The SCHUMA "TSR" is used everywhere where components need to be caught carefully after manufacture or processing (e.g. when fragile components are injection-moulded, or when components are polished. etc.).
Furthermore, oil or coolant discharge from the processing machine is to a large extent prevented by the fabric structure of the TSR (fluids can penetrate the fabric).
The TSR is made of wear-resistant polyacetal fabric and requires no maintenance.
The frame is made of hollow aluminium sections up to a size of approx. 800 x 800 mm. If larger dimensions are required, the TSR is supplied in a lacquered steel frame.
The outer dimensions are designed according to the customer's wishes, so that, for example, the frame can be secured in an injection-moulding machine. Alternatively, the frame can be supplied with telescopic legs and can be positioned in the machine's ejection chute. The discharge angle is determined by means of the threesided fixture on the frame.
If the components are to be transferred at a higher point after they have dropped, we can install the TSR in a conveyor belt hopper, from which the components are discharged by means of studs.
The SCHUMA box-stacking and change-over systems, BoSS-C and BoSS-C-Allround, were developed to buffer as many containers as possible in a limited space. The concept of the advanced unit for the containers located above guarantees a max. capacity utilisation.
As a standard, both machines are filled with containers with a base area of 600 x 400 mm but other dimensions are also possible. The number of stacked containers in the stacking unit is limited either by the total construction height with a max. of 4.000 mm or a weight of 80 kg/stack. A stacking weight of up to 140 kg/stack is possible at an extra charge.
The difference between the two systems is that the BoSS-C can only take on small load carriers. This principle was completely overhauled for the BoSS-C-Allround. It is equiped with container carriers which can be loaded with cardboard boxes or various other containers. It is possible to remove the filled containers and supply empty containers individually during automatic operation, without causing a machine breakdown.
SCHUMA Conveying Systems. Finding custom-made solutions is our strong point.
With great attention do details, we produce the most modern products on schedule. We will also be able to fulfill your requirements trough our competent advisory services and thorough, well-designed developments.
We produce efficient operating, custom-made units, which optimize production processes and have prepared ourselves for the most varied demands in regards to materials and manucturing.
Our conveyor systems are optimally adapted to the space available at each location - individual solutions are worked out.