3-1-7, Saiwai-Cho, Naniwa-ku, 5560021 Osaka
Telephone +86 415 6191106
Fax +86 415 3103876


Hall map

K 2016 hall map (Hall 7, level 2): stand F13

Fairground map

K 2016 fairground map: Hall 7, level 2

Our range of products

Product categories

  • 01  Raw materials, auxiliaries
  • 01.10  Additives
  • 01.10.028  Fire protection agents
  • 01  Raw materials, auxiliaries
  • 01.11  Fillers
  • 01.11.005  Barium sulfate (barytes, blanc fixe)

Barium sulfate (barytes, blanc fixe)

  • 01  Raw materials, auxiliaries
  • 01.11  Fillers
  • 01.11.035  Talc
  • 01  Raw materials, auxiliaries
  • 01.11  Fillers
  • 01.11.036  Wollastonite


Our products

Product category: Fire protection agents

Inorganic fire retardant serie

Product introduction:
TC-AAA is an excellent superfine powder filler inorganic nanometer layer fire-retardant, which has good interfacial compatibility and improving adhesion and interfacial affinity after the process modification. The composite materials which joint with our products will own a good mechanical properties, thermal property and retardant property. It is environment friendly with nothing harmful.

Product application:
This product can be used as fire retardant synergist, combining with other fire retardants mixed use, such as bromine, phosphate, and to achieve better fire retardant effect, which is suitable for PP, PE, PVC, EVA, PA, PS, PC, EP, PVA, PO and so on in composite materials. This product is also available as fire retardant used in composite materials, especially used in the polyolefin, the effect is significant.

Fire retardant mechanism:
The product produces a multi-hole pattern heat resistant material in the combustion process polymer of composite materials. The molten viscosity of the composite material is reduced with the rising of temperature, and make protection layer migrated to the surface once heating. Therefore, it can generate a protective barrier in the surface of composite materials, limiting the oxygen, heat and combustible volatile degradation products to the diffusion in the material, and by promoting the formation of carbonized layer closely to suppress the degradation of polymer materials, prevent quantity of heat to infiltrate inside, so as to prevent further degradation. Therefore, the application of this product can bring lower mass loss rate and better fire-retardant performance.

Main features:
Decomposition temperature is between 550°℃ to 580 ℃, LOI is just 0.3%, fine heat resistance, and very good chemical stability. Decomposition temperature

fit the plastics processing, and it have better heat stability, which can improve fire retardant performance, anti-aging performance of the product.The product makes use of the huge surface area and macroscopic quantum tunneling effects of nano particles to absorb the dust and reduce smoke which has an excellent effect. Formed in the course of the carbon layer, not only play a part in fire retardant, but also as heat insulator, greatly slowing the diffusion of volatile decomposition products, thereby greatly reducing the amount of smoke.

There is good compatibility and dispensability in the resin. The product has the surface treatment for Nano particles and avoids the phenomenon of powder material in producing reunite when using .At the same time, it is not influenced the properties of filled polymers, but also it has excellent compatibility and dispersity.Combining with other fire retardants, which can embody various features, such as weather resistance , mobility, long validity, cost reduction etc.

Especially, combining with antimony trioxide, it replace more than 70% of antimony trioxide, it can greatly save the cost.

More Less

Product category: Fire protection agents

Aluminium silicon powder

Product introduction:
Aluminium silicon powder is a compound silicate, with magnesium silicate and aluminum silicate compound composition and structure of the chain lamellar crystal form transparent body, the density of 2.7-2.9, hardness greater than 6. It has very stable chemical properties and non reactive with acid-base, so resistant to acid and alkali. Its physical properties are also very good; it has thermostability for 1750℃good insulation,clean bright smooth appearance and good transparency.

Aluminium silicon powder is excellent filler in engineering plastics, blow plastics and engineering rubber. It’s also blending agents of rubber products and perfect stuffing of painting. Meanwhile, it is widely used in the fields of metallurgy and foundry industry, electronic industry and other fields.。

More Less

Product category: Talc

Talc powder for medicine

Talc powder can be used as fillers of medicine and food products
Recommend to use:Gum,tablet shaping agent。
Talc powder from us can be widely used in many fields and easy to processing.We will offer warm-hearted service to you the best formula if you need any technical requirements.

More Less

About us

Company details

State of the art technology Advanced equipment. Provide professional powder products solutions for you. DANDONG TIANCI FIRE-RETARDANT MATERIAL TECHNOLOGY CO., LTD. is a research and development, production and sales of integrated company mainly operate inorganic fire retardant and non-metallic mineral products. Our company operates with Japanese top production technology and scientific management, equipped with Japanese, German equipment and perfect testing instrument. We also pay attention to talent training, and gradually established the independent research and development team. Now the company passed ISO9001 quality system certification. Our products comply with SGS, REACH, RoHS standard.

More Less