Elstein EBI construction elements are infrared heating systems, whose housing parts are made from stainless steel. EBI Systems are corrosion resistant and mechanically as well as thermically very stable. Therefore they are very suited for applications, where such requirements have to be fulfilled; for example in the food industry.
Elstein EBI construction elements are assembled in our factory. They can be equipped with Elstein ceramic panel heaters FSM, FSR, HTS/1, SHTS/1, HSR/1 and FSM/2, FSR/2, HTS/2, SHTS/2, HSR/2, whereby it is also possible to combine different heater designs and wattages of the same types of heaters.
The user only has to do the wiring, fix the EBI elements in a steel section frame to be made on site and connect it up with the electricity mains.
Elstein EBI construction elements are available in five lengths and can be fitted together to form heating panels in any installed position as well as geometry.
Elstein HTS High Temperature Heaters are ceramic infrared panel heaters, which can be used for operating temperatures up to 900 °C and surface ratings up to 64 kW/ m².
HTS series heaters are produced using a hollow-casting ceramic process and are filled with thermal insulation material. This improves the radiant power output to the material to be heated.
Furthermore, there is a significant reduction in heat dissipated in the wiring space, so that additional insulation of the heating area is usually not required.
Compared with IR heaters, which are produced by using full-poured casting processes, HTS heaters have a considerably reduced heating-up time and, depending on the type of application, enable energy savings of up to 25 %.
Elstein HTS high temperature heaters are available in four designs and cover the power range from 60 W to 1000 W.
The TRD 1 electronic temperature controllers analyse the signal of the thermocouple being integrated in each thermocouple heater. The TRD 1 temperature controllers operate as quasi-continuous controllers and their factory settings are specially matched to the controlled process performance of Elstein Infrared Systems, so that practically no temperature fluctuations occur.
The two 0/12V DC logical outputs control the TSE thyristor switching units. In addition, two programmable floating relay contacts are available, which can be used, for example, as alarm contacts in conjunction with the limit comparators.
Further information and safety information are given in the TRD 1 operating instruction.
Elstein HLS high performance heaters are ceramic infrared rod heaters, which can be used for operating temperatures up to 1000 °C and surface ratings up to 87 kW/ m².
HLS Series heaters have a gold-plated ceramic parabolic reflector and transfer up to 80% of the energy supplied as infrared radiation to the material to be heated.
In this way, HLS heaters allow material temperatures of up to 700 °C or high throughput speeds. The typical operating temperature of 1000 °C is reached in less than one minute.
HLS Series heaters are therefore particularly suitable for use in plant construction in which special solutions have to be drawn up for the customer's specific needs and for applications requiring high outputs.
Elstein HLS high performance heaters are available in two designs with 750 W / 230 V and for pairwise serial connection with 375 W / 115 V.
Elstein HSR high speed radiators are quick-reaction ceramic infrared panel heaters, designed for operating temperatures up to 900 °C and surface ratings up to 64 kW/ m².
The external characteristics of the HSR heaters is their visible heating coil, which is installed in a ceramic body. The heat released in the wiring space by this design is up to 65 % less compared to infrared heaters with a heating coil embedded in ceramic.
HSR high speed heaters are particularly suitable for use in clocked production processes, for frequent tool changes or if the temperature has to drop quickly in case of transfer disruptions, in order to prevent damage to the production plant.
Elstein HSR high speed heaters are available in three designs and cover the power range from 125 W to 1000 W.
Elstein SHTS super high temperature heaters were developed to increase the previous maximum possible surface rating of ceramic panel heaters from 64 kW/ m² to 77 kW/ m².
The SHTS heaters, produced using the hollow casting ceramic process, are filled with thermal insulation material and have a special black glaze and a gold-plated back. At an operating temperature of 900 °C, over 75 % of the electrical energy supplied is transferred to the material to be heated as medium to long-wave IR radiation.
SHTS Series heaters are therefore particularly suitable for use in plant construction in which special solutions have to be drawn up for the customer's specific needs and for applications requiring high outputs.
The four designs cover the power range from 300 W to 1200 W and have customary market dimensions. Existing IR equipments can therefore be retrofitted with Elstein SHTS Series heaters.
Elstein BSI construction panels is infrared radiation areas, which can be equipped with the ceramic IR panel heaters HTS or HSR.
The ceramic infrared panel heaters are fixed to the MBO mounting sheets and are surrounded by a housing of frame and capping sections.
All housing parts consist of stainless steel resp. Aluminium so that heaters with high power can be used, too.
The BSI construction panels is factory assembled so that the user only has to do the wiring, insert the heating panel in a steel section frame to be made on site and connect the panel with the electricity mains.
Elstein construction panels are suited for building infrared heating areas in any dimensions.
Elstein-Werk was founded 1950 as a specialist factory for ceramic infrared heaters. Since that time ceramic infrared heaters are developed and produced on the basis of own patents as well as manufacturing processes, and they set the international state-of-the-art regarding design, performance and quality.
The heater's design and the high quality of the used raw materials define the reliability and long service life of Elstein-heaters, so that the name „ELSTEIN" became a brand name for ceramic infrared heaters, which is known worldwide.
Ceramic infrared heaters are electrically operated heating elements, which are used for various heating and drying tasks; for example: industrial applications like thermoforming of plastics, medical warming devices like incubators or infrared saunas in the wellness sector – Elstein infrared heaters are used successfully in many places for decades.
SERVICES of Elstein-Werk
DEVELOPMENT of ceramic infrared heaters and accessories on the basis of own ideas and according to customer’s specifications
PRODUCTION of ceramic infrared heaters of the brand ELSTEIN
ASSEMBLY of infrared radiation systems by using ceramic infrared heaters of the brand ELSTEIN
SALES of accessories for heater’s mounting, control and electrical connection
Worldwide DISTRIBUTION via exclusive agencies and trading companies
Technical CONSULTING: Describe your heating task and we develop a solution proposal
Laboratory for trials with your material to be heated
Devices on loan, which you can use for trials at your location