : Dry air 6 Bars
Cutting table width : Further your needs
Cutting table depth : Further your needs
Cutting power : 100 tons to 500 tons
Maxi beam stroke : 180 mm (other stroke on request)
Maxi beam opening : 200 mm (other opening on request)

Many options available

More Less

Product category: Cutting machines

Swing beam cutting press – Model SA F60

This standard machine is part of SUTEAU-ANVER’s wide range of cutting presses. With a simple but sturdy design it is intended for cutting soft materials in one or more thicknesses.

Fields of application : paper, textiles, leather, gasket, foam materials, plastics, carpet, wood, felt, rubber, etc..

Easy to use, this a basic machine for your production workshop.

More Less

About us

Company details

60 years' experience in designing and making equipment for industry.
The firm SUTEAU-ANVER employs 32 staff and has a turnover of 6 M €. Its commercial department consists of 3 people for France, one of them in the Lyon region, and commercial agents in Europe ; a design office with 3 design engineers and 2 control engineers, and an assembly and after-sales department with 12 technicians with cars, very reactive on Europe under 24/48 Hours and everywhere in the world.
In 2005, still with the aim of diversifying its markets and boosting its turnover, SUTEAU-ANVER set up a new company specialising in the manufacture of machines for the food industry : OUEST AGRO TECHNOLOGIE (OAT). OAT employs 9 staff and has a turnover of 1,5 M €. It is developing production lines base on water-jet cutting.

The design and manufacture of hydraulic and mechanical cutting presses for industries working in flexible and composite materials (carpets, foam, gaskets, rubber, cardboard, leather, textiles, composites etc...
Distributing cutting tables with oscillating blades for flexible materials and composites p to 120 mm thick (different sizes)
Designing and manufacturing special machines with different environments
Designing and manufacturing machines for the leather goods and footwear industry
Designing and making water-jet cutting machines for the food industry (OAT, a 100% owned subsidiary of SUTEAU-ANVER)
Unwinder / Rewinder of flexible materials
Dealing in a variety of machines from major European manufacturers

- USM cutting machines -

More Less

Company data

Sales volume

5 - 20 Mill. US $

Export content

max. 50%

Number of employees

31 - 100



Area of business

Machinery and equipment for the plastics and rubber industries

Target groups
  • Rubber manufacturing / processing
  • Machinery construction